First draft of a more complete TS6 server protocol description.

This commit is contained in:
Jilles Tjoelker 2009-01-25 21:11:28 +01:00
parent 0f3f5496b8
commit 03a905bd21
1 changed files with 890 additions and 0 deletions

View File

@ -0,0 +1,890 @@
TS6 protocol description
Written by Jilles Tjoelker
General format: much like rfc1459
Maximum parameters for a command: 15 (this does not include the prefix
and command name)
SID: a server's unique ID. It is configured in each server and consists of
a digit and two alphanumerics. Sending SIDs with lowercase letters is
questionable.
UID: a client's unique ID. It consists of the server's SID and six
alphanumerics (so it is nine characters long). The first of the alphanumerics
should be a letter, numbers are legal but reserved for future use.
hunted: a parameter type used for various remote requests. From local users,
nicknames and server names are accepted, possibly with wildcards; from servers,
UIDs/SIDs (sending names or even wildcards is deprecated). This is done with
the function hunt_server(). Any rate limiting should be done locally.
duration: a parameter type used for ban durations. It is a duration in seconds.
A value of 0 means a permanent ban.
propagation: to which other servers the command is sent. For all commands
with a hunted parameter, the propagation is determined by that, and not
otherwise specified. Propagation broadcast means the command is sent to all
servers. Propagation one-to-one means the command is only sent to the target
or the server the target is on. Propagation none means the command is never
sent to another server if it is received. For some other commands, the
propagation depends on the parameters and is described in text.
services server: server mentioned in a service{} block. There are no services
servers on EFnet.
service: client with umode +S. This implies that it is on a services server.
user modes:
(all)
+D (deaf: does not receive channel messages)
+S (network service) (only settable on burst from a services server)
+a (appears as server administrator)
+i (invisible, see rfc1459)
+o (IRC operator, see rfc1459)
+w (wallops, see rfc1459) (always propagated for historical reasons)
(charybdis TS6)
+Q/+R/+g/+l/+s/+z (only locally effective)
+Z (ssl user) (only settable on burst)
possibly more added by modules
channel modes:
(all)
statuses
+o (prefix @) (ops)
+v (prefix +) (voice)
type A
+b (ban)
+e (ban exception)
+I (invite exception)
type B
+k (key: password required to join, <= 23 ascii chars, no : or , or whitespace)
type C
+l (limit: maximum number of members before further joins are disallowed)
type D
+m (moderated)
+n (no external messages)
+p (private: does not appear in /whois to non-members, no /knock allowed)
+r (only registered users may join) (only if a services server exists)
+s (secret)
+t (only chanops may change topic)
(charybdis TS6)
type A
+q (quiet)
type C
+f (forward: channel name <= 30 chars)
+j (join throttle: N:T with integer N and T)
type D
+F (free target for +f)
+L (large ban list)
+P (permanent: does not disappear when empty)
+Q (ignore forwards to this)
+c (strip colours)
+g (allow any member to /invite)
+z (send messages blocked by +m to chanops)
ADMIN
source: user
parameters: hunted
Remote ADMIN request.
AWAY
source: user
propagation: broadcast
parameters: opt. away reason
If the away reason is empty or not present, mark the user as not away.
Otherwise, mark the user as away.
Changing away reason from one non-empty string to another non-empty string
may not be propagated.
BMASK
source: server
propagation: broadcast
parameters: channelTS, channel, type, space separated masks
If the channelTS in the message is greater (newer) than the current TS of
the channel, drop the message and do not propagate it.
Type is the mode letter of a ban-like mode. In efnet TS6 this is 'b', 'e' or
'I'. In charybdis TS6 additionally 'q' is possible.
Add all the masks to the given list of the channel.
All ban-like modes must be bursted using this command, not using MODE or TMODE.
CAPAB
source: unregistered server
propagation: none
parameters: space separated capability list
Sends capabilities of the server. This must include QS and ENCAP.
CHGHOST
charybdis TS6
source: any
propagation: broadcast
parameters: client, new hostname
Changes the visible hostname of a client.
