JD Horelick
9fc5811f79
Add GroupServ aliases to the shadowircd configs by default.
2010-09-04 18:31:18 -04:00
Jilles Tjoelker
9e94d9ea13
Add target change for channels.
...
This has a separate enabling option channel::channel_target_change.
It applies to PRIVMSG, NOTICE and TOPIC by unvoiced unopped non-opers.
The same slots are used for channels and users.
2010-08-28 20:02:42 -04:00
B.Greenham
d7a3d23cdd
Add channel::admin_on_channel_create, which gives users creating new channels +ao instead of +o, if enabled.
2010-07-29 14:22:33 -04:00
JD Horelick
6898ce9dde
Add general::hide_channel_below_users option.
...
This allows server owners to set how many users must be in a channel before
/LIST will show it.
2010-07-10 01:28:21 -04:00
B.Greenham
1fe75e33cc
mode api: Remove most modes from the chmode_table, and have them initialized in modeset files.
...
Modeset files are modules stored in shadowircd/modes. All they do is initalize
a set of modes on load, and orphan said modes on unload.
All cmodes not included in ircd-ratbox are now located in modeset files, rather
than being in the core. These modes no longer simply use defines, their
locations are stored in a the new struct module_modes. Each of these is set
when intializing the mode in the modeset files, and set to 0 when orphaning
the mode upon unloading the modeset file.
In addition, use_forward has been removed, as it is now obsoleted by modesets.
2010-07-02 19:09:46 -04:00
JD Horelick
b25b4a7c5a
Add InfoServ to the default aliases in ShadowIRCd.
...
Its now in Atheme and enabled by default in Atheme so it seems intelligent to
do so here.
2010-06-23 02:20:04 -04:00
JD Horelick
9f1913e7b8
Readd DroneBL to the list of default blacklist. Most of the trustworthiness
...
issues have been fixed. Keep EFNet RBL though. :)
2010-06-10 17:15:50 -04:00
William Pitcock
4ea91f08c5
Recommend EFNet's RBL instead of DroneBL due to trustworthiness issues.
...
(StaticBox policy change as of May 14, 2010.)
2010-05-14 08:49:26 -05:00
JD Horelick
1add004b97
Change kicknorejoin to be hardcoded to 2 seconds instead of a
...
configurable opton.
2010-05-21 04:20:45 -04:00
JD Horelick
1434082803
Change config option for ident_timeout to default_ident_timeout as jilles
...
recommended. Also update the TODO. Also, cocks.
2010-04-05 16:29:11 -04:00
JD Horelick
e50ed244f4
Add a configuration option for ident_timeout.
2010-04-05 15:28:44 -04:00
JD Horelick
ef07b59ac8
Add helpchan and helpurl that tell users the official help channel
...
and (optionally) link them to your network's specific helppages on
the intertubes. It is shown in /quote help (with no extra parameters).
2010-03-28 14:08:47 -04:00
JD Horelick
504f309e38
Add option general::use_propagated_bans to allow disabling new KLINE.
...
If this option is yes (default), KLINE by itself sets global (propagated) bans.
If this option is no, KLINE by itself sets a local kline following cluster{},
compatible with 3.2 and older versions.
2010-03-27 14:58:04 -04:00
JD Horelick
1cc810d3a7
Add general::true_no_oper_flood . I'm not going to explain it here.
...
Ask me what it does on IRC if you're curious.
2010-03-21 00:14:02 -04:00
B.Greenham
baca17aeb3
Some minor conf cleanups.
2010-03-18 13:50:47 -04:00
JD Horelick
853058531a
Added m_cycle and added it to all the appropriate locations.
2010-03-15 15:35:32 -04:00
B.Greenham
3c0f833420
Add OKICK to documentation.
2010-03-14 17:25:53 -04:00
JD Horelick
e78f685073
Add use_part_messages config option. When disabled, this will show
...
all PARTs without a message/reason. Recommended to set to no if
a static quit message is set.
2010-03-13 22:56:38 -05:00
JD Horelick
c0e2aa60b8
Added static_quit support. Pretty much what the name implies.
2010-03-13 22:19:29 -05:00
B.Greenham
c1c91f9438
s/owner/admin/ throughout the source code and docs.
