elemental-ircd/libratbox/Makefile.in

872 lines
27 KiB
Makefile
Raw Normal View History

2014-06-09 23:10:15 +00:00
# Makefile.in generated by automake 1.14.1 from Makefile.am.
# @configure_input@
2014-06-09 23:10:15 +00:00
# Copyright (C) 1994-2013 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
2008-12-22 09:50:23 +00:00
VPATH = @srcdir@
2014-06-09 23:10:15 +00:00
am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
2010-01-07 22:51:32 +00:00
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = .
2014-06-09 23:10:15 +00:00
DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
$(top_srcdir)/configure $(am__configure_deps) \
$(top_srcdir)/include/libratbox_config.h.in \
$(srcdir)/libratbox.pc.in COPYING ChangeLog INSTALL README \
TODO compile config.guess config.sub depcomp install-sh \
missing ltmain.sh
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/include/libratbox_config.h
2008-12-22 09:50:23 +00:00
CONFIG_CLEAN_FILES = libratbox.pc
2010-01-07 22:51:32 +00:00
CONFIG_CLEAN_VPATH_FILES =
2014-06-09 23:10:15 +00:00
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
2014-06-09 23:10:15 +00:00
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
2008-12-22 09:50:23 +00:00
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
2010-01-07 22:51:32 +00:00
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
2014-06-09 23:10:15 +00:00
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
2008-12-22 09:50:23 +00:00
am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
DATA = $(pkgconfig_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
2014-06-09 23:10:15 +00:00
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
cscope distdir dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
2014-06-09 23:10:15 +00:00
CSCOPE = cscope
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
2014-06-09 23:10:15 +00:00
if test -d "$(distdir)"; then \
find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -rf "$(distdir)" \
|| { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi
am__post_remove_distdir = $(am__remove_distdir)
2010-01-07 22:51:32 +00:00
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
2014-06-09 23:10:15 +00:00
DIST_TARGETS = dist-gzip
distuninstallcheck_listfiles = find . -type f -print
2014-06-09 23:10:15 +00:00
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
AMTAR = @AMTAR@
2014-06-09 23:10:15 +00:00
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CP = @CP@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
2008-04-01 16:53:46 +00:00
DSYMUTIL = @DSYMUTIL@
2010-01-07 22:51:32 +00:00
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
2010-01-07 22:51:32 +00:00
FGREP = @FGREP@
2008-06-10 18:45:43 +00:00
GNUTLS_CFLAGS = @GNUTLS_CFLAGS@
GNUTLS_LIBS = @GNUTLS_LIBS@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
2010-01-07 22:51:32 +00:00
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
2010-01-07 22:51:32 +00:00
LIPO = @LIPO@
LN = @LN@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
MV = @MV@
2010-01-07 22:51:32 +00:00
NM = @NM@
2008-04-01 16:53:46 +00:00
NMEDIT = @NMEDIT@
2010-01-07 22:51:32 +00:00
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
2010-01-07 22:51:32 +00:00
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
2010-01-07 22:51:32 +00:00
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PICFLAGS = @PICFLAGS@
2008-06-10 18:45:43 +00:00
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
RANLIB = @RANLIB@
RB_PREFIX = @RB_PREFIX@
RM = @RM@
SED = @SED@
SEDOBJ = @SEDOBJ@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SSL_CFLAGS = @SSL_CFLAGS@
SSL_LIBS = @SSL_LIBS@
STRIP = @STRIP@
TOUCH = @TOUCH@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
2010-01-07 22:51:32 +00:00
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
2008-12-22 09:49:01 +00:00
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AUTOMAKE_OPTIONS = foreign
SUBDIRS = src
2008-12-22 09:50:23 +00:00
pkgconfigdir = $(libdir)/pkgconfig
pkgconfig_DATA = libratbox.pc
all: all-recursive
.SUFFIXES:
2014-06-09 23:10:15 +00:00
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
2010-01-07 22:51:32 +00:00
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
2010-01-07 22:51:32 +00:00
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
2010-01-07 22:51:32 +00:00
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
2010-01-07 22:51:32 +00:00
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
include/libratbox_config.h: include/stamp-h1
2014-06-09 23:10:15 +00:00
@test -f $@ || rm -f include/stamp-h1
@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) include/stamp-h1
include/stamp-h1: $(top_srcdir)/include/libratbox_config.h.in $(top_builddir)/config.status
@rm -f include/stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status include/libratbox_config.h
$(top_srcdir)/include/libratbox_config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
2010-01-07 22:51:32 +00:00
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f include/stamp-h1
touch $@
distclean-hdr:
-rm -f include/libratbox_config.h include/stamp-h1
2008-12-22 09:50:23 +00:00
libratbox.pc: $(top_builddir)/config.status $(srcdir)/libratbox.pc.in
cd $(top_builddir) && $(SHELL) ./config.status $@
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
2008-12-22 09:49:01 +00:00
-rm -f libtool config.lt
2008-12-22 09:50:23 +00:00
install-pkgconfigDATA: $(pkgconfig_DATA)
@$(NORMAL_INSTALL)
2010-01-07 22:51:32 +00:00
@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
2014-06-09 23:10:15 +00:00
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
fi; \
2010-01-07 22:51:32 +00:00
for p in $$list; do \
2008-12-22 09:50:23 +00:00
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
2010-01-07 22:51:32 +00:00
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
2008-12-22 09:50:23 +00:00
done
uninstall-pkgconfigDATA:
@$(NORMAL_UNINSTALL)
2010-01-07 22:51:32 +00:00
@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
2014-06-09 23:10:15 +00:00
dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
# This directory's subdirectories are mostly independent; you can cd
2014-06-09 23:10:15 +00:00
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
2014-06-09 23:10:15 +00:00
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
2010-01-07 22:51:32 +00:00
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
2014-06-09 23:10:15 +00:00
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
2014-06-09 23:10:15 +00:00
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
2010-01-07 22:51:32 +00:00
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
