Merge branch 'develop' into issue/1354

CHANGELOG.md

@@ -7,6 +7,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/).
 ### Removed
 - **Breaking**: Removed 1.0+ deprecated configurations `Pleroma.Upload, :strip_exif` and `:instance, :dedupe_media`
 - **Breaking**: OStatus protocol support
+- **Breaking**: MDII uploader
 
 ### Changed
 - **Breaking:** Elixir >=1.8 is now required (was >= 1.7)
@@ -21,6 +22,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/).
 - Deprecated `User.Info` embedded schema (fields moved to `User`)
 - Store status data inside Flag activity
 - Deprecated (reorganized as `UserRelationship` entity) User fields with user AP IDs (`blocks`, `mutes`, `muted_reblogs`, `muted_notifications`, `subscribers`).
+- Logger: default log level changed from `warn` to `info`.
 <details>
   <summary>API Changes</summary>
 
@@ -51,6 +53,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/).
 - Support for `X-Forwarded-For` and similar HTTP headers which used by reverse proxies to pass a real user IP address to the backend. Must not be enabled unless your instance is behind at least one reverse proxy (such as Nginx, Apache HTTPD or Varnish Cache).
 - MRF: New module which handles incoming posts based on their age. By default, all incoming posts that are older than 2 days will be unlisted and not shown to their followers.
 - User notification settings: Add `privacy_option` option.
+- Support for custom Elixir modules (such as MRF policies)
 - User settings: Add _This account is a_ option.
 - OAuth: admin scopes support (relevant setting: `[:auth, :enforce_oauth_admin_scope_usage]`).
 <details>

config/config.exs

@@ -67,7 +67,7 @@
 
 config :pleroma, Pleroma.Captcha,
   enabled: true,
-  seconds_valid: 60,
+  seconds_valid: 300,
   method: Pleroma.Captcha.Native
 
 config :pleroma, Pleroma.Captcha.Kocaptcha, endpoint: "https://captcha.kotobank.ch"
@@ -108,10 +108,6 @@
   streaming_enabled: true,
   public_endpoint: "https://s3.amazonaws.com"
 
-config :pleroma, Pleroma.Uploaders.MDII,
-  cgi: "https://mdii.sakura.ne.jp/mdii-post.cgi",
-  files: "https://mdii.sakura.ne.jp"
-
 config :pleroma, :emoji,
   shortcode_globs: ["/emoji/custom/**/*.png"],
   pack_extensions: [".png", ".gif"],
@@ -621,6 +617,8 @@
   activity_pub: nil,
   activity_pub_question: 30_000
 
+config :pleroma, :modules, runtime_dir: "instance/modules"
+
 config :swarm, node_blacklist: [~r/myhtml_.*$/]
 # Import environment specific config. This must remain at the bottom
 # of this file so it overrides the configuration defined above.

config/description.exs

@@ -2557,23 +2557,6 @@
       }
     ]
   },
-  %{
-    group: :pleroma,
-    key: Pleroma.Uploaders.MDII,
-    type: :group,
-    children: [
-      %{
-        key: :cgi,
-        type: :string,
-        suggestions: ["https://mdii.sakura.ne.jp/mdii-post.cgi"]
-      },
-      %{
-        key: :files,
-        type: :string,
-        suggestions: ["https://mdii.sakura.ne.jp"]
-      }
-    ]
-  },
   %{
     group: :pleroma,
     key: :http,

config/prod.exs

@@ -20,8 +20,8 @@
 config :phoenix, serve_endpoints: true
 
 # Do not print debug messages in production
-config :logger, :console, level: :warn
+config :logger, :console, level: :info
-config :logger, :ex_syslogger, level: :warn
+config :logger, :ex_syslogger, level: :info
 
 # ## SSL Support
 #

config/releases.exs

@@ -2,6 +2,7 @@
 
 config :pleroma, :instance, static_dir: "/var/lib/pleroma/static"
 config :pleroma, Pleroma.Uploaders.Local, uploads: "/var/lib/pleroma/uploads"
+config :pleroma, :modules, runtime_dir: "/var/lib/pleroma/modules"
 
 config_path = System.get_env("PLEROMA_CONFIG_PATH") || "/etc/pleroma/config.exs"
 

config/test.exs

@@ -95,6 +95,8 @@
 
 config :pleroma, Pleroma.ReverseProxy.Client, Pleroma.ReverseProxy.ClientMock
 
+config :pleroma, :modules, runtime_dir: "test/fixtures/modules"
+
 if File.exists?("./config/test.secret.exs") do
   import_config "test.secret.exs"
 else

docs/API/differences_in_mastoapi_responses.md

@@ -46,7 +46,7 @@ The `id` parameter can also be the `nickname` of the user. This only works in th
 Has these additional fields under the `pleroma` object:
 
 - `tags`: Lists an array of tags for the user
-- `relationship{}`: Includes fields as documented for Mastodon API https://docs.joinmastodon.org/api/entities/#relationship
+- `relationship{}`: Includes fields as documented for Mastodon API https://docs.joinmastodon.org/entities/relationship/
 - `is_moderator`: boolean, nullable,  true if user is a moderator
 - `is_admin`: boolean, nullable, true if user is an admin
 - `confirmation_pending`: boolean, true if a new user account is waiting on email confirmation to be activated

docs/API/pleroma_api.md

@@ -70,59 +70,6 @@ Request parameters can be passed via [query strings](https://en.wikipedia.org/wi
 * Response: JSON. Returns `{"status": "success"}` if the account was successfully disabled, `{"error": "[error message]"}` otherwise
 * Example response: `{"error": "Invalid password."}`
 
-## `/api/account/register`
-### Register a new user
-* Method `POST`
-* Authentication: not required
-* Params:
-    * `nickname`
-    * `fullname`
-    * `bio`
-    * `email`
-    * `password`
-    * `confirm`
-    * `captcha_solution`: optional, contains provider-specific captcha solution,
-    * `captcha_token`: optional, contains provider-specific captcha token
-    * `token`: invite token required when the registrations aren't public.
-* Response: JSON. Returns a user object on success, otherwise returns `{"error": "error_msg"}`
-* Example response:
-```json
-{
-	"background_image": null,
-	"cover_photo": "https://pleroma.soykaf.com/images/banner.png",
-	"created_at": "Tue Dec 18 16:55:56 +0000 2018",
-	"default_scope": "public",
-	"description": "blushy-crushy fediverse idol + pleroma dev\nlet's be friends \nぷれろまの生徒会長。謎の外人。日本語OK. \n公主病.",
-	"description_html": "blushy-crushy fediverse idol + pleroma dev.<br />let's be friends <br />ぷれろまの生徒会長。謎の外人。日本語OK. <br />公主病.",
-	"favourites_count": 0,
-	"fields": [],
-	"followers_count": 0,
-	"following": false,
-	"follows_you": false,
-	"friends_count": 0,
-	"id": 6,
-	"is_local": true,
-	"locked": false,
-	"name": "lain",
-	"name_html": "lain",
-	"no_rich_text": false,
-	"pleroma": {
-		"tags": []
-	},
-	"profile_image_url": "https://pleroma.soykaf.com/images/avi.png",
-	"profile_image_url_https": "https://pleroma.soykaf.com/images/avi.png",
-	"profile_image_url_original": "https://pleroma.soykaf.com/images/avi.png",
-	"profile_image_url_profile_size": "https://pleroma.soykaf.com/images/avi.png",
-	"rights": {
-		"delete_others_notice": false
-	},
-	"screen_name": "lain",
-	"statuses_count": 0,
-	"statusnet_blocking": false,
-	"statusnet_profile_url": "https://pleroma.soykaf.com/users/lain"
-}
-```
-
 ## `/api/pleroma/admin/`…
 See [Admin-API](admin_api.md)
 

docs/administration/CLI_tasks/digest.md

@@ -14,6 +14,7 @@ mix pleroma.digest test <nickname> [<since_date>]
 