Opers are notified unless the source is a server or a service.
CONNECT
source: any
parameters: server to connect to, port, hunted
Remote connect request. A server WALLOPS should be sent by the receiving
server.
The port can be 0 for the default port.
DLINE
charybdis TS6
encap only
source: user
parameters: duration, mask, reason
Sets a D:line (IP ban checked directly after accepting connection).
The mask must be an IP address or CIDR mask.
ENCAP
source: any
parameters: target server mask, subcommand, opt. parameters...
Sends a command to all servers with names matching the given mask (for example
'*', '*.example.com', 'irc.example.com'). Those servers do not have to be
directly connected. Targets cannot be SIDs.
Propagation is independent of understanding the subcommand.
ERROR
source: server or unregistered server
propagation: none
parameters: error message
Reports a (usually fatal) error with the connection.
Error messages may contain IP addresses and have a negative effect on server
IP hiding.
ETRACE
encap only
encap target: single server
source: oper
parameters: client
Remote ETRACE information request.
EUID
charybdis TS6
capab: EUID
source: server
parameters: nickname, hopcount, nickTS, umodes, username, visible hostname, IP address, UID, real hostname, account name, gecos
propagation: broadcast
Introduces a client. The client is on the source server of this command.
The account name is '0' if the user is not logged in with services.
Nick TS rules apply.
EUID is similar to UID but includes the ENCAP REALHOST and ENCAP LOGIN
information.
GCAP
encap only
encap target: *
source: server
parameters: space separated capability list
Capability list of remote server.
INFO
source: user
parameters: hunted
Remote INFO request.
INVITE
source: user
parameters: target user, channel, opt. channelTS
propagation: one-to-one
Invites a user to a channel.
If the channelTS is greater (newer) than the current TS of the channel, drop
the message.
Not sending the channelTS parameter is deprecated.
JOIN
1.
source: user
parameters: '0' (one ASCII zero)
propagation: broadcast
Parts the source user from all channels.
2.
source: user
parameters: channelTS, channel, '+' (a plus sign)
propagation: broadcast
Joins the source user to the given channel. If the channel does not exist yet,
it is created with the given channelTS and no modes. If the channel already
exists and has a greater (newer) TS, wipe all simple modes and statuses and
change the TS, notifying local users of this but not servers (note that
ban-like modes remain intact; invites may or may not be cleared).
KICK
source: any
parameters: channel, target user, opt. reason
propagation: broadcast
Kicks the target user from the given channel.
Unless the channel's TS is 0, no check is done whether the source user has ops.
Not sending the reason parameter is questionable.
KILL
source: any
parameters: target user, path
propagation: broadcast
Removes the user from the network.
The format of the path parameter is some sort of description of the source of
the kill followed by a space and a parenthesized reason. To avoid overflow,
it is recommended not to add anything to the path.
KLINE
1.
encap only
source: user
parameters: duration, user mask, host mask, reason
Sets a K:line (ban on user@host).
2.
capab: KLN
source: user
parameters: target server mask, duration, user mask, host mask, reason
As form 1, deprecated.
KNOCK
source: user
parameters: channel
propagation: broadcast
Requests an invite to a channel that is locked somehow (+ikl). Notifies all
operators of the channel. (In charybdis, on +g channels all members are
notified.)
This is broadcast so that each server can store when KNOCK was used last on
a channel.
LINKS
source: user
parameters: hunted, server mask
Remote LINKS request. The server mask limits which servers are listed.
LOGIN
encap only
source: user
parameters: account name
In a burst, states that the source user is logged in as the account.
LUSERS
source: user
parameters: server mask, hunted
Remote LUSERS request. Most servers ignore the server mask, treating it as '*'.
MODE
1.
source: user
parameters: client, umode changes
propagation: broadcast
Propagates a user mode change. The client parameter must refer to the same user
as the source.
Not all umodes are propagated to other servers.
2.
source: any
parameters: channel, cmode changes, opt. cmode parameters...
Propagates a channel mode change.
