/* doc/example.conf - brief example configuration file * * Copyright (C) 2000-2002 Hybrid Development Team * Copyright (C) 2002-2005 ircd-ratbox development team * Copyright (C) 2005-2006 charybdis development team * * $Id: example.conf 3582 2007-11-17 21:55:48Z jilles $ * * See reference.conf for more information. */ /* Extensions */ #loadmodule "extensions/chm_adminonly.so"; loadmodule "extensions/chm_operonly.so"; #loadmodule "extensions/chm_sslonly.so"; #loadmodule "extensions/chm_operonly_compat.so"; #loadmodule "extensions/chm_quietunreg_compat.so"; #loadmodule "extensions/chm_sslonly_compat.so"; #loadmodule "extensions/createauthonly.so"; loadmodule "extensions/extb_account.so"; loadmodule "extensions/extb_canjoin.so"; loadmodule "extensions/extb_channel.so"; loadmodule "extensions/extb_extgecos.so"; loadmodule "extensions/extb_oper.so"; loadmodule "extensions/extb_realname.so"; #loadmodule "extensions/extb_server.so"; #loadmodule "extensions/extb_ssl.so"; #loadmodule "extensions/hurt.so"; loadmodule "extensions/ip_cloaking.so"; #loadmodule "extensions/m_findforwards.so"; loadmodule "extensions/m_identify.so"; loadmodule "extensions/m_mkpasswd.so"; loadmodule "extensions/m_webirc.so"; #loadmodule "extensions/m_cycle.so"; #loadmodule "extensions/m_oaccept.so"; #loadmodule "extensions/m_opme.so"; #loadmodule "extensions/m_ojoin.so"; #loadmodule "extensions/m_omode.so"; #loadmodule "extensions/m_olist.so"; #loadmodule "extensions/m_okick.so"; #loadmodule "extensions/m_force.so"; #loadmodule "extensions/no_oper_invis.so"; loadmodule "extensions/sno_farconnect.so"; loadmodule "extensions/sno_globalkline.so"; loadmodule "extensions/sno_globaloper.so"; #loadmodule "extensions/sno_whois.so"; /* Modesets, load only one */ loadmodule "modes/shadowircd.so"; #loadmodule "modes/charybdis.so"; serverinfo { name = "hades.arpa"; sid = "42X"; description = "shadowircd test server"; network_name = "AthemeNET"; network_desc = "Your IRC network."; helpchan = "#help"; helpurl = "http://www.mynet.net/help"; hub = yes; /* On multi-homed hosts you may need the following. These define * the addresses we connect from to other servers. */ /* for IPv4 */ #vhost = "192.169.0.1"; /* for IPv6 */ #vhost6 = "3ffe:80e8:546::2"; /* ssl_private_key: our ssl private key */ ssl_private_key = "etc/test.key"; /* ssl_cert: certificate for our ssl server */ ssl_cert = "etc/test.cert"; /* ssl_dh_params: DH parameters, generate with openssl dhparam -out dh.pem 1024 */ ssl_dh_params = "etc/dh.pem"; /* ssld_count: number of ssld processes you want to start, if you * have a really busy server, using N-1 where N is the number of * cpu/cpu cores you have might be useful. A number greater than one * can also be useful in case of bugs in ssld and because ssld needs * two file descriptors per SSL connection. */ ssld_count = 1; /* default max clients: the default maximum number of clients * allowed to connect. This can be changed once ircd has started by * issuing: * /quote set maxclients */ default_max_clients = 1024; }; admin { name = "Lazy admin (lazya)"; description = "AthemeNET client server"; email = "nobody@127.0.0.1"; }; log { fname_userlog = "logs/userlog"; #fname_fuserlog = "logs/fuserlog"; fname_operlog = "logs/operlog"; #fname_foperlog = "logs/foperlog"; fname_serverlog = "logs/serverlog"; #fname_klinelog = "logs/klinelog"; fname_killlog = "logs/killlog"; fname_operspylog = "logs/operspylog"; #fname_ioerrorlog = "logs/ioerror"; }; /* class {} blocks MUST be specified before anything that uses them. That * means they must be defined before auth {} and before connect {}. */ class "users" { ping_time = 2 minutes; number_per_ident = 10; number_per_ip = 10; number_per_ip_global = 50; cidr_ipv4_bitlen = 24; cidr_ipv6_bitlen = 64; number_per_cidr = 200; max_number = 3000; sendq = 400 kbytes; }; class "opers" { ping_time = 5 minutes; number_per_ip = 10; max_number = 1000; sendq = 1 megabyte; }; class "server" { ping_time = 5 minutes; connectfreq = 5 minutes; max_number = 1; sendq = 4 megabytes; }; listen { /* If you want to listen on a specific IP only, specify host. * host definitions apply only to the following port line. */ #host = "192.169.0.1"; port = 5000, 6665 .. 