elemental-ircd/doc/example.conf

588 lines
16 KiB
Plaintext
Executable File

/* doc/example.conf - brief example configuration file
*
* Copyright (C) 2000-2002 Hybrid Development Team
* Copyright (C) 2002-2005 ircd-ratbox development team
* Copyright (C) 2005-2006 charybdis development team
*
* $Id: example.conf 3582 2007-11-17 21:55:48Z jilles $
*
* See reference.conf for more information.
*/
/* Extensions */
#loadmodule "extensions/chm_adminonly.so";
loadmodule "extensions/chm_operonly.so";
#loadmodule "extensions/chm_sslonly.so";
#loadmodule "extensions/chm_operonly_compat.so";
#loadmodule "extensions/chm_quietunreg_compat.so";
#loadmodule "extensions/chm_sslonly_compat.so";
#loadmodule "extensions/createauthonly.so";
loadmodule "extensions/extb_account.so";
loadmodule "extensions/extb_canjoin.so";
loadmodule "extensions/extb_channel.so";
loadmodule "extensions/extb_extgecos.so";
loadmodule "extensions/extb_oper.so";
loadmodule "extensions/extb_realname.so";
#loadmodule "extensions/extb_server.so";
#loadmodule "extensions/extb_ssl.so";
#loadmodule "extensions/hurt.so";
loadmodule "extensions/ip_cloaking.so";
#loadmodule "extensions/m_findforwards.so";
loadmodule "extensions/m_identify.so";
loadmodule "extensions/m_mkpasswd.so";
loadmodule "extensions/m_webirc.so";
#loadmodule "extensions/m_cycle.so";
#loadmodule "extensions/m_oaccept.so";
#loadmodule "extensions/m_opme.so";
#loadmodule "extensions/m_ojoin.so";
#loadmodule "extensions/m_omode.so";
#loadmodule "extensions/m_olist.so";
#loadmodule "extensions/m_okick.so";
#loadmodule "extensions/m_force.so";
#loadmodule "extensions/no_oper_invis.so";
loadmodule "extensions/sno_farconnect.so";
loadmodule "extensions/sno_globalkline.so";
loadmodule "extensions/sno_globaloper.so";
#loadmodule "extensions/sno_whois.so";
serverinfo {
name = "hades.arpa";
sid = "42X";
description = "shadowircd test server";
network_name = "AthemeNET";
network_desc = "Your IRC network.";
helpchan = "#help";
helpurl = "http://www.mynet.net/help";
hub = yes;
/* On multi-homed hosts you may need the following. These define
* the addresses we connect from to other servers. */
/* for IPv4 */
#vhost = "192.169.0.1";
/* for IPv6 */
#vhost6 = "3ffe:80e8:546::2";
/* ssl_private_key: our ssl private key */
ssl_private_key = "etc/test.key";
/* ssl_cert: certificate for our ssl server */
ssl_cert = "etc/test.cert";
/* ssl_dh_params: DH parameters, generate with openssl dhparam -out dh.pem 1024 */
ssl_dh_params = "etc/dh.pem";
/* ssld_count: number of ssld processes you want to start, if you
* have a really busy server, using N-1 where N is the number of
* cpu/cpu cores you have might be useful. A number greater than one
* can also be useful in case of bugs in ssld and because ssld needs
* two file descriptors per SSL connection.
*/
ssld_count = 1;
/* default max clients: the default maximum number of clients
* allowed to connect. This can be changed once ircd has started by
* issuing:
* /quote set maxclients <limit>
*/
default_max_clients = 1024;
};
admin {
name = "Lazy admin (lazya)";
description = "AthemeNET client server";
email = "nobody@127.0.0.1";
};
log {
fname_userlog = "logs/userlog";
#fname_fuserlog = "logs/fuserlog";
fname_operlog = "logs/operlog";
#fname_foperlog = "logs/foperlog";
fname_serverlog = "logs/serverlog";
#fname_klinelog = "logs/klinelog";
fname_killlog = "logs/killlog";
fname_operspylog = "logs/operspylog";
#fname_ioerrorlog = "logs/ioerror";
};
/* class {} blocks MUST be specified before anything that uses them. That
* means they must be defined before auth {} and before connect {}.