 
 Example: 
+
 ```sh tab="OTP"
 ./bin/pleroma_ctl digest test donaldtheduck 2019-05-20
 ```

docs/configuration/cheatsheet.md

@@ -453,6 +453,7 @@ An example for Sendgrid adapter:
 
 ```elixir
 config :pleroma, Pleroma.Emails.Mailer,
+  enabled: true,
   adapter: Swoosh.Adapters.Sendgrid,
   api_key: "YOUR_API_KEY"
 ```
@@ -461,13 +462,13 @@ An example for SMTP adapter:
 
 ```elixir
 config :pleroma, Pleroma.Emails.Mailer,
+  enabled: true,
   adapter: Swoosh.Adapters.SMTP,
   relay: "smtp.gmail.com",
   username: "YOUR_USERNAME@gmail.com",
   password: "YOUR_SMTP_PASSWORD",
   port: 465,
   ssl: true,
-  tls: :always,
   auth: :always
 ```
 
@@ -836,3 +837,7 @@ config :auto_linker,
     rel: "ugc"
   ]
 ```
+
+## Custom Runtime Modules (`:modules`)
+
+* `runtime_dir`: A path to custom Elixir modules (such as MRF policies).

docs/installation/centos7_en.md

@@ -1,274 +0,0 @@
-# Installing on CentOS 7
-## Installation
-
-This guide is a step-by-step installation guide for CentOS 7. It also assumes that you have administrative rights, either as root or a user with [sudo permissions](https://www.digitalocean.com/community/tutorials/how-to-create-a-sudo-user-on-centos-quickstart). If you want to run this guide with root, ignore the `sudo` at the beginning of the lines, unless it calls a user like `sudo -Hu pleroma`; in this case, use `su <username> -s $SHELL -c 'command'` instead.
-
-### Required packages
-
-* `postgresql` (9,6+, CentOS 7 comes with 9.2, we will install version 11 in this guide)
-* `elixir` (1.5+)
-* `erlang`
-* `erlang-parsetools`
-* `erlang-xmerl`
-* `git`
-* Development Tools
-
-#### Optional packages used in this guide
-
-* `nginx` (preferred, example configs for other reverse proxies can be found in the repo)
-* `certbot` (or any other ACME client for Let’s Encrypt certificates)
-
-### Prepare the system
-
-* First update the system, if not already done:
-
-```shell
-sudo yum update
-```
-
-* Install some of the above mentioned programs:
-
-```shell
-sudo yum install wget git unzip
-```
-
-* Install development tools:
-
-```shell
-sudo yum group install "Development Tools"
-```
-
-### Install Elixir and Erlang
-
-* Add the EPEL repo:
-
-```shell
-sudo yum install epel-release
-sudo yum -y update
-```
-
-* Install Erlang repository:
-
-```shell
-wget -P /tmp/ https://packages.erlang-solutions.com/erlang-solutions-1.0-1.noarch.rpm
-sudo rpm -Uvh erlang-solutions-1.0-1.noarch.rpm
-```
-
-* Install Erlang:
-
-```shell
-sudo yum install erlang erlang-parsetools erlang-xmerl
-```
-
-* Download [latest Elixir release from Github](https://github.com/elixir-lang/elixir/releases/tag/v1.8.1) (Example for the newest version at the time when this manual was written)
-
-```shell
-wget -P /tmp/ https://github.com/elixir-lang/elixir/releases/download/v1.8.1/Precompiled.zip
-```
-
-* Create folder where you want to install Elixir, we’ll use:
-
-```shell
-sudo mkdir -p /opt/elixir
-```
-
-* Unzip downloaded file there:
-
-```shell
-sudo unzip /tmp/Precompiled.zip -d /opt/elixir
-```
-
-* Create symlinks for the pre-compiled binaries:
-
-```shell
-for e in elixir elixirc iex mix; do sudo ln -s /opt/elixir/bin/${e} /usr/local/bin/${e}; done
-```
-
-### Install PostgreSQL
-
-* Add the Postgresql repository:
-
-```shell
-sudo yum install https://download.postgresql.org/pub/repos/yum/11/redhat/rhel-7-x86_64/pgdg-centos11-11-2.noarch.rpm
-```
-
-* Install the Postgresql server:
-
-```shell
-sudo yum install postgresql11-server postgresql11-contrib
-```
-
-* Initialize database:
-
-```shell
-sudo /usr/pgsql-11/bin/postgresql-11-setup initdb
-```
-
-* Open configuration file `/var/lib/pgsql/11/data/pg_hba.conf` and change the following lines from:
-
-```plain
-# IPv4 local connections:
-host    all             all             127.0.0.1/32            ident
-# IPv6 local connections:
-host    all             all             ::1/128                 ident
-```
-
-to
-
-```plain
-# IPv4 local connections:
-host    all             all             127.0.0.1/32            md5
-# IPv6 local connections:
-host    all             all             ::1/128                 md5
-```
-
-* Enable and start postgresql server:
-
-```shell
-sudo systemctl enable --now postgresql-11.service
-```
-
-### Install PleromaBE
-
-* Add a new system user for the Pleroma service:
-
-```shell
-sudo useradd -r -s /bin/false -m -d /var/lib/pleroma -U pleroma
-```
-
-**Note**: To execute a single command as the Pleroma system user, use `sudo -Hu pleroma command`. You can also switch to a shell by using `sudo -Hu pleroma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l pleroma -s $SHELL -c 'command'` and `su -l pleroma -s $SHELL` for starting a shell.
-
-* Git clone the PleromaBE repository and make the Pleroma user the owner of the directory:
-
-```shell
-sudo mkdir -p /opt/pleroma
-sudo chown -R pleroma:pleroma /opt/pleroma
-sudo -Hu pleroma git clone -b stable https://git.pleroma.social/pleroma/pleroma /opt/pleroma
-```
-
-* Change to the new directory:
-
-```shell
-cd /opt/pleroma
-```
-
-* Install the dependencies for Pleroma and answer with `yes` if it asks you to install `Hex`:
-
-```shell
-sudo -Hu pleroma mix deps.get
-```
-
-* Generate the configuration: `sudo -Hu pleroma mix pleroma.instance gen`
-  * Answer with `yes` if it asks you to install `rebar3`.
-  * This may take some time, because parts of pleroma get compiled first.
-  * After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
-
-* Check the configuration and if all looks right, rename it, so Pleroma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
-
-```shell
-mv config/{generated_config.exs,prod.secret.exs}
-```
-
-* The previous command creates also the file `config/setup_db.psql`, with which you can create the database:
-
-```shell
-sudo -Hu postgres psql -f config/setup_db.psql
-```
-
-* Now run the database migration:
-
-```shell
-sudo -Hu pleroma MIX_ENV=prod mix ecto.migrate
-```
-
-* Now you can start Pleroma already
-
-```shell
-sudo -Hu pleroma MIX_ENV=prod mix phx.server
-```
-
-### Finalize installation
-
-If you want to open your newly installed instance to the world, you should run nginx or some other webserver/proxy in front of Pleroma and you should consider to create a systemd service file for Pleroma.
