2007-01-25 06:40:21 +00:00
/* doc/example.conf - brief example configuration file
*
* Copyright (C) 2000-2002 Hybrid Development Team
* Copyright (C) 2002-2005 ircd-ratbox development team
* Copyright (C) 2005-2006 charybdis development team
*
2007-02-01 01:44:31 +00:00
* $Id: example.conf 3195 2007-02-01 01:44:31Z jilles $
2007-01-25 06:40:21 +00:00
*
* See reference.conf for more information.
*/
/* Extensions */
#loadmodule "extensions/createauthonly.so";
#loadmodule "extensions/extb_account.so";
#loadmodule "extensions/extb_canjoin.so";
#loadmodule "extensions/extb_channel.so";
#loadmodule "extensions/extb_extgecos.so";
#loadmodule "extensions/extb_oper.so";
#loadmodule "extensions/extb_realname.so";
#loadmodule "extensions/extb_server.so";
#loadmodule "extensions/hurt.so";
#loadmodule "extensions/ip_cloaking.so";
#loadmodule "extensions/m_findforwards.so";
#loadmodule "extensions/m_identify.so";
#loadmodule "extensions/no_oper_invis.so";
#loadmodule "extensions/sno_farconnect.so";
#loadmodule "extensions/sno_globalkline.so";
#loadmodule "extensions/sno_globaloper.so";
serverinfo {
name = "hades.arpa";
use_ts6 = yes;
sid = "42X";
description = "charybdis test server";
network_name = "AthemeNET";
network_desc = "Your IRC network.";
hub = yes;
/* On multi-homed hosts you may need the following. These define
* the addresses we connect from to other servers. */
/* for IPv4 */
#vhost = "192.169.0.1";
/* for IPv6 */
#vhost6 = "3ffe:80e8:546::2";
};
admin {
name = "Lazy admin (lazya)";
description = "AthemeNET client server";
email = "nobody@127.0.0.1";
};
log {
fname_userlog = "logs/userlog";
#fname_fuserlog = "logs/fuserlog";
fname_operlog = "logs/operlog";
#fname_foperlog = "logs/foperlog";
fname_serverlog = "logs/serverlog";
fname_glinelog = "logs/glinelog";
#fname_klinelog = "logs/klinelog";
fname_killlog = "logs/killlog";
fname_operspylog = "logs/operspylog";
#fname_ioerrorlog = "logs/ioerror";
};
/* class {} blocks MUST be specified before anything that uses them. That
* means they must be defined before auth {} and before connect {}.
*/
class "users" {
ping_time = 2 minutes;
number_per_ident = 10;
number_per_ip = 10;
number_per_ip_global = 50;
cidr_bitlen = 64;
number_per_cidr = 8;
max_number = 3000;
sendq = 400 kbytes;
};
class "opers" {
ping_time = 5 minutes;
number_per_ip = 10;
max_number = 1000;
sendq = 1 megabyte;
};
class "server" {
ping_time = 5 minutes;
connectfreq = 5 minutes;
max_number = 1;
sendq = 4 megabytes;
};
listen {
/* If you want to listen on a specific IP only, specify host.
* host definitions apply only to the following port line.
*/
#host = "192.169.0.1";
port = 5000, 6665 .. 6669;
/* Listen on IPv6 (if you used host= above). */
#host = "3ffe:1234:a:b:c::d";
#port = 5000, 6665 .. 6669;
};
/* auth {}: allow users to connect to the ircd (OLD I:)
* auth {} blocks MUST be specified in order of precedence. The first one
* that matches a user will be used. So place spoofs first, then specials,
* then general access, then restricted.
*/
auth {
/* user: the user@host allowed to connect. multiple IPv4/IPv6 user
* lines are permitted per auth block.
*/
user = "*@172.16.0.0/12";
user = "*test@123D:B567:*";
/* password: an optional password that is required to use this block.
* By default this is not encrypted, specify the flag "encrypted" in
* flags = ...; below if it is.
*/
password = "letmein";
/* spoof: fake the users user@host to be be this. You may either
* specify a host or a user@host to spoof to. This is free-form,
* just do everyone a favour and dont abuse it. (OLD I: = flag)
*/
spoof = "I.still.hate.packets";
/* Possible flags in auth:
*
* encrypted | password is encrypted with mkpasswd
* spoof_notice | give a notice when spoofing hosts
* exceed_limit (old > flag) | allow user to exceed class user limits
* kline_exempt (old ^ flag) | exempt this user from k/g/xlines&dnsbls
* dnsbl_exempt | exempt this user from dnsbls
* gline_exempt (old _ flag) | exempt this user from glines
* spambot_exempt | exempt this user from spambot checks
* shide_exempt | exempt this user from serverhiding
* jupe_exempt | exempt this user from generating
* warnings joining juped channels
* resv_exempt | exempt this user from resvs
* flood_exempt | exempt this user from flood limits
* USE WITH CAUTION.
* no_tilde (old - flag) | don't prefix ~ to username if no ident
* need_ident (old + flag) | require ident for user in this class
* need_sasl | require SASL id for user in this class
*/
flags = kline_exempt, exceed_limit;
/* class: the class the user is placed in */
class = "opers";
};
auth {
user = "*@*";
class = "users";
};
operator "god" {
/* name: the name of the oper must go above */
/* user: the user@host required for this operator. CIDR *is*
* supported now. auth{} spoofs work here, other spoofs do not.
* multiple user="" lines are supported.
*/
user = "*god@127.0.0.1";
/* password: the password required to oper. Unless ~encrypted is
* contained in flags = ...; this will need to be encrypted using
* mkpasswd, MD5 is supported
*/
password = "etcnjl8juSU1E";
/* rsa key: the public key for this oper when using Challenge.
* A password should not be defined when this is used, see
* doc/challenge.txt for more information.
*/
#rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
/* umodes: the specific umodes this oper gets when they oper.
* If this is specified an oper will not be given oper_umodes
* These are described above oper_only_umodes in general {};
*/
#umodes = locops, servnotice, operwall, wallop;
/* snomask: specific server notice mask on oper up.
* If this is specified an oper will not be given oper_snomask.
*/
snomask = "+Zbfkrsuy";
/* privileges: controls the activities and commands an oper is
* allowed to do on the server. You may prefix an option with ~ to
* disable it, ie ~operwall
*
* Default flags are operwall, remoteban and encrypted.
*
* Available options:
*
* encrypted: the password above is encrypted [DEFAULT]
* local_kill: allows local users to be /KILL'd
* global_kill: allows local and remote users to be
* /KILL'd (OLD 'O' flag)
* remote: allows remote SQUIT and CONNECT (OLD 'R' flag)
* kline: allows KILL, KLINE and DLINE (OLD 'K' flag)
* unkline: allows UNKLINE and UNDLINE (OLD 'U' flag)
* gline: allows GLINE (OLD 'G' flag)
* nick_changes: allows oper to see nickchanges (OLD 'N' flag)
* via usermode +n
* rehash: allows oper to REHASH config (OLD 'H' flag)
* die: allows DIE and RESTART (OLD 'D' flag)
* admin: gives admin privileges. admins
* may (un)load modules and see the
* real IPs of servers.
* hidden_admin: gives admin privileges except
* will not have the admin lines in
* stats p and whois.
* xline: allows use of /quote xline/unxline
* operwall: allows the oper to send operwalls [DEFAULT]
* oper_spy: allows 'operspy' features to see through +s
* channels etc. see /quote help operspy
* hidden_oper: hides the oper from /stats p (OLD UMODE +p)
* remoteban: allows remote kline etc [DEFAULT]
*/
flags = global_kill, remote, kline, unkline, gline,
die, rehash, admin, xline, operwall;
};
connect "irc.uplink.com" {
host = "192.168.0.1";
send_password = "password";
accept_password = "anotherpassword";
port = 6666;
hub_mask = "*";
class = "server";
flags = compressed, topicburst;
/* If the connection is IPv6, uncomment below */
#aftype = ipv6;
};
service {
name = "services.int";
};
cluster {
name = "*";
flags = kline, tkline, unkline, xline, txline, unxline, resv, tresv, unresv;
};
shared {
oper = "*@*", "*";
flags = all, rehash;
};
/* exempt {}: IPs that are exempt from Dlines. (OLD d:) */
exempt {
ip = "127.0.0.1";
};
channel {
use_invex = yes;
use_except = yes;
use_knock = yes;
use_forward = yes;
invite_ops_only = yes;
knock_delay = 5 minutes;
knock_delay_channel = 1 minute;
max_chans_per_user = 15;
max_bans = 100;
max_bans_large = 500;
default_split_user_count = 0;
default_split_server_count = 0;
no_create_on_split = no;
no_join_on_split = no;
burst_topicwho = yes;
kick_on_split_riding = no;
};
serverhide {
flatten_links = yes;
links_delay = 5 minutes;
hidden = no;
disable_hidden = no;
};
/* These are the blacklist settings.
* You can have multiple combinations of host and rejection reasons.