*/
class "users" {
ping_time = 2 minutes;
number_per_ident = 10;
number_per_ip = 10;
number_per_ip_global = 50;
cidr_ipv4_bitlen = 24;
cidr_ipv6_bitlen = 64;
number_per_cidr = 200;
max_number = 3000;
sendq = 400 kbytes;
};
class "opers" {
ping_time = 5 minutes;
number_per_ip = 10;
max_number = 1000;
sendq = 1 megabyte;
};
class "server" {
ping_time = 5 minutes;
connectfreq = 5 minutes;
max_number = 1;
sendq = 4 megabytes;
};
listen {
/* If you want to listen on a specific IP only, specify host.
* host definitions apply only to the following port line.
*/
#host = "192.169.0.1";
port = 5000, 6665 .. 6669;
sslport = 9999;
/* Listen on IPv6 (if you used host= above). */
#host = "3ffe:1234:a:b:c::d";
#port = 5000, 6665 .. 6669;
#sslport = 9999;
};
/* auth {}: allow users to connect to the ircd (OLD I:)
* auth {} blocks MUST be specified in order of precedence. The first one
* that matches a user will be used. So place spoofs first, then specials,
* then general access, then restricted.
*/
auth {
/* user: the user@host allowed to connect. Multiple IPv4/IPv6 user
* lines are permitted per auth block. This is matched against the
* hostname and IP address (using :: shortening for IPv6 and
* prepending a 0 if it starts with a colon) and can also use CIDR
* masks.
*/
user = "*@172.16.0.0/12";
user = "*test@123D:B567:*";
/* password: an optional password that is required to use this block.
* By default this is not encrypted, specify the flag "encrypted" in
* flags = ...; below if it is.
*/
password = "letmein";
/* spoof: fake the users user@host to be be this. You may either
* specify a host or a user@host to spoof to. This is free-form,
* just do everyone a favour and dont abuse it. (OLD I: = flag)
*/
spoof = "I.still.hate.packets";
/* autojoin: Channel (or channels, comma-seperated) to join users
* in this auth block to on connect. Note that this won't join
* the user through any bans or otherwise restrictive chmodes.
*/
autojoin = "#shadowircd,#test";
/* autojoin_opers : Channel (or channels, comma-seperated) to join
* opers to on oper-up.
*/
autojoin_opers = "#opers,#help";
/* Possible flags in auth:
*
* encrypted | password is encrypted with mkpasswd
* spoof_notice | give a notice when spoofing hosts
* exceed_limit (old > flag) | allow user to exceed class user limits
* kline_exempt (old ^ flag) | exempt this user from k/g/xlines&dnsbls
* dnsbl_exempt | exempt this user from dnsbls
* spambot_exempt | exempt this user from spambot checks
* shide_exempt | exempt this user from serverhiding
* jupe_exempt | exempt this user from generating
* warnings joining juped channels
* resv_exempt | exempt this user from resvs
* flood_exempt | exempt this user from flood limits
* USE WITH CAUTION.
* no_tilde (old - flag) | don't prefix ~ to username if no ident
* need_ident (old + flag) | require ident for user in this class
* need_ssl | require SSL/TLS for user in this class
* need_sasl | require SASL id for user in this class
*/
flags = kline_exempt, exceed_limit;
/* class: the class the user is placed in */
class = "opers";
};
/* Example WEBIRC authblock */
auth {
/* user: webirc@IP.OF.YOUR.WEBIRC . the webirc@ part is required */
user = "webirc@192.168.1.1";
/* password: password the webirc client sends in the WEBIRC command.
* You can use a encrypted password here (see above auth block).
*/
password = "<password>";
/* spoof: This is required to keep it what it is currently if you
* want the webirc client to show the users' real host as their
* host on IRC.
*/
spoof = "webirc.";
class = "users";
};
auth {
user = "*@*";
class = "users";
};
/* privset {} blocks MUST be specified before anything that uses them. That
* means they must be defined before operator {}.
*/
privset "local_op" {
privs = oper:local_kill, oper:operwall;
};
privset "server_bot" {
extends = "local_op";
privs = oper:kline, oper:remoteban, snomask:nick_changes;
};
privset "global_op" {
extends = "local_op";
privs = oper:global_kill, oper:routing, oper:kline, oper:unkline, oper:xline,
oper:resv, oper:mass_notice, oper:remoteban;
};
privset "admin" {
extends = "global_op";
privs = oper:admin, oper:die, oper:rehash, oper:spy, oper:override;
};
operator "god" {
/* name: the name of the oper must go above */
/* user: the user@host required for this operator. CIDR *is*
* supported now. auth{} spoofs work here, other spoofs do not.