This is deprecated because the channelTS is not included. If it is received,
it should be propagated as TMODE.
MOTD
source: user
parameters: hunted
Remote MOTD request.
NICK
1.
source: user
parameters: new nickname, new nickTS
propagation: broadcast
Propagates a nick change.
2.
source: server
parameters: nickname, hopcount, nickTS, umodes, username, hostname, server, gecos
Historic TS5 user introduction. The user is on the server indicated by the
server parameter; the source server is meaningless (local link).
NICKDELAY
charybdis TS6
encap only
encap target: *
source: services server
parameters: duration, nickname
If duration is greater than 0, makes the given nickname unavailable for that
time.
If duration is 0, removes a nick delay entry for the given nickname.
There may or may not be a client with the given nickname; this does not affect
the operation.
NOTICE
source: any
parameters: msgtarget, message
As PRIVMSG, except NOTICE messages are sent out, server sources are permitted
and most error messages are suppressed.
OPERSPY
encap only
encap target: *
source: user
parameters: command name, parameters
Reports operspy usage.
OPERWALL
source: user
parameters: message
propagation: broadcast
Sends a message to operators (with umode +z set).
PART
source: user
parameters: comma separated channel list, message
Parts the source user from the given channels.
PASS
source: unregistered server
parameters: password, 'TS', TS version, SID
Sends the server link password, TS version and SID.
PING
source: any
parameters: origin, destination server
Sends a PING to the destination server, which will reply with a PONG.
The origin field is not used in the server protocol.
Remote PINGs are used for end-of-burst detection, therefore all servers must
implement them.
PONG
source: server
parameters: origin, destination
Routes a PONG back to the destination that originally sent the PING.
PRIVMSG
source: user
parameters: msgtarget, message
Sends a normal message (PRIVMSG) to the given target.
The target can be:
- a client
propagation: one-to-one
- a channel name
propagation: all servers with -D users on the channel
(cmode +m/+n should be checked everywhere, bans should not be checked
remotely)
- a status character ('@'/'+') followed by a channel name, to send to users
with that status or higher only.
propagation: all servers with -D users with appropriate status
- a user@server message, to send to users on a specific server. The exact
meaning of the part before the '@' is not prescribed, except that "opers"
allows IRC operators to send to all IRC operators on the server in an
unspecified format.
propagation: one-to-one
- a message to all users on server names matching a mask ('$$' followed by mask)
propagation: broadcast
- a message to all users with hostnames matching a mask ('$#' followed by mask).
Note that this is often implemented poorly.
propagation: broadcast
PRIVS
charybdis TS6
encap only
encap target: single server
source: oper
parameters: client
Remote PRIVS information request.
QUIT
source: user
parameters: comment
Propagates quitting of a client. No QUIT should be sent for a client that
has been removed as result of a KILL message.
REALHOST
charybdis TS6
encap only
encap target: *
source: user
parameters: real hostname
In a burst, propagates the real host of a dynamically-spoofed user.
REHASH
charybdis TS6
encap only
source: user
parameters: opt. rehash type
Remote REHASH request. If the rehash type is omitted, it is equivalent to
a regular /rehash, otherwise it is equivalent to /rehash <rehash type>.
RESV
1.
encap only
source: user
parameters: duration, mask, reason
Sets a RESV, making a nickname mask or exact channel unavailable.
2.
capab: CLUSTER
source: user
parameters: target server mask, duration, mask, reason
As form 1, deprecated.
RSFNC
encap only
capab: RSFNC
encap target: single server
source: services server
parameters: target user, new nickname, old nickTS, new nickTS
Forces a nickname change and propagates it.
The command is ignored if the nick TS of the user is not equal to the old
nickTS parameter. If the new nickname already exists (and is not the target
user), it is killed first.
SASL
charybdis TS6
encap only
1.
encap target: *
source: server
parameters: source uid, '*', 'S', sasl mechanism name
Requests that a SASL agent (a service) initiate the authentication process.
The source uid is that of an unregistered client. This is why it is not sent
as the prefix.