2007-01-25 07:08:21 +00:00
* They are used in pairs of one host/rejection reason, or multiple hosts/rejection reason.
2007-01-25 06:40:21 +00:00
*
* These settings should be adequate for most networks, and are (presently)
* required for use on AthemeNet.
*
* Word to the wise: Do not use blacklists like SPEWS for blocking IRC
* connections.
*
2007-02-01 01:44:31 +00:00
* As of charybdis 2.1.3, you can do some keyword substitution on the rejection
2007-01-25 07:08:21 +00:00
* reason. The available keyword substitutions are:
*
* ${ip} - the user's IP
* ${host} - the user's canonical hostname
* ${dnsbl-host} - the dnsbl hostname the lookup was done against
* ${nick} - the user's nickname
* ${network-name} - the name of the network
*
2007-01-25 06:40:21 +00:00
* Note: AHBL (the providers of the below BLs) request that they be
* contacted, via email, at admins@2mbit.com before using these BLs.
* See <http://www.ahbl.org/services.php> for more information.
*/
#blacklist {
# host = "ircbl.ahbl.org";
2007-01-25 07:08:21 +00:00
# reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for having an open proxy. In order to protect ${network-name} from abuse, we are not allowing connections with open proxies to connect.";
2007-01-25 06:40:21 +00:00
#
# host = "tor.ahbl.org";
2007-01-25 07:08:21 +00:00
# reject_reason = "${nick}, your IP (${ip}) is listed as a TOR exit node. In order to protect ${network-name} from tor-based abuse, we are not allowing TOR exit nodes to connect to our network.";
2007-01-25 06:40:21 +00:00
#};
alias "NickServ" {
target = "NickServ";
};
alias "ChanServ" {
target = "ChanServ";
};
alias "OperServ" {
target = "OperServ";
};
alias "MemoServ" {
target = "MemoServ";
};
alias "NS" {
target = "NickServ";
};
alias "CS" {
target = "ChanServ";
};
alias "OS" {
target = "OperServ";
};
alias "MS" {
target = "MemoServ";
};
general {
hide_error_messages = opers;
hide_spoof_ips = yes;
/*
* default_umodes: umodes to enable on connect.
* If you have enabled the ip_cloaking module, and you want
* to make use of it, add +h to this option, i.e.:
* default_umodes = "+ih";
*/
default_umodes = "+i";
default_operstring = "is an IRC Operator";
default_adminstring = "is a Server Administrator";
servicestring = "is a Network Service";
disable_fake_channels = no;
tkline_expire_notices = no;
default_floodcount = 10;
failed_oper_notice = yes;
dots_in_ident=2;
dot_in_ip6_addr = no;
min_nonwildcard = 4;
min_nonwildcard_simple = 3;
max_accept = 100;
max_monitor = 100;
anti_nick_flood = yes;
max_nick_time = 20 seconds;
max_nick_changes = 5;
anti_spam_exit_message_time = 5 minutes;
ts_warn_delta = 30 seconds;
ts_max_delta = 5 minutes;
client_exit = yes;
collision_fnc = yes;
global_snotices = yes;
dline_with_reason = yes;
kline_delay = 0 seconds;
kline_with_reason = yes;
kline_reason = "K-Lined";
identify_service = "NickServ@services.int";
identify_command = "IDENTIFY";
non_redundant_klines = yes;
warn_no_nline = yes;
stats_e_disabled = no;
stats_c_oper_only=no;
stats_h_oper_only=no;
stats_y_oper_only=no;
stats_o_oper_only=yes;
stats_P_oper_only=no;
stats_i_oper_only=masked;
stats_k_oper_only=masked;
map_oper_only = no;
operspy_admin_only = no;
operspy_dont_care_user_info = no;
caller_id_wait = 1 minute;
pace_wait_simple = 1 second;
pace_wait = 10 seconds;
short_motd = no;
ping_cookie = no;
connect_timeout = 30 seconds;
disable_auth = no;
no_oper_flood = yes;
glines = no;
gline_time = 1 day;
gline_min_cidr = 16;
idletime = 0;
max_targets = 4;
client_flood = 20;
use_whois_actually = no;
oper_only_umodes = operwall, locops, servnotice;
oper_umodes = locops, servnotice, operwall, wallop;
oper_snomask = "+s";
burst_away = yes;
nick_delay = 0 seconds; # 15 minutes if you want to enable this
reject_ban_time = 1 minute;
reject_after_count = 3;
reject_duration = 5 minutes;
};
modules {
path = "modules";
path = "modules/autoload";
};