* multiple user="" lines are supported.
*/
user = "*god@127.0.0.1";
/* password: the password required to oper. Unless ~encrypted is
* contained in flags = ...; this will need to be encrypted using
* mkpasswd, MD5 is supported
*/
password = "etcnjl8juSU1E";
/* rsa key: the public key for this oper when using Challenge.
* A password should not be defined when this is used, see
* doc/challenge.txt for more information.
*/
#rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
/* umodes: the specific umodes this oper gets when they oper.
* If this is specified an oper will not be given oper_umodes
* These are described above oper_only_umodes in general {};
*/
#umodes = locops, servnotice, operwall, wallop;
/* fingerprint: if specified, the oper's client certificate
* fingerprint will be checked against the specified fingerprint
* below.
*/
#fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b";
/* snomask: specific server notice mask on oper up.
* If this is specified an oper will not be given oper_snomask.
*/
snomask = "+Zbfkrsuy";
/* vhost: defines the vhost that this oper will get on oper up.
* this must be a valid hostmask. If this is specified the oper
* will not be given default_operhost.
*/
vhost = "is.an.oper";
/* swhois: defines an additional line that will be displayed
* whenever someone does /whois on the oper in question.
*/
swhois = "is wearing pants.";
/* operstring: defines a custom operstring for this oper,
* which will be shown in whois instead of default_operstring
* or default_adminstring.
*/
operstring = "is a lazy IRC Operator";
/* flags: misc options for the operator. You may prefix an option
* with ~ to disable it, e.g. ~encrypted.
*
* Default flags are encrypted.
*
* Available options:
*
* encrypted: the password above is encrypted [DEFAULT]
* need_ssl: must be using SSL/TLS to oper up
*/
flags = encrypted;
/* privset: privileges set to grant */
privset = "admin";
};
connect "irc.uplink.com" {
host = "192.168.0.1";
send_password = "password";
accept_password = "anotherpassword";
port = 6666;
hub_mask = "*";
class = "server";
flags = compressed, topicburst;
/* If the connection is IPv6, uncomment below.
* Use 0::1, not ::1, for IPv6 localhost. */
#aftype = ipv6;
};
connect "ssl.uplink.com" {
host = "192.168.0.1";
send_password = "password";
accept_password = "anotherpassword";
port = 9999;
hub_mask = "*";
class = "server";
flags = ssl, topicburst;
};
service {
name = "services.int";
};
cluster {
name = "*";
flags = kline, tkline, unkline, xline, txline, unxline, resv, tresv, unresv;
};
shared {
oper = "*@*", "*";
flags = all;
};
/* exempt {}: IPs that are exempt from Dlines and rejectcache. (OLD d:) */
exempt {
ip = "127.0.0.1";
};
channel {
autochanmodes = "nt";
exemptchanops = "NT";
use_halfop = yes;
use_admin = yes;
use_invex = yes;
use_except = yes;
use_knock = yes;
use_forward = yes;
use_local_channels = yes;
knock_delay = 5 minutes;
knock_delay_channel = 1 minute;
max_chans_per_user = 15;
max_bans = 100;
max_bans_large = 500;
default_split_user_count = 0;
default_split_server_count = 0;
no_create_on_split = no;
no_join_on_split = no;
burst_topicwho = yes;
kick_on_split_riding = no;
only_ascii_channels = no;
cycle_host_change = yes;
host_in_topic = yes;
resv_forcepart = yes;
};
serverhide {
flatten_links = yes;
links_delay = 5 minutes;
hidden = no;
disable_hidden = no;
};
/* These are the blacklist settings.
* You can have multiple combinations of host and rejection reasons.
* They are used in pairs of one host/rejection reason.
*
* These settings should be adequate for most networks, and are (presently)
* required for use on AthemeNet.
*
* Word to the wise: Do not use blacklists like SPEWS for blocking IRC
* connections.
*
* As of charybdis 2.1.3, you can do some keyword substitution on the rejection
* reason. The available keyword substitutions are:
*
* ${ip} - the user's IP
* ${host} - the user's canonical hostname
* ${dnsbl-host} - the dnsbl hostname the lookup was done against
* ${nick} - the user's nickname
* ${network-name} - the name of the network
*
* Note: AHBL (the providers of the below *.ahbl.org BLs) request that they be
* contacted, via email, at admins@2mbit.com before using these BLs.