2010-03-07 23:18:39 -05:00
JD Horelick
82e5490f59
Add m_webirc to "default" loaded extensions in .conf files and
...
add a WEBIRC auth {} block for it to show how its used so you
don't have to read the source of the extension to figure it out.
2010-03-07 17:13:46 -05:00
JD Horelick
f11e5895dc
Fix a few errors in the example configs (caused errors on starting the ircd).
2010-03-04 14:18:15 -05:00
B.Greenham
1fbf6db662
Add extensions/m_oaccept , a module to allow opers to bypass +gGR with a command.
2010-03-04 01:40:13 -05:00
JD Horelick
4ebf686203
Add oper:override priv to the .confs
2010-03-03 12:56:56 -05:00
B.Greenham
e787d3a226
Add conf options for swhois and operstring, though they don't do anything yet.
2010-03-03 00:52:13 -05:00
JD Horelick
9ace21a74d
First step of expiry of +p crap.
2010-03-02 20:33:58 -05:00
B.Greenham
08e35f665f
Add operator::vhost option.
2010-03-02 18:46:08 -05:00
B.Greenham
220c9db54d
Add general::default_operhost.
2010-03-02 01:57:25 -05:00
B.Greenham
5ad94b5000
Add channel::exemptchanops, and make +cCDTNG support it.
2010-03-01 02:43:55 -05:00
B.Greenham
0eceaff17a
Borrow some ircd-seven code to create channel::use_local_channels.
2010-02-28 22:42:59 -05:00
B.Greenham
77f41d510f
Add extensions to the config file which were previously missing.
2010-02-28 14:30:06 -05:00
B.Greenham
46f0c51863
Add config options for owner and halfop.
2010-02-27 20:05:07 -05:00
B.Greenham
846aa234b8
Add the +J channelmode and config options, though they don't do anything yet.
2010-02-26 00:30:39 -05:00
JD Horelick
cff17f66fa
branch merge
2010-02-25 15:13:24 -05:00
JD Horelick
da3ba37e04
Backed out changeset 0d7b5f2ac591
2010-02-25 15:13:12 -05:00
JD Horelick
13ec57db15
autochanmodes support
2010-02-24 22:18:13 -05:00
JD Horelick
5974ba0c55
Add the config handling code for expire_override_time config option.
...
Part one of override stuff. This is gonna be painful.
2010-02-24 20:28:17 -05:00
B.Greenham
4efc8651ac
Add hostserv/botserv aliases to the example confs.
2010-02-24 12:04:49 -05:00
B.Greenham
60e16d64e7
Add +x to default_umodes in the example confs, since we're loading ip_cloaking by default.
2010-02-24 11:57:52 -05:00
B.Greenham
28ba4f8f97
Let's not forget to save before we commit next time.
2010-02-24 11:52:03 -05:00
B.Greenham
e432274159
Uncomment extensions in the default configs that almost everyone is going to want enabled anyway.
2010-02-24 11:49:07 -05:00
B.Greenham
0c33b827d0
Add m_force to extensions/README and to the example config files.
2010-02-24 11:44:25 -05:00
B.Greenham
837a020a0c
Add general::secret_channels_in_whois.
2010-02-23 22:38:35 -05:00
JD Horelick
78d9febea1
Clean up the ip_cloaking mess. Remove the quite old ip_cloaking modules,
...
rename ip_cloaking_4.0 to ip_cloaking since because of umode additions,
shadow6 isn't link-compatible with charybdis anyway so might as well
have the cloaking on a expected umode.
2010-02-23 20:50:54 -05:00
JD Horelick
45b9f1cbc0
Added channel::host_in_topic.
2010-02-23 20:19:58 -05:00
JD Horelick
c3a0fde28f
Added cycle_host_change option.
2010-02-23 19:50:45 -05:00
JD Horelick
f34794d0a8
s/charybdis/shadowircd/ in some other reasonably user-facing places.
2010-02-23 01:27:23 -05:00
JD Horelick
87f58b4ffb
Add oper autojoin (with auth::autojoin_opers config option).
2010-02-23 00:41:14 -05:00
JD Horelick
fa72cee166
Added autojoin-on-connect (with auth::autojoin config option).
2010-02-23 00:22:37 -05:00
William Pitcock
790bfe43cb
Documentation updates for the ip_cloaking_4.0 transition.
2010-02-18 07:34:40 -06:00