2010-01-07 22:51:32 +00:00
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
2014-06-09 23:10:15 +00:00
$(am__define_uniq_tagged_files); \
2010-01-07 22:51:32 +00:00
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
2010-01-07 22:51:32 +00:00
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
2014-06-09 23:10:15 +00:00
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
2010-01-07 22:51:32 +00:00
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
2010-01-07 22:51:32 +00:00
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
2010-01-07 22:51:32 +00:00
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
2014-06-09 23:10:15 +00:00
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
2014-06-09 23:10:15 +00:00
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(DISTFILES)
$(am__remove_distdir)
2010-01-07 22:51:32 +00:00
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
2010-01-07 22:51:32 +00:00
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
2010-01-07 22:51:32 +00:00
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
2010-01-07 22:51:32 +00:00
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
2010-01-07 22:51:32 +00:00
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
2010-01-07 22:51:32 +00:00
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
2014-06-09 23:10:15 +00:00
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
2010-01-07 22:51:32 +00:00
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
2010-01-07 22:51:32 +00:00
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
2010-01-07 22:51:32 +00:00
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
2010-01-07 22:51:32 +00:00
-test -n "$(am__skip_mode_fix)" \
2010-02-18 05:12:45 +00:00
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
2010-01-07 22:51:32 +00:00
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
2014-06-09 23:10:15 +00:00
$(am__post_remove_distdir)
dist-bzip2: distdir
2014-06-09 23:10:15 +00:00
tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
$(am__post_remove_distdir)
2014-06-09 23:10:15 +00:00
dist-lzip: distdir
tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__post_remove_distdir)
2008-04-01 16:53:46 +00:00
2010-01-07 22:51:32 +00:00
dist-xz: distdir
2014-06-09 23:10:15 +00:00
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__post_remove_distdir)
2010-01-07 22:51:32 +00:00
dist-tarZ: distdir
2014-06-09 23:10:15 +00:00
@echo WARNING: "Support for shar distribution archives is" \
"deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
2014-06-09 23:10:15 +00:00
$(am__post_remove_distdir)
dist-shar: distdir
2014-06-09 23:10:15 +00:00
@echo WARNING: "Support for distribution archives compressed with" \
"legacy program 'compress' is deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
2014-06-09 23:10:15 +00:00
$(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
2014-06-09 23:10:15 +00:00
$(am__post_remove_distdir)
2014-06-09 23:10:15 +00:00
dist dist-all:
$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
$(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
2010-02-18 05:12:45 +00:00
GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
2010-02-18 05:12:45 +00:00
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
2014-06-09 23:10:15 +00:00
*.tar.lz*) \
lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
2010-01-07 22:51:32 +00:00
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
2010-02-18 05:12:45 +00:00
GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
2014-06-09 23:10:15 +00:00
chmod -R a-w $(distdir)
chmod u+w $(distdir)
mkdir $(distdir)/_build $(distdir)/_inst
chmod a-w $(distdir)
2010-01-07 22:51:32 +00:00
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
2010-01-07 22:51:32 +00:00
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build \
2014-06-09 23:10:15 +00:00
&& ../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
2014-06-09 23:10:15 +00:00
--srcdir=.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
2010-01-07 22:51:32 +00:00
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
2014-06-09 23:10:15 +00:00
$(am__post_remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
2014-06-09 23:10:15 +00:00
@test -n '$(distuninstallcheck_dir)' || { \
echo 'ERROR: trying to run $@ with an empty' \
'$$(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
$(am__cd) '$(distuninstallcheck_dir)' || { \
echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
2008-12-22 09:50:23 +00:00
all-am: Makefile $(DATA)
installdirs: installdirs-recursive
installdirs-am:
2008-12-22 09:50:23 +00:00
for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
2014-06-09 23:10:15 +00:00
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
2010-01-07 22:51:32 +00:00
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr \
distclean-libtool distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
2010-01-07 22:51:32 +00:00
html-am:
info: info-recursive
info-am:
2008-12-22 09:50:23 +00:00
install-data-am: install-pkgconfigDATA
install-dvi: install-dvi-recursive
2010-01-07 22:51:32 +00:00
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
2010-01-07 22:51:32 +00:00
install-html-am:
install-info: install-info-recursive
2010-01-07 22:51:32 +00:00
install-info-am:
install-man:
install-pdf: install-pdf-recursive
2010-01-07 22:51:32 +00:00
install-pdf-am:
install-ps: install-ps-recursive
2010-01-07 22:51:32 +00:00
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
2008-12-22 09:50:23 +00:00
uninstall-am: uninstall-pkgconfigDATA
2014-06-09 23:10:15 +00:00
.MAKE: $(am__recursive_targets) install-am install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
am--refresh check check-am clean clean-cscope clean-generic \
clean-libtool cscope cscopelist-am ctags ctags-am dist \
dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
dist-xz dist-zip distcheck distclean distclean-generic \
distclean-hdr distclean-libtool distclean-tags distcleancheck \
distdir distuninstallcheck dvi dvi-am html html-am info \
info-am install install-am install-data install-data-am \
install-dvi install-dvi-am install-exec install-exec-am \
install-html install-html-am install-info install-info-am \
install-man install-pdf install-pdf-am install-pkgconfigDATA \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
2010-01-07 22:51:32 +00:00
maintainer-clean-generic mostlyclean mostlyclean-generic \
2014-06-09 23:10:15 +00:00
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am uninstall-pkgconfigDATA
2010-01-07 22:51:32 +00:00
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: