82d50a5796
Avoid outputting color setting sequences when not run on a terminal.
...
Currently TERM is checked for every message. Could be memoized, but it
would add complexity, and typical propellor output is not going to be more
than a few hundred messages, and likely this will be swamped by the actual
work.
2014-11-18 00:19:11 -04:00
46cd2ad0e0
DigitalOcean.distroKernel property now reboots into the distribution kernel when necessary.
...
It might be better to do this check on boot to limit the time running the
DO kernel (which is not well security supported), but that has the
possibility of entering a bad reboot loop. Limiting this check to when
propellor runs avoids that, while still fixing the problem pretty fast.
2014-11-17 16:42:15 -04:00
8d91b5de6b
Convert GpgKeyId to newtype
2014-11-15 17:02:30 -04:00
7902f705b0
update email
2014-11-15 15:03:54 -04:00
be27ae1503
changelog
2014-11-11 13:00:33 -04:00
929d26d556
changelog
2014-11-10 16:22:44 -04:00
9608a390d2
Added prosody module, contributed by Félix Sipma.
2014-11-10 11:15:41 -04:00
f3a31c9192
prep release
2014-11-08 15:57:46 -04:00
1187cd4901
Orphaned the Debian package, as I am retiring from Debian.
2014-11-08 15:57:33 -04:00
9755b761bb
Docker: Stop using docker.io; that was a compat symlink in the Debian package which has been removed in docker.io 1.3.1~dfsg1-2.
2014-11-08 15:55:58 -04:00
ef9abb9b67
Apache: Fix daemon reload when enabling a new module or site.
2014-10-31 17:47:52 -04:00
ca06c64bae
changelog
2014-10-31 10:21:27 -04:00
01509b040e
changelog
2014-10-30 16:36:37 -04:00
bbf258a075
update home page
2014-10-24 10:01:55 -04:00
b5ab8a7f9f
prep release
2014-10-24 09:57:52 -04:00
73a75cbefc
Fix loop when a docker host that does not exist was docked.
...
The problem is it fell back to looking for an alias for the bad hostname,
but to get the aliases, it needs to know which hosts are docked where,
so looped.
2014-10-23 12:11:43 -04:00
bdf3e37066
Revert "propellor spin"
...
This reverts commit 80f5b53f1b
2014-10-23 11:33:00 -04:00
80f5b53f1b
propellor spin
2014-10-23 11:26:05 -04:00
5bfeb3f9aa
Revert "propellor spin"
...
This reverts commit 7637ea0af9
2014-10-23 11:25:07 -04:00
7637ea0af9
propellor spin
2014-10-23 11:23:25 -04:00
856a4c673c
propellor spin
2014-10-23 03:27:40 -04:00
93099b8627
bugfix
2014-10-23 03:18:52 -04:00
df0c0e56cb
Docker: Avoid committing container every time it's started up.
...
This was using a lot of disk space. Instead, start the container, and then
use the running container to check if docker is running it with the right
params. In the unlikely case that the params have changed, we still need to
commit the container and restart it. The common case of eg a reboot no
longer commits though.
2014-10-10 13:47:41 -04:00
e7d8cbac1b
finalize release
2014-10-10 11:37:50 -04:00
7f17765de3
debCdn switched from cdn.debian.net to http.debian.net, which seems to be better managed now.
...
Conflicts:
debian/changelog
2014-10-10 11:37:22 -04:00
79ee61d958
stable suite changes
...
* Avoid encoding the current stable suite in propellor's code,
since that poses a difficult transition around the release,
and can easily be wrong if an older version of propellor is used.
Instead, the os property for a stable system includes the suite name
to use, eg Stable "wheezy".
* stdSourcesList uses the stable suite name, to avoid unwanted
immediate upgrades to the next stable release.
2014-10-10 11:27:54 -04:00
7ff8d0f8a2
prep release
2014-08-22 13:02:18 -04:00
81544b37a8
fix man page installation
2014-08-19 19:06:21 -04:00
11c1160655
reorg manpage
2014-08-19 18:06:00 -04:00
371f6077fd
prep release
2014-08-19 17:00:49 -04:00
3c61c109fb
ugly workaround for lack of history in repo distributed with debian package
2014-08-19 16:40:04 -04:00
1830f501ee
debian upgrade handling
...
The /usr/bin/propellor wrapper will warn when ~/.propellor/ is out of date
and a newer version is available from origin.
2014-08-19 15:22:42 -04:00
7d59dee469
local repo fully working now
2014-08-19 15:02:12 -04:00
b6c5f54741
The Debian package now includes a single-revision git repository in /usr/src/propellor/, and ~/.propellor/ is set up to use this repository as its "upstream" remote. This avoids relying on the security of the github repository when using the Debian package.
2014-08-19 14:35:38 -04:00
c3c1f921bb
upgrade note
2014-08-19 14:17:04 -04:00
1ed98cc755
Included the config.hs symlink to config-simple.hs in the cabal and Debian packages.