-
-#### Nginx
-
-* Install nginx, if not already done:
-
-```shell
-sudo yum install nginx
-```
-
-* Setup your SSL cert, using your method of choice or certbot. If using certbot, first install it:
-
-```shell
-sudo yum install certbot-nginx
-```
-
-and then set it up:
-
-```shell
-sudo mkdir -p /var/lib/letsencrypt/
-sudo certbot certonly --email <your@emailaddress> -d <yourdomain> --standalone
-```
-
-If that doesn’t work, make sure, that nginx is not already running. If it still doesn’t work, try setting up nginx first (change ssl “on” to “off” and try again).
-
----
-
-* Copy the example nginx configuration to the nginx folder
-
-```shell
-sudo cp /opt/pleroma/installation/pleroma.nginx /etc/nginx/conf.d/pleroma.conf
-```
-
-* Before starting nginx edit the configuration and change it to your needs (e.g. change servername, change cert paths)
-* Enable and start nginx:
-
-```shell
-sudo systemctl enable --now nginx
-```
-
-If you need to renew the certificate in the future, uncomment the relevant location block in the nginx config and run:
-
-```shell
-sudo certbot certonly --email <your@emailaddress> -d <yourdomain> --webroot -w /var/lib/letsencrypt/
-```
-
-#### Other webserver/proxies
-
-You can find example configurations for them in `/opt/pleroma/installation/`.
-
-#### Systemd service
-
-* Copy example service file
-
-```shell
-sudo cp /opt/pleroma/installation/pleroma.service /etc/systemd/system/pleroma.service
-```
-
-* Edit the service file and make sure that all paths fit your installation
-* Enable and start `pleroma.service`:
-
-```shell
-sudo systemctl enable --now pleroma.service
-```
-
-#### Create your first user
-
-If your instance is up and running, you can create your first user with administrative rights with the following task:
-
-```shell
-sudo -Hu pleroma MIX_ENV=prod mix pleroma.user new <username> <your@emailaddress> --admin
-```
-
-#### Further reading
-
-* [Backup your instance](../administration/backup.md)
-* [Hardening your instance](../configuration/hardening.md)
-* [How to activate mediaproxy](../configuration/howto_mediaproxy.md)
-* [Updating your instance](../administration/updating.md)
-
-## Questions
-
-Questions about the installation or didn’t it work as it should be, ask in [#pleroma:matrix.org](https://matrix.heldscal.la/#/room/#freenode_#pleroma:matrix.org) or IRC Channel **#pleroma** on **Freenode**.

docs/installation/migrating_from_source_otp_en.md

@@ -1,42 +1,28 @@
 # Switching a from-source install to OTP releases
+
 ## What are OTP releases?
 OTP releases are as close as you can get to binary releases with Erlang/Elixir. The release is self-contained, and provides everything needed to boot it, it is easily administered via the provided shell script to open up a remote console, start/stop/restart the release, start in the background, send remote commands, and more.
-### Can I still run the develop branch if I decide to use them?
-Yes, we produce builds for every commit in `develop`. However `develop` is considered unstable, please don't use it in production because of faster access to new features, unless you need them as an app developer.
-## Why would one want to switch?
-Benefits of OTP releases over from-source installs include:
-* **Less space used.** OTP releases come without source code, build tools, have docs and debug symbols stripped from the compiled bytecode and do not cointain tests, docs, revision history.
-* **Minimal system dependencies.** Excluding the database and reverse proxy, only `curl`, `unzip` and `ncurses` are needed to download and run the release. Because Erlang runtime and Elixir are shipped with Pleroma, one can use the latest BEAM optimizations and Pleroma features, without having to worry about outdated system repos or a missing `erlang-*` package.
-* **Potentially less bugs and better performance.** This extends on the previous point, because we have control over exactly what gets shipped, we can tweak the VM arguments and forget about weird bugs due to Erlang/Elixir version mismatches.
-* **Faster and less bug-prone mix tasks.** On a from-source install one has to wait untill a new Pleroma node is started for each mix task and they execute outside of the instance context (for example if a user was deleted via a mix task, the instance will have no knowledge of that and continue to display status count and follows before the cache expires). Mix tasks in OTP releases are executed by calling into a running instance via RPC, which solves both of these problems.
 
-### Sounds great, how do I switch?
-Currently we support Linux machines with GNU (e.g. Debian, Ubuntu) or musl (e.g. Alpine) libc and `x86_64`, `aarch64` or `armv7l` CPUs. If you are unsure, check the [Detecting flavour](otp_en.md#detecting-flavour) section in OTP install guide. If your platform is supported, proceed with the guide, if not check the [My platform is not supported](#my-platform-is-not-supported) section.
-### I don't think it is worth the effort, can I stay on a from-source install?
-Yes, currently there are no plans to deprecate them.
-
-### My platform is not supported
-If you think your platform is a popular choice for running Pleroma instances, or has the potential to become one, you can [file an issue on our Gitlab](https://git.pleroma.social/pleroma/pleroma/issues/new). If not, guides on how to build and update releases by yourself will be available soon.
 ## Pre-requisites
 You will be running commands as root. If you aren't root already, please elevate your priviledges by executing `sudo su`/`su`.
 
 The system needs to have `curl` and `unzip` installed for downloading and unpacking release builds.
 
-Debian/Ubuntu:
+```sh tab="Alpine"
-```sh
+apk add curl unzip
+```
+
+```sh tab="Debian/Ubuntu"
 apt install curl unzip
 ```
-Alpine:
-```
-apk add curl unzip
 
-```
 ## Moving content out of the application directory
 When using OTP releases the application directory changes with every version so it would be a bother to keep content there (and also dangerous unless `--no-rm` option is used when updating). Fortunately almost all paths in Pleroma are configurable, so it is possible to move them out of there.
 
 Pleroma should be stopped before proceeding.
 