6669; sslport = 9999; /* Listen on IPv6 (if you used host= above). */ #host = "3ffe:1234:a:b:c::d"; #port = 5000, 6665 .. 6669; #sslport = 9999; }; /* auth {}: allow users to connect to the ircd (OLD I:) * auth {} blocks MUST be specified in order of precedence. The first one * that matches a user will be used. So place spoofs first, then specials, * then general access, then restricted. */ auth { /* user: the user@host allowed to connect. Multiple IPv4/IPv6 user * lines are permitted per auth block. This is matched against the * hostname and IP address (using :: shortening for IPv6 and * prepending a 0 if it starts with a colon) and can also use CIDR * masks. */ user = "*@172.16.0.0/12"; user = "*test@123D:B567:*"; /* password: an optional password that is required to use this block. * By default this is not encrypted, specify the flag "encrypted" in * flags = ...; below if it is. */ password = "letmein"; /* spoof: fake the users user@host to be be this. You may either * specify a host or a user@host to spoof to. This is free-form, * just do everyone a favour and dont abuse it. (OLD I: = flag) */ spoof = "I.still.hate.packets"; /* autojoin: Channel (or channels, comma-seperated) to join users * in this auth block to on connect. Note that this won't join * the user through any bans or otherwise restrictive chmodes. */ autojoin = "#shadowircd,#test"; /* autojoin_opers : Channel (or channels, comma-seperated) to join * opers to on oper-up. */ autojoin_opers = "#opers,#help"; /* Possible flags in auth: * * encrypted | password is encrypted with mkpasswd * spoof_notice | give a notice when spoofing hosts * exceed_limit (old > flag) | allow user to exceed class user limits * kline_exempt (old ^ flag) | exempt this user from k/g/xlines&dnsbls * dnsbl_exempt | exempt this user from dnsbls * spambot_exempt | exempt this user from spambot checks * shide_exempt | exempt this user from serverhiding * jupe_exempt | exempt this user from generating * warnings joining juped channels * resv_exempt | exempt this user from resvs * flood_exempt | exempt this user from flood limits * USE WITH CAUTION. * no_tilde (old - flag) | don't prefix ~ to username if no ident * need_ident (old + flag) | require ident for user in this class * need_ssl | require SSL/TLS for user in this class * need_sasl | require SASL id for user in this class */ flags = kline_exempt, exceed_limit; /* class: the class the user is placed in */ class = "opers"; }; /* Example WEBIRC authblock */ auth { /* user: webirc@IP.OF.YOUR.WEBIRC . the webirc@ part is required */ user = "webirc@192.168.1.1"; /* password: password the webirc client sends in the WEBIRC command. * You can use a encrypted password here (see above auth block). */ password = ""; /* spoof: This is required to keep it what it is currently if you * want the webirc client to show the users' real host as their * host on IRC. */ spoof = "webirc."; class = "users"; }; auth { user = "*@*"; class = "users"; }; /* privset {} blocks MUST be specified before anything that uses them. That * means they must be defined before operator {}. */ privset "local_op" { privs = oper:local_kill, oper:operwall; }; privset "server_bot" { extends = "local_op"; privs = oper:kline, oper:remoteban, snomask:nick_changes; }; privset "global_op" { extends = "local_op"; privs = oper:global_kill, oper:routing, oper:kline, oper:unkline, oper:xline, oper:resv, oper:mass_notice, oper:remoteban; }; privset "admin" { extends = "global_op"; privs = oper:admin, oper:die, oper:rehash, oper:spy, oper:override; }; operator "god" { /* name: the name of the oper must go above */ /* user: the user@host required for this operator. CIDR *is* * supported now. auth{} spoofs work here, other spoofs do not. * multiple user="" lines are supported. */ user = "*god@127.0.0.1"; /* password: the password required to oper. Unless ~encrypted is * contained in flags = ...; this will need to be encrypted using * mkpasswd, MD5 is supported */ password = "etcnjl8juSU1E"; /* rsa key: the public key for this oper when using Challenge. * A password should not be defined when this is used, see * doc/challenge.txt for more information. */ #rsa_public_key_file = "/usr/local/ircd/etc/oper.pub"; /* umodes: the specific umodes this oper gets when they oper. * If this is specified an oper will not be given oper_umodes * These are described above oper_only_umodes in general {}; */ #umodes = locops, servnotice, operwall, wallop; /* fingerprint: if specified, the oper's client certificate * fingerprint will be checked against the specified fingerprint * below. */ #fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b"; /* snomask: specific server notice mask on oper up. * If this is specified an oper will not be given oper_snomask. */ snomask = "+Zbfkrsuy"; /* vhost: defines the vhost that this oper will get on oper up. * this must be a valid hostmask. If this is specified the oper * will not be given default_operhost. */ vhost = "is.an.oper"; /* swhois: defines an additional line that will be displayed * whenever someone does /whois on the oper in question. */ swhois = "is wearing pants."; /* operstring: defines a custom operstring for this oper, * which will be shown in whois instead of default_operstring * or default_adminstring. */ operstring = "is a lazy IRC Operator"; /* flags: misc options for the operator. You may prefix an option * with ~ to disable it, e.g. ~encrypted. * * Default flags are encrypted. * * Available options: * * encrypted: the password above is encrypted [DEFAULT] * need_ssl: must be using SSL/TLS to oper up */ flags = encrypted; /* privset: privileges set to grant */ privset = "admin"; }; connect "irc.uplink.com" { host = "192.168.0.1"; send_password = "password"; accept_password = "anotherpassword"; port = 6666; hub_mask = "*"; class = "server"; flags = compressed, topicburst; /* If the connection is IPv6, uncomment below. * Use 0::1, not ::1, for IPv6 localhost. */ #aftype = ipv6; }; connect "ssl.uplink.com" { host = "192.168.0.1"; send_password = "password"; accept_password = "anotherpassword"; port = 9999; hub_mask = "*"; class = "server"; flags = ssl, topicburst; }; service { name = "services.int"; }; cluster { name = "*"; flags = kline, tkline, unkline, xline, txline, unxline, resv, tresv, unresv; }; shared { oper = "*@*", "*"; flags = all; }; /* exempt {}: IPs that are exempt from Dlines and rejectcache. (OLD d:) */ exempt { ip = "127.0.0.1"; }; channel { autochanmodes = "nt"; exemptchanops = "NT"; use_halfop = yes; use_admin = yes; use_invex = yes; use_except = yes; use_knock = yes; use_local_channels = yes; knock_delay = 5 minutes; knock_delay_channel = 1 minute; max_chans_per_user = 15; max_bans = 100; max_bans_large = 500; default_split_user_count = 0; default_split_server_count = 0; no_create_on_split = no; no_join_on_split = no; burst_topicwho = yes; kick_on_split_riding = no; only_ascii_channels = no; cycle_host_change = yes; host_in_topic = yes; resv_forcepart = yes; }; serverhide { flatten_links = yes; links_delay = 5 minutes; hidden = no; disable_hidden = no; }; /* These are the blacklist settings. * You can have multiple combinations of host and rejection reasons. * They are used in pairs of one host/rejection reason. * * These settings should be adequate for most networks, and are (presently) * required for use on AthemeNet. * * Word to the wise: Do not use blacklists like SPEWS for blocking IRC * connections. * * As of charybdis 2.1.3, you can do some keyword substitution on the rejection * reason. The available keyword substitutions are: * * ${ip} - the user's IP * ${host} - the