d7a3d23cdd
Add channel::admin_on_channel_create, which gives users creating new channels +ao instead of +o, if enabled.
2010-07-29 14:22:33 -04:00
6898ce9dde
Add general::hide_channel_below_users option.
...
This allows server owners to set how many users must be in a channel before
/LIST will show it.
2010-07-10 01:28:21 -04:00
1fe75e33cc
mode api: Remove most modes from the chmode_table, and have them initialized in modeset files.
...
Modeset files are modules stored in shadowircd/modes. All they do is initalize
a set of modes on load, and orphan said modes on unload.
All cmodes not included in ircd-ratbox are now located in modeset files, rather
than being in the core. These modes no longer simply use defines, their
locations are stored in a the new struct module_modes. Each of these is set
when intializing the mode in the modeset files, and set to 0 when orphaning
the mode upon unloading the modeset file.
In addition, use_forward has been removed, as it is now obsoleted by modesets.
2010-07-02 19:09:46 -04:00
b25b4a7c5a
Add InfoServ to the default aliases in ShadowIRCd.
...
Its now in Atheme and enabled by default in Atheme so it seems intelligent to
do so here.
2010-06-23 02:20:04 -04:00
9f1913e7b8
Readd DroneBL to the list of default blacklist. Most of the trustworthiness
...
issues have been fixed. Keep EFNet RBL though. :)
2010-06-10 17:15:50 -04:00
4ea91f08c5
Recommend EFNet's RBL instead of DroneBL due to trustworthiness issues.
...
(StaticBox policy change as of May 14, 2010.)
2010-05-14 08:49:26 -05:00
1add004b97
Change kicknorejoin to be hardcoded to 2 seconds instead of a
...
configurable opton.
2010-05-21 04:20:45 -04:00
fa6495b47f
Clarify no_oper_flood option in the reference.conf
2010-04-08 21:41:15 -04:00
1434082803
Change config option for ident_timeout to default_ident_timeout as jilles
...
recommended. Also update the TODO. Also, cocks.
2010-04-05 16:29:11 -04:00
e50ed244f4
Add a configuration option for ident_timeout.
2010-04-05 15:28:44 -04:00
ef07b59ac8
Add helpchan and helpurl that tell users the official help channel
...
and (optionally) link them to your network's specific helppages on
the intertubes. It is shown in /quote help (with no extra parameters).
2010-03-28 14:08:47 -04:00
9b9d818b32
Add propagated resvs, like klines and xlines.
2010-03-27 16:13:57 +01:00
112e8a666b
Add propagated xlines, like klines.
2010-03-16 23:05:50 +01:00
504f309e38
Add option general::use_propagated_bans to allow disabling new KLINE.
...
If this option is yes (default), KLINE by itself sets global (propagated) bans.
If this option is no, KLINE by itself sets a local kline following cluster{},
compatible with 3.2 and older versions.
2010-03-27 14:58:04 -04:00
b791dea807
Some reference.conf cleanups.
2010-03-25 23:10:52 -04:00
069f104a2e
Add shared::modules option, remote module stuff coming later/soon.
2010-03-24 15:50:15 -04:00
74e3e4f1e2
Add DIE shared option for remote restart and die which are on their
...
way next.
2010-03-23 14:19:48 -04:00
706f2ddf1a
Add the note that no_oper_flood needs to be enabled for true_no_oper_flood
...
to work correctly.
2010-03-21 01:06:57 -04:00
1cc810d3a7
Add general::true_no_oper_flood . I'm not going to explain it here.
...
Ask me what it does on IRC if you're curious.
2010-03-21 00:14:02 -04:00
baca17aeb3
Some minor conf cleanups.
2010-03-18 13:50:47 -04:00
853058531a
Added m_cycle and added it to all the appropriate locations.
2010-03-15 15:35:32 -04:00
3c0f833420
Add OKICK to documentation.
2010-03-14 17:25:53 -04:00
6b2d7a74ce
Fix some indentation in reference.conf.
2010-03-13 23:26:23 -05:00
e78f685073
Add use_part_messages config option. When disabled, this will show
...
all PARTs without a message/reason. Recommended to set to no if
a static quit message is set.
2010-03-13 22:56:38 -05:00
c0e2aa60b8
Added static_quit support. Pretty much what the name implies.
2010-03-13 22:19:29 -05:00
c1c91f9438
s/owner/admin/ throughout the source code and docs.
2010-03-07 23:18:39 -05:00
82e5490f59
Add m_webirc to "default" loaded extensions in .conf files and
...
add a WEBIRC auth {} block for it to show how its used so you
don't have to read the source of the extension to figure it out.
2010-03-07 17:13:46 -05:00
2ec04d9c3b
Cleanup reference.conf a bit.
2010-03-06 15:58:15 -05:00
5814373ffa
Add +p/override to the umodes array in the reference.conf
2010-03-06 12:37:42 -05:00
f11e5895dc
Fix a few errors in the example configs (caused errors on starting the ircd).
2010-03-04 14:18:15 -05:00
1fbf6db662
Add extensions/m_oaccept , a module to allow opers to bypass +gGR with a command.
2010-03-04 01:40:13 -05:00
4ebf686203
Add oper:override priv to the .confs
2010-03-03 12:56:56 -05:00
e787d3a226
Add conf options for swhois and operstring, though they don't do anything yet.
2010-03-03 00:52:13 -05:00
9ace21a74d
First step of expiry of +p crap.
2010-03-02 20:33:58 -05:00
08e35f665f
Add operator::vhost option.
2010-03-02 18:46:08 -05:00
220c9db54d
Add general::default_operhost.
2010-03-02 01:57:25 -05:00
5ad94b5000
Add channel::exemptchanops, and make +cCDTNG support it.
2010-03-01 02:43:55 -05:00
0eceaff17a
Borrow some ircd-seven code to create channel::use_local_channels.
2010-02-28 22:42:59 -05:00
fdbbf311ef
Update refrence.conf's explanation of invex/except with warnings about disabling them via rehash.
2010-02-28 16:50:51 -05:00
16c19d9c7d
Add lines warning people of the confusion that awaits them upon disabling +ah and rehasing.
2010-02-28 14:58:44 -05:00
77f41d510f
Add extensions to the config file which were previously missing.
2010-02-28 14:30:06 -05:00
ce3ec6fbd3
Add to the descriptions of owner and halfop in refrence.conf.
2010-02-27 20:27:24 -05:00
46f0c51863
Add config options for owner and halfop.
2010-02-27 20:05:07 -05:00
846aa234b8
Add the +J channelmode and config options, though they don't do anything yet.
2010-02-26 00:30:39 -05:00
cff17f66fa
branch merge
2010-02-25 15:13:24 -05:00
da3ba37e04
Backed out changeset 0d7b5f2ac591
2010-02-25 15:13:12 -05:00
13ec57db15
autochanmodes support
2010-02-24 22:18:13 -05:00
5974ba0c55
Add the config handling code for expire_override_time config option.
...
Part one of override stuff. This is gonna be painful.
2010-02-24 20:28:17 -05:00
e2994faec6
Add the new umodes to documentation in refrence.conf.
2010-02-24 13:02:09 -05:00
b7ec309451
Fix some indentation in refrence.conf.
2010-02-24 12:43:05 -05:00
B.Greenham
JD Horelick
William Pitcock
Jilles Tjoelker