 ### Moving uploads/custom public files directory
+
 ```sh
 # Create uploads directory and set proper permissions (skip if using a remote uploader)
 # Note: It does not have to be `/var/lib/pleroma/uploads`, you can configure it to be something else later
@@ -92,8 +78,8 @@ Before proceeding, get the flavour from [Detecting flavour](otp_en.md#detecting-
 rm -r ~pleroma/*
 
 # Set the flavour environment variable to the string you got in Detecting flavour section.
-# For example if the flavour is `arm64-musl` the command will be
+# For example if the flavour is `amd64-musl` the command will be
-export FLAVOUR="arm64-musl"
+export FLAVOUR="amd64-musl"
 
 # Clone the release build into a temporary directory and unpack it
 # Replace `stable` with `unstable` if you want to run the unstable branch
@@ -124,8 +110,15 @@ OTP releases have different service files than from-source installs so they need
 
 **Warning:** The service files assume pleroma user's home directory is `/opt/pleroma`, please make sure all paths fit your installation.
 
-Debian/Ubuntu:
+```sh tab="Alpine"
-```sh
+# Copy the service into a proper directory
+cp -f ~pleroma/installation/init.d/pleroma /etc/init.d/pleroma
+
+# Start pleroma
+rc-service pleroma start
+```
+
+```sh tab="Debian/Ubuntu"
 # Copy the service into a proper directory
 cp ~pleroma/installation/pleroma.service /etc/systemd/system/pleroma.service
 
@@ -139,14 +132,6 @@ systemctl reenable pleroma
 systemctl start pleroma
 ```
 
-Alpine:
-```sh
-# Copy the service into a proper directory
-cp -f ~pleroma/installation/init.d/pleroma /etc/init.d/pleroma
-
-# Start pleroma
-rc-service pleroma start
-```
 ## Running mix tasks
 Refer to [Running mix tasks](otp_en.md#running-mix-tasks) section from OTP release installation guide.
 ## Updating

docs/installation/otp_en.md

@@ -6,7 +6,7 @@
 
 You will be running commands as root. If you aren't root already, please elevate your priviledges by executing `sudo su`/`su`.
 
-While in theory OTP releases are possbile to install on any compatible machine, for the sake of simplicity this guide focuses only on Debian/Ubuntu/Alpine.
+While in theory OTP releases are possbile to install on any compatible machine, for the sake of simplicity this guide focuses only on Debian/Ubuntu and Alpine.
 
 ### Detecting flavour
 
@@ -20,6 +20,7 @@ If your platform is supported the output will contain the flavour string, you wi
 ### Installing the required packages
 
 Other than things bundled in the OTP release Pleroma depends on:
+
 * curl (to download the release build)
 * unzip (needed to unpack release builds)
 * ncurses (ERTS won't run without it)
@@ -27,18 +28,16 @@ Other than things bundled in the OTP release Pleroma depends on:
 * nginx (could be swapped with another reverse proxy but this guide covers only it)
 * certbot (for Let's Encrypt certificates, could be swapped with another ACME client, but this guide covers only it)
 
-Debian/Ubuntu:
+```sh tab="Alpine"
-```sh
-apt install curl unzip libncurses5 postgresql postgresql-contrib nginx certbot
-```
-Alpine:
-
-```sh
 echo "http://nl.alpinelinux.org/alpine/latest-stable/community" >> /etc/apk/repositories
 apk update
 apk add curl unzip ncurses postgresql postgresql-contrib nginx certbot
 ```
 
+```sh tab="Debian/Ubuntu"
+apt install curl unzip libncurses5 postgresql postgresql-contrib nginx certbot
+```
+
 ## Setup
 ### Configuring PostgreSQL
 #### (Optional) Installing RUM indexes
@@ -48,12 +47,7 @@ apk add curl unzip ncurses postgresql postgresql-contrib nginx certbot
 
 RUM indexes are an alternative indexing scheme that is not included in PostgreSQL by default. You can read more about them on the [Configuration page](../configuration/cheatsheet.md#rum-indexing-for-full-text-search). They are completely optional and most of the time are not worth it, especially if you are running a single user instance (unless you absolutely need ordered search results).
 
-Debian/Ubuntu (available only on Buster/19.04):
+```sh tab="Alpine"
-```sh
-apt install postgresql-11-rum
-```
-Alpine:
-```sh
 apk add git build-base postgresql-dev
 git clone https://github.com/postgrespro/rum /tmp/rum
 cd /tmp/rum
@@ -62,25 +56,31 @@ make USE_PGXS=1 install
 cd
 rm -r /tmp/rum
 ```
+
+```sh tab="Debian/Ubuntu"
+# Available only on Buster/19.04
+apt install postgresql-11-rum
+```
+
 #### (Optional) Performance configuration
 For optimal performance, you may use [PGTune](https://pgtune.leopard.in.ua), don't forget to restart postgresql after editing the configuration
 
-Debian/Ubuntu:
+```sh tab="Alpine"
-```sh
-systemctl restart postgresql
-```
-Alpine:
-```sh
 rc-service postgresql restart
 ```
+
+```sh tab="Debian/Ubuntu"
+systemctl restart postgresql
+```
+
 ### Installing Pleroma
 ```sh
-# Create the Pleroma user
+# Create a Pleroma user
 adduser --system --shell  /bin/false --home /opt/pleroma pleroma
 
 # Set the flavour environment variable to the string you got in Detecting flavour section.
-# For example if the flavour is `arm64-musl` the command will be
+# For example if the flavour is `amd64-musl` the command will be
-export FLAVOUR="arm64-musl"
+export FLAVOUR="amd64-musl"
 
 # Clone the release build into a temporary directory and unpack it
 su pleroma -s $SHELL -lc "
@@ -133,49 +133,52 @@ su pleroma -s $SHELL -lc "./bin/pleroma stop"
 
 ### Setting up nginx and getting Let's Encrypt SSL certificaties
 
+#### Get a Let's Encrypt certificate
 ```sh
-# Get a Let's Encrypt certificate
 certbot certonly --standalone --preferred-challenges http -d yourinstance.tld
+```
 
-# Copy the Pleroma nginx configuration to the nginx folder
+#### Copy Pleroma nginx configuration to the nginx folder
-# The location of nginx configs is dependent on the distro
 
-# For Debian/Ubuntu:
+The location of nginx configs is dependent on the distro
+
+```sh tab="Alpine"
+cp /opt/pleroma/installation/pleroma.nginx /etc/nginx/conf.d/pleroma.conf
+```
+
+```sh tab="Debian/Ubuntu"
 cp /opt/pleroma/installation/pleroma.nginx /etc/nginx/sites-available/pleroma.nginx
 ln -s /etc/nginx/sites-available/pleroma.nginx /etc/nginx/sites-enabled/pleroma.nginx
-# For Alpine:
+```
-cp /opt/pleroma/installation/pleroma.nginx /etc/nginx/conf.d/pleroma.conf
-# If your distro does not have either of those you can append
-# `include /etc/nginx/pleroma.conf` to the end of the http section in /etc/nginx/nginx.conf and
-cp /opt/pleroma/installation/pleroma.nginx /etc/nginx/pleroma.conf
 
-# Edit the nginx config replacing example.tld with your (sub)domain
+If your distro does not have either of those you can append `include /etc/nginx/pleroma.conf` to the end of the http section in /etc/nginx/nginx.conf and
+```sh
+cp /opt/pleroma/installation/pleroma.nginx /etc/nginx/pleroma.conf
+```
+
+#### Edit the nginx config
+```sh
+# Replace example.tld with your (sub)domain
 $EDITOR path-to-nginx-config
 
 # Verify that the config is valid
 nginx -t
+```
+#### Start nginx
 
-# Start nginx
+```sh tab="Alpine"
-# For Debian/Ubuntu:
-systemctl start nginx
-# For Alpine:
 rc-service nginx start
 ```
 
-At this point if you open your (sub)domain in a browser you should see a 502 error, that's because pleroma is not started yet.
+```sh tab="Debian/Ubuntu"
+systemctl start nginx
+```
+
+At this point if you open your (sub)domain in a browser you should see a 502 error, that's because Pleroma is not started yet.
 