user's canonical hostname * ${dnsbl-host} - the dnsbl hostname the lookup was done against * ${nick} - the user's nickname * ${network-name} - the name of the network * * Note: AHBL (the providers of the below *.ahbl.org BLs) request that they be * contacted, via email, at admins@2mbit.com before using these BLs. * See for more information. */ blacklist { host = "rbl.efnetrbl.org"; reject_reason = "${nick}, your IP (${ip}) is listed in EFnet's RBL. For assistance, see http://efnetrbl.org/?i=${ip}"; host = "dnsbl.dronebl.org"; reject_reason = "${nick}, your IP (${ip}) is listed in DroneBL. For assistance, see http://dronebl.org/lookup_branded.do?ip=${ip}&network=${network-name}"; # host = "ircbl.ahbl.org"; # reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for having an open proxy. In order to protect ${network-name} from abuse, we are not allowing connections with open proxies to connect."; # # host = "tor.ahbl.org"; # reject_reason = "${nick}, your IP (${ip}) is listed as a TOR exit node. In order to protect ${network-name} from tor-based abuse, we are not allowing TOR exit nodes to connect to our network."; }; alias "NickServ" { target = "NickServ"; }; alias "ChanServ" { target = "ChanServ"; }; alias "OperServ" { target = "OperServ"; }; alias "MemoServ" { target = "MemoServ"; }; alias "HostServ" { target = "HostServ"; }; alias "BotServ" { target = "BotServ"; }; alias "InfoServ" { target = "InfoServ"; }; alias "NS" { target = "NickServ"; }; alias "CS" { target = "ChanServ"; }; alias "OS" { target = "OperServ"; }; alias "MS" { target = "MemoServ"; }; alias "HS" { target = "HostServ"; }; alias "BS" { target = "BotServ"; }; alias "IS" { target = "InfoServ"; }; general { hide_error_messages = opers; hide_spoof_ips = yes; /* * default umodes: umodes to set upon connection * If you have enabled the ip_cloaking extension, and you wish for * incoming clients to be cloaked upon connection, +x must be in * the umode string below. */ default_umodes = "+ix"; default_operstring = "is an IRC Operator"; default_adminstring = "is a Server Administrator"; default_operhost = "staff.testnet.net"; #static_quit = "I like turtles!"; servicestring = "is a Network Service"; disable_fake_channels = no; tkline_expire_notices = no; default_floodcount = 10; failed_oper_notice = yes; dots_in_ident=2; min_nonwildcard = 4; min_nonwildcard_simple = 3; max_accept = 100; max_monitor = 100; anti_nick_flood = yes; max_nick_time = 20 seconds; max_nick_changes = 5; anti_spam_exit_message_time = 5 minutes; use_part_messages = yes; ts_warn_delta = 30 seconds; ts_max_delta = 5 minutes; client_exit = yes; collision_fnc = yes; global_snotices = yes; dline_with_reason = yes; kline_delay = 0 seconds; kline_with_reason = yes; kline_reason = "K-Lined"; identify_service = "NickServ@services.int"; identify_command = "IDENTIFY"; non_redundant_klines = yes; warn_no_nline = yes; use_propagated_bans = yes; stats_e_disabled = no; stats_c_oper_only=no; stats_h_oper_only=no; stats_y_oper_only=no; stats_o_oper_only=yes; stats_P_oper_only=no; stats_i_oper_only=masked; stats_k_oper_only=masked; map_oper_only = no; operspy_admin_only = no; operspy_dont_care_user_info = no; secret_channels_in_whois = no; caller_id_wait = 1 minute; pace_wait_simple = 1 second; pace_wait = 10 seconds; short_motd = no; ping_cookie = no; connect_timeout = 30 seconds; default_ident_timeout = 5; disable_auth = no; no_oper_flood = yes; true_no_oper_flood = no; max_targets = 4; client_flood = 20; use_whois_actually = no; oper_only_umodes = operwall, locops, servnotice; oper_umodes = locops, servnotice, operwall, wallop; oper_snomask = "+s"; burst_away = yes; nick_delay = 0 seconds; # 15 minutes if you want to enable this reject_ban_time = 1 minute; reject_after_count = 3; reject_duration = 5 minutes; throttle_duration = 60; throttle_count = 4; expire_override_time = 5 minutes; }; modules { path = "modules"; path = "modules/autoload"; };