* See <http://www.ahbl.org/services.php> for more information.
*/
blacklist {
host = "rbl.efnetrbl.org";
reject_reason = "${nick}, your IP (${ip}) is listed in EFnet's RBL. For assistance, see http://efnetrbl.org/?i=${ip}";
host = "dnsbl.dronebl.org";
reject_reason = "${nick}, your IP (${ip}) is listed in DroneBL. For assistance, see http://dronebl.org/lookup_branded.do?ip=${ip}&network=${network-name}";
# host = "ircbl.ahbl.org";
# reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for having an open proxy. In order to protect ${network-name} from abuse, we are not allowing connections with open proxies to connect.";
#
# host = "tor.ahbl.org";
# reject_reason = "${nick}, your IP (${ip}) is listed as a TOR exit node. In order to protect ${network-name} from tor-based abuse, we are not allowing TOR exit nodes to connect to our network.";
};
alias "NickServ" {
target = "NickServ";
};
alias "ChanServ" {
target = "ChanServ";
};
alias "OperServ" {
target = "OperServ";
};
alias "MemoServ" {
target = "MemoServ";
};
alias "HostServ" {
target = "HostServ";
};
alias "BotServ" {
target = "BotServ";
};
alias "InfoServ" {
target = "InfoServ";
};
alias "NS" {
target = "NickServ";
};
alias "CS" {
target = "ChanServ";
};
alias "OS" {
target = "OperServ";
};
alias "MS" {
target = "MemoServ";
};
alias "HS" {
target = "HostServ";
};
alias "BS" {
target = "BotServ";
};
alias "IS" {
target = "InfoServ";
};
general {
hide_error_messages = opers;
hide_spoof_ips = yes;
/*
* default umodes: umodes to set upon connection
* If you have enabled the ip_cloaking extension, and you wish for
* incoming clients to be cloaked upon connection, +x must be in
* the umode string below.
*/
default_umodes = "+ix";
default_operstring = "is an IRC Operator";
default_adminstring = "is a Server Administrator";
default_operhost = "staff.testnet.net";
#static_quit = "I like turtles!";
servicestring = "is a Network Service";
disable_fake_channels = no;
tkline_expire_notices = no;
default_floodcount = 10;
failed_oper_notice = yes;
dots_in_ident=2;
min_nonwildcard = 4;
min_nonwildcard_simple = 3;
max_accept = 100;
max_monitor = 100;
anti_nick_flood = yes;
max_nick_time = 20 seconds;
max_nick_changes = 5;
anti_spam_exit_message_time = 5 minutes;
use_part_messages = yes;
ts_warn_delta = 30 seconds;
ts_max_delta = 5 minutes;
client_exit = yes;
collision_fnc = yes;
global_snotices = yes;
dline_with_reason = yes;
kline_delay = 0 seconds;
kline_with_reason = yes;
kline_reason = "K-Lined";
identify_service = "NickServ@services.int";
identify_command = "IDENTIFY";
non_redundant_klines = yes;
warn_no_nline = yes;
use_propagated_bans = yes;
stats_e_disabled = no;
stats_c_oper_only=no;
stats_h_oper_only=no;
stats_y_oper_only=no;
stats_o_oper_only=yes;
stats_P_oper_only=no;
stats_i_oper_only=masked;
stats_k_oper_only=masked;
map_oper_only = no;
operspy_admin_only = no;
operspy_dont_care_user_info = no;
secret_channels_in_whois = no;
caller_id_wait = 1 minute;
pace_wait_simple = 1 second;
pace_wait = 10 seconds;
short_motd = no;
ping_cookie = no;
connect_timeout = 30 seconds;
default_ident_timeout = 5;
disable_auth = no;
no_oper_flood = yes;
true_no_oper_flood = no;
max_targets = 4;
client_flood = 20;
use_whois_actually = no;
oper_only_umodes = operwall, locops, servnotice;
oper_umodes = locops, servnotice, operwall, wallop;
oper_snomask = "+s";
burst_away = yes;
nick_delay = 0 seconds; # 15 minutes if you want to enable this
reject_ban_time = 1 minute;
reject_after_count = 3;
reject_duration = 5 minutes;
throttle_duration = 60;
throttle_count = 4;
expire_override_time = 5 minutes;
};
modules {
path = "modules";
path = "modules/autoload";
};