 ### Setting up a system service
-Debian/Ubuntu:
-```sh
-# Copy the service into a proper directory
-cp /opt/pleroma/installation/pleroma.service /etc/systemd/system/pleroma.service
 
-# Start pleroma and enable it on boot
+```sh tab="Alpine"
-systemctl start pleroma
-systemctl enable pleroma
-```
-Alpine:
-```sh
 # Copy the service into a proper directory
 cp /opt/pleroma/installation/init.d/pleroma /etc/init.d/pleroma
 
@@ -184,13 +187,22 @@ rc-service pleroma start
 rc-update add pleroma
 ```
 
+```sh tab="Debian/Ubuntu"
+# Copy the service into a proper directory
+cp /opt/pleroma/installation/pleroma.service /etc/systemd/system/pleroma.service
+
+# Start pleroma and enable it on boot
+systemctl start pleroma
+systemctl enable pleroma
+```
+
 If everything worked, you should see Pleroma-FE when visiting your domain. If that didn't happen, try reviewing the installation steps, starting Pleroma in the foreground and seeing if there are any errrors.
 
-Still doesn't work? Feel free to contact us on [#pleroma on freenode](https://webchat.freenode.net/?channels=%23pleroma) or via matrix at <https://matrix.heldscal.la/#/room/#freenode_#pleroma:matrix.org>, you can also [file an issue on our Gitlab](https://git.pleroma.social/pleroma/pleroma/issues/new)
+Still doesn't work? Feel free to contact us on [#pleroma on freenode](https://irc.pleroma.social) or via matrix at <https://matrix.heldscal.la/#/room/#freenode_#pleroma:matrix.org>, you can also [file an issue on our Gitlab](https://git.pleroma.social/pleroma/pleroma-support/issues/new)
 
 ## Post installation
 
-### Setting up auto-renew Let's Encrypt certificate
+### Setting up auto-renew of the Let's Encrypt certificate
 ```sh
 # Create the directory for webroot challenges
 mkdir -p /var/lib/letsencrypt
@@ -201,25 +213,8 @@ $EDITOR path-to-nginx-config
 # Verify that the config is valid
 nginx -t
 ```
-Debian/Ubuntu:
-```sh
-# Restart nginx
-systemctl restart nginx
 
-# Ensure the webroot menthod and post hook is working
+```sh tab="Alpine"
-certbot renew --cert-name yourinstance.tld --webroot -w /var/lib/letsencrypt/ --dry-run --post-hook 'systemctl nginx reload'
-
-# Add it to the daily cron
-echo '#!/bin/sh
-certbot renew --cert-name yourinstance.tld --webroot -w /var/lib/letsencrypt/ --post-hook "systemctl reload nginx"
-' > /etc/cron.daily/renew-pleroma-cert
-chmod +x /etc/cron.daily/renew-pleroma-cert
-
-# If everything worked the output should contain /etc/cron.daily/renew-pleroma-cert
-run-parts --test /etc/cron.daily
-```
-Alpine:
-```sh
 # Restart nginx
 rc-service nginx restart
 
@@ -236,15 +231,25 @@ certbot renew --cert-name yourinstance.tld --webroot -w /var/lib/letsencrypt/ --
 ' > /etc/periodic/daily/renew-pleroma-cert
 chmod +x /etc/periodic/daily/renew-pleroma-cert
 
-# If everything worked this should output /etc/periodic/daily/renew-pleroma-cert
+# If everything worked the output should contain /etc/cron.daily/renew-pleroma-cert
 run-parts --test /etc/periodic/daily
 ```
-### Running mix tasks
-Throughout the wiki and guides there is a lot of references to mix tasks. Since `mix` is a build tool, you can't just call `mix pleroma.task`, instead you should call `pleroma_ctl` stripping pleroma/ecto namespace.
 