2.
encap target: single server
source: server
parameters: source uid, target uid, mode, data
Part of a SASL authentication exchange. The mode is 'C' to send some data
(base64 encoded), or 'S' to end the exchange (data indicates type of
termination: 'A' for abort, 'F' for authentication failure, 'S' for
authentication success).
SAVE
capab: SAVE
source: server
propagation: broadcast
parameters: target uid, TS
Resolve a nick collision by changing a nickname to the UID.
The server should verify that the UID belongs to a registered user, the user
does not already have their UID as their nick and the TS matches the user's
nickTS. If not, drop the message.
SAVE should be propagated as a regular NICK change to links without SAVE capab.
present.
SERVER
1.
source: unregistered server
parameters: server name, hopcount, server description
Registers the connection as a server. PASS and CAPAB must have been sent
before, SVINFO should be sent afterwards.
If there is no such server configured or authentication failed, the connection
should be dropped.
This is propagated as a SID message.
2.
source: server
propagation: broadcast
parameters: server name, hopcount, server description
Introduces a new TS5 server, directly connected to the source of this command.
This is only used for jupes as TS5 servers may do little else than existing.
SID
source: server
propagation: broadcast
parameters: server name, hopcount, sid, server description
Introduces a new server, directly connected to the source of this command.
SIGNON
source: user
propagation: broadcast
parameters: new nickname, new username, new visible hostname, new nickTS, new login name
Broadcasts a change of several user parameters at once.
Currently only sent after an SVSLOGIN.
SJOIN
source: server
propagation: broadcast
parameters: channelTS, simple modes, opt. mode parameters..., nicklist
Broadcasts a channel creation or bursts a channel.
The nicklist consists of users joining the channel, with status prefixes for
their status ('@+', '@', '+' or ''), for example:
'@+1JJAAAAAB +2JJAAAA4C 1JJAAAADS'. All users must be behind the source server
so it is not possible to use this message to force users to join a channel.
The interpretation depends on the channelTS and the current TS of the channel.
If either is 0, set the channel's TS to 0 and accept all modes. Otherwise, if
the incoming channelTS is greater (newer), ignore the incoming simple modes
and statuses and join and propagate just the users. If the incoming channelTS
is lower (older), wipe all modes and change the TS, notifying local users of
this but not servers (invites may be cleared). In the latter case, kick on
split riding may happen: if the key (+k) differs or the incoming simple modes
include +i, kick all local users, sending KICK messages to servers.
SJOIN must be used to propagate channel creation and in netbursts. For regular
users joining channels, JOIN must be used. Pseudoservers may use SJOIN to join
a user with ops.
SNOTE
charybdis TS6
encap only
source: server
parameters: snomask letter, text
Sends the text as a server notice from the source server to opers with the
given snomask set.
SQUIT
parameters: target server, comment
Removes the target server and all servers and users behind it from the network.
If the target server is the receiving server or the local link this came from,
this is an announcement that the link is being closed.
Otherwise, if the target server is locally connected, the server should send
a WALLOPS announcing the SQUIT.
STATS
source: user
parameters: stats letter, hunted
Remote STATS request. Privileges are checked on the server executing the
actual request.
SU
encap only
encap target: *
source: services server
parameters: target user, new login name (optional)
If the new login name is not present or empty, mark the target user as not
logged in, otherwise mark the target user as logged in as the given account.
SVINFO
source: server
propagation: none
parameters: current TS version, minimum TS version, '0', current time
Verifies TS protocol compatibility and clock. If anything is not in order,
the link is dropped.
The current TS version is the highest version supported by the source server
and the minimum TS version is the lowest version supported.
The current time is sent as a TS in the usual way.
SVSLOGIN
charybdis TS6
encap only
encap target: single server
source: services server
parameters: target, new nick, new username, new visible hostname, new login name
Sent after successful SASL authentication.
The target is a UID, typically an unregistered one.
Any of the "new" parameters can be '*' to leave the corresponding field
unchanged. The new login name can be '0' to log the user out.
If the UID is registered on the network, a SIGNON with the changes will be
broadcast, otherwise the changes will be stored, to be used when registration
completes.