-So for example, if the task is `mix pleroma.user set admin --admin`, you should run it like this:
+```sh tab="Debian/Ubuntu"
-```sh
+# Restart nginx
-su pleroma -s $SHELL -lc "./bin/pleroma_ctl user set admin --admin"
+systemctl restart nginx
+
+# Ensure the webroot menthod and post hook is working
+certbot renew --cert-name yourinstance.tld --webroot -w /var/lib/letsencrypt/ --dry-run --post-hook 'systemctl reload nginx'
+
+# Add it to the daily cron
+echo '#!/bin/sh
+certbot renew --cert-name yourinstance.tld --webroot -w /var/lib/letsencrypt/ --post-hook "systemctl reload nginx"
+' > /etc/cron.daily/renew-pleroma-cert
+chmod +x /etc/cron.daily/renew-pleroma-cert
+
+# If everything worked the output should contain /etc/cron.daily/renew-pleroma-cert
+run-parts --test /etc/cron.daily
 ```
 
 ## Create your first user and set as admin
@@ -270,4 +275,3 @@ But you should **always check the release notes/changelog** in case there are co
 * [Backup your instance](../administration/backup.md)
 * [Hardening your instance](../configuration/hardening.md)
 * [How to activate mediaproxy](../configuration/howto_mediaproxy.md)
-* [Updating your instance](../administration/updating.md)

lib/pleroma/application.ex

@@ -5,6 +5,7 @@
 defmodule Pleroma.Application do
   import Cachex.Spec
   use Application
+  require Logger
 
   @name Mix.Project.config()[:name]
   @version Mix.Project.config()[:version]
@@ -33,6 +34,7 @@ def start(_type, _args) do
     Pleroma.HTML.compile_scrubbers()
     Pleroma.Config.DeprecationWarnings.warn()
     setup_instrumenters()
+    load_custom_modules()
 
     # Define workers and child supervisors to be supervised
     children =
@@ -68,6 +70,28 @@ def start(_type, _args) do
     Supervisor.start_link(children, opts)
   end
 
+  def load_custom_modules do
+    dir = Pleroma.Config.get([:modules, :runtime_dir])
+
+    if dir && File.exists?(dir) do
+      dir
+      |> Pleroma.Utils.compile_dir()
+      |> case do
+        {:error, _errors, _warnings} ->
+          raise "Invalid custom modules"
+
+        {:ok, modules, _warnings} ->
+          if @env != :test do
+            Enum.each(modules, fn mod ->
+              Logger.info("Custom module loaded: #{inspect(mod)}")
+            end)
+          end
+
+          :ok
+      end
+    end
+  end
+
   defp setup_instrumenters do
     require Prometheus.Registry
 

lib/pleroma/html.ex

@@ -10,9 +10,7 @@ def compile_scrubbers do
     dir = Path.join(:code.priv_dir(:pleroma), "scrubbers")
 
     dir
-    |> File.ls!()
+    |> Pleroma.Utils.compile_dir()
-    |> Enum.map(&Path.join(dir, &1))
-    |> Kernel.ParallelCompiler.compile()
     |> case do
       {:error, _errors, _warnings} ->
         raise "Compiling scrubbers failed"

lib/pleroma/object/fetcher.ex

@@ -154,7 +154,7 @@ defp maybe_date_fetch(headers, date) do
   end
 
   def fetch_and_contain_remote_object_from_id(id) when is_binary(id) do
-    Logger.info("Fetching object #{id} via AP")
+    Logger.debug("Fetching object #{id} via AP")
 
     date = Pleroma.Signature.signed_date()
 

lib/pleroma/plugs/oauth_scopes_plug.ex

@@ -18,16 +18,13 @@ def call(%Plug.Conn{assigns: assigns} = conn, %{scopes: scopes} = options) do
     token = assigns[:token]
 
     scopes = transform_scopes(scopes, options)
-    matched_scopes = token && filter_descendants(scopes, token.scopes)
+    matched_scopes = (token && filter_descendants(scopes, token.scopes)) || []
 
     cond do
-      is_nil(token) ->
+      token && op == :| && Enum.any?(matched_scopes) ->
-        maybe_perform_instance_privacy_check(conn, options)
-
-      op == :| && Enum.any?(matched_scopes) ->
         conn
 
-      op == :& && matched_scopes == scopes ->
+      token && op == :& && matched_scopes == scopes ->
         conn
 
       options[:fallback] == :proceed_unauthenticated ->

lib/pleroma/uploaders/mdii.ex

@@ -1,37 +0,0 @@
-# Pleroma: A lightweight social networking server
-# Copyright © 2017-2019 Pleroma Authors <https://pleroma.social/>
-# SPDX-License-Identifier: AGPL-3.0-only
-
-defmodule Pleroma.Uploaders.MDII do
-  @moduledoc "Represents uploader for https://github.com/hakaba-hitoyo/minimal-digital-image-infrastructure"
-
-  alias Pleroma.Config
-  alias Pleroma.HTTP
-
-  @behaviour Pleroma.Uploaders.Uploader
-
-  # MDII-hosted images are never passed through the MediaPlug; only local media.
-  # Delegate to Pleroma.Uploaders.Local
-  def get_file(file) do
-    Pleroma.Uploaders.Local.get_file(file)
-  end
-
-  def put_file(upload) do
-    cgi = Config.get([Pleroma.Uploaders.MDII, :cgi])
-    files = Config.get([Pleroma.Uploaders.MDII, :files])
-
-    {:ok, file_data} = File.read(upload.tempfile)
-
-    extension = String.split(upload.name, ".") |> List.last()
-    query = "#{cgi}?#{extension}"
-
-    with {:ok, %{status: 200, body: body}} <-
-           HTTP.post(query, file_data, [], adapter: [pool: :default]) do
-      remote_file_name = String.split(body) |> List.first()
-      public_url = "#{files}/#{remote_file_name}.#{extension}"
-      {:ok, {:url, public_url}}
-    else
-      _ -> Pleroma.Uploaders.Local.put_file(upload)
-    end
-  end
-end

lib/pleroma/user.ex

@@ -1430,9 +1430,36 @@ def get_or_fetch_by_ap_id(ap_id) do
   Creates an internal service actor by URI if missing.
   Optionally takes nickname for addressing.
   """
-  def get_or_create_service_actor_by_ap_id(uri, nickname \\ nil) do
+  @spec get_or_create_service_actor_by_ap_id(String.t(), String.t()) :: User.t() | nil
-    with user when is_nil(user) <- get_cached_by_ap_id(uri) do
+  def get_or_create_service_actor_by_ap_id(uri, nickname) do
-      {:ok, user} =
+    {_, user} =
+      case get_cached_by_ap_id(uri) do
+        nil ->
+          with {:error, %{errors: errors}} <- create_service_actor(uri, nickname) do
+            Logger.error("Cannot create service actor: #{uri}/.\n#{inspect(errors)}")
+            {:error, nil}
+          end
+
+        %User{invisible: false} = user ->
+          set_invisible(user)
+
+        user ->
+          {:ok, user}
+      end
+
+    user
+  end
+
+  @spec set_invisible(User.t()) :: {:ok, User.t()}
+  defp set_invisible(user) do
+    user
+    |> change(%{invisible: true})
+    |> update_and_set_cache()
+  end
+
+  @spec create_service_actor(String.t(), String.t()) ::
+          {:ok, User.t()} | {:error, Ecto.Changeset.t()}
+  defp create_service_actor(uri, nickname) do
     %User{
       invisible: true,
       local: true,
@@ -1440,10 +1467,10 @@ def get_or_create_service_actor_by_ap_id(uri, nickname \\ nil) do
       nickname: nickname,
       follower_address: uri <> "/followers"
     }
+    |> change
+    |> unique_constraint(:nickname)
     |> Repo.insert()
-
+    |> set_cache()
-      user
-    end
   end
 
   # AP style
@@ -1855,9 +1882,9 @@ def admin_api_update(user, params) do
       ])
 
     with {:ok, updated_user} <- update_and_set_cache(changeset) do
-      if user.is_admin && !updated_user.is_admin do
+      if user.is_admin != updated_user.is_admin do
-        # Tokens & authorizations containing any admin scopes must be revoked (revoking all).
+        # Admin status change results in change of accessible OAuth scopes, and instead of changing
-        # This is an extra safety measure (tokens' admin scopes won't be accepted for non-admins).
+        #   already issued tokens we revoke them, requiring user to sign in again
         global_sign_out(user)
       end
 

lib/pleroma/utils.ex

@@ -0,0 +1,12 @@
+# Pleroma: A lightweight social networking server
+# Copyright © 2017-2019 Pleroma Authors <https://pleroma.social/>
+# SPDX-License-Identifier: AGPL-3.0-only
+
+defmodule Pleroma.Utils do
+  def compile_dir(dir) when is_binary(dir) do
+    dir
+    |> File.ls!()
+    |> Enum.map(&Path.join(dir, &1))
+    |> Kernel.ParallelCompiler.compile()
+  end
+end

lib/pleroma/web/activity_pub/activity_pub.ex

@@ -1298,27 +1298,25 @@ defp object_to_user_data(data) do
   def fetch_follow_information_for_user(user) do
     with {:ok, following_data} <-
            Fetcher.fetch_and_contain_remote_object_from_id(user.following_address),
-         following_count when is_integer(following_count) <- following_data["totalItems"],
          {:ok, hide_follows} <- collection_private(following_data),
          {:ok, followers_data} <-
            Fetcher.fetch_and_contain_remote_object_from_id(user.follower_address),
-         followers_count when is_integer(followers_count) <- followers_data["totalItems"],
          {:ok, hide_followers} <- collection_private(followers_data) do
       {:ok,
        %{
          hide_follows: hide_follows,
-         follower_count: followers_count,
+         follower_count: normalize_counter(followers_data["totalItems"]),
-         following_count: following_count,
+         following_count: normalize_counter(following_data["totalItems"]),
          hide_followers: hide_followers
        }}
     else
-      {:error, _} = e ->
+      {:error, _} = e -> e
-        e
+      e -> {:error, e}
+    end
+  end
 
-      e ->
+  defp normalize_counter(counter) when is_integer(counter), do: counter
-        {:error, e}
+  defp normalize_counter(_), do: 0
-    end
-  end
 
   defp maybe_update_follow_information(data) do
     with {:enabled, true} <-
@@ -1339,24 +1337,18 @@ defp maybe_update_follow_information(data) do
     end
   end
 
+  defp collection_private(%{"first" => %{"type" => type}})
+       when type in ["CollectionPage", "OrderedCollectionPage"],
+       do: {:ok, false}
+
   defp collection_private(%{"first" => first}) do
-    if is_map(first) and
-         first["type"] in ["CollectionPage", "OrderedCollectionPage"] do
-      {:ok, false}
-    else
     with {:ok, %{"type" => type}} when type in ["CollectionPage", "OrderedCollectionPage"] <-
            Fetcher.fetch_and_contain_remote_object_from_id(first) do
       {:ok, false}
     else
-        {:error, {:ok, %{status: code}}} when code in [401, 403] ->
+      {:error, {:ok, %{status: code}}} when code in [401, 403] -> {:ok, true}
-          {:ok, true}
+      {:error, _} = e -> e
-
+      e -> {:error, e}
-        {:error, _} = e ->
-          e
-
-        e ->
-          {:error, e}
-      end
     end
   end
 

lib/pleroma/web/activity_pub/activity_pub_controller.ex

@@ -257,7 +257,7 @@ def inbox(%{assigns: %{valid_signature: true}} = conn, params) do
 
   # only accept relayed Creates
   def inbox(conn, %{"type" => "Create"} = params) do
-    Logger.info(
+    Logger.debug(
       "Signature missing or not from author, relayed Create message, fetching object from source"
     )
 
@@ -270,11 +270,11 @@ def inbox(conn, params) do
     headers = Enum.into(conn.req_headers, %{})
 
     if String.contains?(headers["signature"], params["actor"]) do
-      Logger.info(
+      Logger.debug(
         "Signature validation error for: #{params["actor"]}, make sure you are forwarding the HTTP Host header!"
       )
 
-      Logger.info(inspect(conn.req_headers))
+      Logger.debug(inspect(conn.req_headers))
     end
 
     json(conn, dgettext("errors", "error"))

lib/pleroma/web/activity_pub/mrf/drop_policy.ex

@@ -9,7 +9,7 @@ defmodule Pleroma.Web.ActivityPub.MRF.DropPolicy do
 
   @impl true
   def filter(object) do
-    Logger.info("REJECTING #{inspect(object)}")
+    Logger.debug("REJECTING #{inspect(object)}")
     {:reject, object}
   end
 

lib/pleroma/web/activity_pub/mrf/mediaproxy_warming_policy.ex

@@ -18,7 +18,7 @@ defmodule Pleroma.Web.ActivityPub.MRF.MediaProxyWarmingPolicy do
   ]
 
   def perform(:prefetch, url) do
-    Logger.info("Prefetching #{inspect(url)}")
+    Logger.debug("Prefetching #{inspect(url)}")
 
     url
     |> MediaProxy.url()

lib/pleroma/web/activity_pub/publisher.ex

@@ -48,7 +48,7 @@ def is_representable?(%Activity{} = activity) do
   * `id`: the ActivityStreams URI of the message
   """
   def publish_one(%{inbox: inbox, json: json, actor: %User{} = actor, id: id} = params) do
-    Logger.info("Federating #{id} to #{inbox}")
+    Logger.debug("Federating #{id} to #{inbox}")
     %{host: host, path: path} = URI.parse(inbox)
 
     digest = "SHA-256=" <> (:crypto.hash(:sha256, json) |> Base.encode64())
@@ -228,7 +228,7 @@ def publish(%User{} = actor, %Activity{} = activity) do
     public = is_public?(activity)
 
     if public && Config.get([:instance, :allow_relay]) do
-      Logger.info(fn -> "Relaying #{activity.data["id"]} out" end)
+      Logger.debug(fn -> "Relaying #{activity.data["id"]} out" end)
       Relay.publish(activity)
     end
 

lib/pleroma/web/activity_pub/relay.ex

@@ -9,10 +9,12 @@ defmodule Pleroma.Web.ActivityPub.Relay do
   alias Pleroma.Web.ActivityPub.ActivityPub
   require Logger
 
+  @relay_nickname "relay"
+
   def get_actor do
     actor =
       relay_ap_id()
-      |> User.get_or_create_service_actor_by_ap_id()
+      |> User.get_or_create_service_actor_by_ap_id(@relay_nickname)
 
     actor
   end

lib/pleroma/web/endpoint.ex

@@ -59,7 +59,7 @@ defmodule Pleroma.Web.Endpoint do
 
   plug(Pleroma.Plugs.TrailingFormatPlug)
   plug(Plug.RequestId)
-  plug(Plug.Logger)
+  plug(Plug.Logger, log: :debug)
 
   plug(Pleroma.Plugs.Parsers)
 

lib/pleroma/web/federator/federator.ex

@@ -58,7 +58,7 @@ def perform(:publish, activity) do
   end
 
   def perform(:incoming_ap_doc, params) do
-    Logger.info("Handling incoming AP activity")
+    Logger.debug("Handling incoming AP activity")
 
     params = Utils.normalize_params(params)
 
@@ -71,13 +71,13 @@ def perform(:incoming_ap_doc, params) do
       {:ok, activity}
     else
       %Activity{} ->
-        Logger.info("Already had #{params["id"]}")
+        Logger.debug("Already had #{params["id"]}")
         :error
 
       _e ->
         # Just drop those for now
-        Logger.info("Unhandled activity")
+        Logger.debug("Unhandled activity")
-        Logger.info(Jason.encode!(params, pretty: true))
+        Logger.debug(Jason.encode!(params, pretty: true))
         :error
     end
   end

lib/pleroma/web/federator/publisher.ex

@@ -47,7 +47,7 @@ def publish(%User{} = user, %Activity{} = activity) do
     Config.get([:instance, :federation_publisher_modules])
     |> Enum.each(fn module ->
       if module.is_representable?(activity) do
-        Logger.info("Publishing #{activity.data["id"]} using #{inspect(module)}")
+        Logger.debug("Publishing #{activity.data["id"]} using #{inspect(module)}")
         module.publish(user, activity)
       end
     end)

lib/pleroma/web/masto_fe_controller.ex