TB
source: server
propagation: broadcast
parameters:
TIME
source: user
parameters: hunted
Remote TIME request.
TMODE
source: any
parameters: channelTS, channel, cmode changes, opt. cmode parameters...
Propagates a channel mode change.
If the channelTS is greater (newer) than the current TS of the channel, drop
the message.
On input, only the limit on parameters per line restricts how many cmode
parameters can be present. Apart from this, arbitrary modes shall be
processed. Redundant modes may be dropped. For example, +n-n may be applied and
propagated as +n-n, -n or (if the channel was already -n) nothing, but not as
+n.
The parameter for mode -k (removing a key) shall be ignored.
On output, at most ten cmode parameters should be sent; if there are more,
multiple TMODE messages should be sent.
TOPIC
source: user
propagation: broadcast
Propagates a channel topic change. The server may verify that the source has
ops in the channel.
TRACE
source: user
1.
parameters: hunted
Performs a trace to the target, sending 200 numerics from each server passing
the message on. The target server sends a description of the target followed
by a 262 numeric.
TRACE, STATS l and STATS L are the only commands using hunt_server that use the
hunted parameter for more than just determining which server the command
should be executed on.
2.
parameters: target name, hunted
Executes a trace command on the target server. No 200 numerics are sent.
The target name is a name, not a UID, and should be on the target server.
UID
source: server
propagation: broadcast
parameters: nickname, hopcount, nickTS, umodes, username, visible hostname, IP address, UID, gecos
propagation: broadcast
Introduces a client. The client is on the source server of this command.
Nick TS rules apply.
UNDLINE
charybdis TS6
encap only
source: user
parameters: mask
Removes a D:line (IP ban checked directly after accepting connection).
The mask must be an IP address or CIDR mask.
UNKLINE
1.
encap only
source: user
parameters: user mask, host mask
Removes a K:line (ban on user@host).
2.
capab: UNKLN
source: user
parameters: target server mask, user mask, host mask
As form 1, deprecated.
UNRESV
1.
encap only
source: user
parameters: mask
Removes a RESV.
2.
capab: CLUSTER
source: user
parameters: target server mask, mask
As form 1, deprecated.
UNXLINE
1.
encap only
source: user
parameters: mask
Removes an X:line (ban on realname).
2.
capab: CLUSTER
source: user
parameters: target server mask, mask
As form 1, deprecated.
USERS
source: user
parameters: hunted
Remote USERS request.
VERSION
source: any
parameters: hunted
Remote VERSION request.
WALLOPS
1.
source: user
parameters: message
propagation: broadcast
In efnet TS6, sends a message to operators (with umode +z set). This is a
deprecated equivalent to OPERWALL.
In charybdis TS6, sends a message to local users with umode +w set (or possibly
another indication that WALLOPS messages should be sent), including non-opers.
2.
source: server
parameters: message
propagation: broadcast
Sends a message to local users with umode +w set (or possibly another
indication that WALLOPS messages should be sent).
In efnet TS6 this may include non-opers, in charybdis TS6 this may only be
sent to opers.
WHOIS
source: user
parameters: hunted, target nick
Remote WHOIS request.
XLINE
1.
encap only
source: user
parameters: duration, mask, reason
Sets an X:line (ban on realname).
2.
capab: CLUSTER
source: user
parameters: target server mask, duration, mask, reason
As form 1, deprecated.
Local only commands (charybdis 3.1):
ACCEPT
AUTHENTICATE
CAP
CHALLENGE
CHANTRACE
CLOSE
CNOTICE
CPRIVMSG
DIE
GET
HELP
ISON
LIST
LOCOPS
MAP
MASKTRACE
MODLIST
MODLOAD
MODRELOAD
MODRESTART
MODUNLOAD
MONITOR
NAMES
OPER
POST
PUT
RESTART
SCAN
SET
TESTGECOS
TESTLINE
TESTMASK
UHELP
UNREJECT
USER
USERHOST
WEBIRC
WHO
WHOWAS