@@ -20,19 +20,22 @@ defmodule Pleroma.Web.MastoFEController do
   plug(Pleroma.Plugs.EnsurePublicOrAuthenticatedPlug when action != :index)
 
   @doc "GET /web/*path"
-  def index(%{assigns: %{user: user}} = conn, _params) do
+  def index(%{assigns: %{user: user, token: token}} = conn, _params)
-    token = get_session(conn, :oauth_token)
+      when not is_nil(user) and not is_nil(token) do
-
-    if user && token do
     conn
     |> put_layout(false)
-      |> render("index.html", token: token, user: user, custom_emojis: Pleroma.Emoji.get_all())
+    |> render("index.html",
-    else
+      token: token.token,
+      user: user,
+      custom_emojis: Pleroma.Emoji.get_all()
+    )
+  end
+
+  def index(conn, _params) do
     conn
     |> put_session(:return_to, conn.request_path)
     |> redirect(to: "/web/login")
   end
-  end
 
   @doc "GET /web/manifest.json"
   def manifest(conn, _params) do

lib/pleroma/web/metadata/twitter_card.ex

@@ -31,7 +31,7 @@ def build_tags(%{activity_id: id, object: object, user: user}) do
       if attachments == [] or Metadata.activity_nsfw?(object) do
         [
           image_tag(user),
-          {:meta, [property: "twitter:card", content: "summary_large_image"], []}
+          {:meta, [property: "twitter:card", content: "summary"], []}
         ]
       else
         attachments

lib/pleroma/web/pleroma_api/controllers/emoji_api_controller.ex

@@ -52,7 +52,7 @@ def list_from(conn, %{"instance_address" => address}) do
   @doc """
   Lists the packs available on the instance as JSON.
 
-  The information is public and does not require authentification. The format is
+  The information is public and does not require authentication. The format is
   a map of "pack directory name" to pack.json contents.
   """
   def list_packs(conn, _params) do

lib/pleroma/web/pleroma_api/controllers/pleroma_api_controller.ex

@@ -22,7 +22,14 @@ defmodule Pleroma.Web.PleromaAPI.PleromaAPIController do
 
   plug(
     OAuthScopesPlug,
-    %{scopes: ["read:statuses"]} when action in [:conversation, :conversation_statuses]
+    %{scopes: ["read:statuses"]}
+    when action in [:conversation, :conversation_statuses, :emoji_reactions_by]
+  )
+
+  plug(
+    OAuthScopesPlug,
+    %{scopes: ["write:statuses"]}
+    when action in [:react_with_emoji, :unreact_with_emoji]
   )
 
   plug(

lib/pleroma/web/twitter_api/controllers/util_controller.ex

@@ -20,7 +20,14 @@ defmodule Pleroma.Web.TwitterAPI.UtilController do
   plug(
     OAuthScopesPlug,
     %{scopes: ["follow", "write:follows"]}
-    when action in [:do_remote_follow, :follow_import]
+    when action == :follow_import
+  )
+
+  # Note: follower can submit the form (with password auth) not being signed in (having no token)
+  plug(
+    OAuthScopesPlug,
+    %{fallback: :proceed_unauthenticated, scopes: ["follow", "write:follows"]}
+    when action == :do_remote_follow
   )
 
   plug(OAuthScopesPlug, %{scopes: ["follow", "write:blocks"]} when action == :blocks_import)
@@ -255,7 +262,9 @@ def change_email(%{assigns: %{user: user}} = conn, params) do
   end
 
   def delete_account(%{assigns: %{user: user}} = conn, params) do
-    case CommonAPI.Utils.confirm_current_password(user, params["password"]) do
+    password = params["password"] || ""
+
+    case CommonAPI.Utils.confirm_current_password(user, password) do
       {:ok, user} ->
         User.delete(user)
         json(conn, %{status: "success"})

mix.exs

@@ -165,7 +165,7 @@ defp deps do
        ref: "825dc00aaba5a1b7c4202a532b696b595dd3bcb3"},
       {:captcha,
        git: "https://git.pleroma.social/pleroma/elixir-libraries/elixir-captcha.git",
-       ref: "c3c795c55f6b49d79d6ac70a0f91e525099fc3e2"},
+       ref: "e0f16822d578866e186a0974d65ad58cddc1e2ab"},
       {:mox, "~> 0.5", only: :test}
     ] ++ oauth_deps()
   end

mix.lock

@@ -8,7 +8,7 @@
   "bunt": {:hex, :bunt, "0.2.0", "951c6e801e8b1d2cbe58ebbd3e616a869061ddadcc4863d0a2182541acae9a38", [:mix], [], "hexpm"},
   "cachex": {:hex, :cachex, "3.0.3", "4e2d3e05814a5738f5ff3903151d5c25636d72a3527251b753f501ad9c657967", [:mix], [{:eternal, "~> 1.2", [hex: :eternal, repo: "hexpm", optional: false]}, {:unsafe, "~> 1.0", [hex: :unsafe, repo: "hexpm", optional: false]}], "hexpm"},
   "calendar": {:hex, :calendar, "0.17.6", "ec291cb2e4ba499c2e8c0ef5f4ace974e2f9d02ae9e807e711a9b0c7850b9aee", [:mix], [{:tzdata, "~> 0.5.20 or ~> 0.1.201603 or ~> 1.0", [hex: :tzdata, repo: "hexpm", optional: false]}], "hexpm"},
-  "captcha": {:git, "https://git.pleroma.social/pleroma/elixir-libraries/elixir-captcha.git", "c3c795c55f6b49d79d6ac70a0f91e525099fc3e2", [ref: "c3c795c55f6b49d79d6ac70a0f91e525099fc3e2"]},
+  "captcha": {:git, "https://git.pleroma.social/pleroma/elixir-libraries/elixir-captcha.git", "e0f16822d578866e186a0974d65ad58cddc1e2ab", [ref: "e0f16822d578866e186a0974d65ad58cddc1e2ab"]},
   "certifi": {:hex, :certifi, "2.5.1", "867ce347f7c7d78563450a18a6a28a8090331e77fa02380b4a21962a65d36ee5", [:rebar3], [{:parse_trans, "~>3.3", [hex: :parse_trans, repo: "hexpm", optional: false]}], "hexpm"},
   "combine": {:hex, :combine, "0.10.0", "eff8224eeb56498a2af13011d142c5e7997a80c8f5b97c499f84c841032e429f", [:mix], [], "hexpm"},
   "comeonin": {:hex, :comeonin, "4.1.2", "3eb5620fd8e35508991664b4c2b04dd41e52f1620b36957be837c1d7784b7592", [:mix], [{:argon2_elixir, "~> 1.2", [hex: :argon2_elixir, repo: "hexpm", optional: true]}, {:bcrypt_elixir, "~> 0.12.1 or ~> 1.0", [hex: :bcrypt_elixir, repo: "hexpm", optional: true]}, {:pbkdf2_elixir, "~> 0.12", [hex: :pbkdf2_elixir, repo: "hexpm", optional: true]}], "hexpm"},

priv/static/adminfe/index.html

@@ -1 +1 @@
-<!DOCTYPE html><html><head><meta charset=utf-8><meta http-equiv=X-UA-Compatible content="IE=edge,chrome=1"><meta name=renderer content=webkit><meta name=viewport content="width=device-width,initial-scale=1,maximum-scale=1,user-scalable=no"><title>Admin FE</title><link rel="shortcut icon" href=favicon.ico><link href=chunk-elementUI.a842fb0a.css rel=stylesheet><link href=chunk-libs.57fe98a3.css rel=stylesheet><link href=app.8589ec81.css rel=stylesheet></head><body><script src=/pleroma/admin/static/tinymce4.7.5/tinymce.min.js></script><div id=app></div><script type=text/javascript src=static/js/runtime.46db235c.js></script><script type=text/javascript src=static/js/chunk-elementUI.fa319e7b.js></script><script type=text/javascript src=static/js/chunk-libs.35c18287.js></script><script type=text/javascript src=static/js/app.9c4316f1.js></script></body></html>
+<!DOCTYPE html><html><head><meta charset=utf-8><meta http-equiv=X-UA-Compatible content="IE=edge,chrome=1"><meta name=renderer content=webkit><meta name=viewport content="width=device-width,initial-scale=1,maximum-scale=1,user-scalable=no"><title>Admin FE</title><link rel="shortcut icon" href=favicon.ico><link href=chunk-elementUI.a842fb0a.css rel=stylesheet><link href=chunk-libs.57fe98a3.css rel=stylesheet><link href=app.fdd73ce4.css rel=stylesheet></head><body><div id=app></div><script type=text/javascript src=static/js/runtime.d6d1aaab.js></script><script type=text/javascript src=static/js/chunk-elementUI.fa319e7b.js></script><script type=text/javascript src=static/js/chunk-libs.35c18287.js></script><script type=text/javascript src=static/js/app.19b7049e.js></script></body></html>