2014-08-19 14:16:53 -04:00
9d2cc7774b
prep release
2014-08-04 01:12:34 -04:00
02d7e6d5c6
changelog
2014-07-23 12:43:30 -04:00
98a3114763
propellor spin
2014-07-22 15:25:07 -04:00
0f3faffd36
changelog
2014-07-18 13:12:28 -04:00
5c3b069f23
changelog
2014-07-18 12:49:36 -04:00
55a638ad4c
Fix bug in File.containsLines that caused lines that were already in the file to sometimes be appended to the end.
2014-07-17 23:33:10 -04:00
54d2888a96
Remove .gitignore from cabal file list, to avoid build failure on Debian. Closes : #754334
2014-07-09 22:11:40 -04:00
e53faff843
propellor spin
2014-07-07 03:42:35 -04:00
8f46b7ab68
Run apt-get update in initial bootstrap.
...
For eg, Linode, which brings up hosts that have not updated at all so
apt-get install doesn't work.
2014-07-07 02:04:21 -04:00
5576955ec5
prep release
2014-07-06 18:28:19 -04:00
ab5159626d
twea
2014-07-06 18:28:05 -04:00
3db1ca1194
wording
2014-07-06 18:09:53 -04:00
2fde19656e
wording
2014-07-06 17:25:07 -04:00
5002b5e391
propellor spin
2014-07-06 16:32:05 -04:00
58f79c12aa
propellor spin
2014-07-06 15:56:56 -04:00
26f989b5ab
Hostname.sane now cleans up the 127.0.0.1 localhost line in /etc/hosts, to avoid eg, apache complaining that "Could not reliably determine the server's fully qualified domain name".
2014-07-06 12:23:57 -04:00
d062e21a5e
propellor spin
2014-07-05 17:57:19 -04:00
f674c56119
Add --list-fields to list a host's currently set privdata fields.
2014-06-19 14:56:50 -04:00
42594d6b4c
Add --edit to edit a privdata value in $EDITOR
2014-06-19 14:48:15 -04:00
b6fc95602d
prep release
2014-06-13 10:06:42 -04:00
dd554e20b9
When git gpg signature of a fetched git branch cannot be verified, propellor will now continue running, but without merging in that branch.
...
This way, propellor doesn't stop enforcing properties just because its new
configuration isn't ready. It just uses the old configuration.
2014-06-10 15:49:17 -04:00
c8c96a6908
changelog
2014-06-09 12:34:52 -04:00
fc49d75e4f
Attr is renamed to Info.
2014-06-09 01:47:11 -04:00
582be8ebe0
combineProperties no longer stops when a property fails; now it continues trying to satisfy all properties on the list before propigating the failure.
...
Audited all of my calls to combineProperties and they should be fine with
this behavior.. which suggests it's the right behavior.
2014-06-07 00:14:05 -04:00
2db48021f0
typo
2014-06-05 17:35:29 -04:00
0ba3e77f84
finalize release
2014-06-05 17:32:16 -04:00
c2dd54d167
prep release
2014-06-05 17:21:49 -04:00
4ac314fb48
Apt.stdSourcesList no longer needs a suite to be specified.
2014-06-05 17:01:32 -04:00
740740d215
Added --dump to dump out a field of a host's privdata. Useful for editing it.
2014-06-01 16:58:05 -04:00
d224463dcd
comment
2014-06-01 15:07:17 -04:00
84eb050085
Propellor's output now includes the hostname being provisioned, or when provisioning a docker container, the container name.
2014-05-31 18:44:49 -04:00
6383d8c388
propellor spin
2014-05-31 16:48:14 -04:00
0e8c6e5fee
prep release
2014-05-29 14:30:06 -04:00
0ec565a590
propellor spin
2014-05-23 12:30:25 -04:00
8ab6799d48
Ensure that kernel hostname is same as /etc/hostname when configuring hostname.
2014-05-19 10:51:28 -04:00
227effc1ad
Fix unattended-upgrades config for !stable.
2014-05-18 13:44:28 -04:00
c09babd5b7
prep release
2014-05-17 16:43:10 -04:00
2081a49b65
changelog
2014-05-14 20:36:23 -04:00
84efb9bdee
Licence changed from GPL to BSD.
2014-05-10 11:08:30 -03:00
72a6b1c759
prep release
2014-04-24 18:10:13 -04:00
e1ce4e2d05
propellor spin
2014-04-23 23:57:36 -04:00
34c7a14060
propellor spin
2014-04-23 15:04:35 -04:00
55f16b25a5
Add missing build deps and deps. Closes : #745459
2014-04-22 19:08:14 -04:00
66e492fa82
prep release
2014-04-19 17:38:15 -04:00
5fd4e6a5cf
change joeyconfig back after merging from master
2014-04-19 16:17:47 -04:00
2cfb22a59b
spit up TODO
2014-04-19 16:14:10 -04:00
9a070e66ec
add news feed
2014-04-19 15:56:19 -04:00
494f5d3bef
Merge branch 'joeyconfig'
2014-04-19 15:51:01 -04:00
86e7e4e58e
When unattendedUpgrades is enabled on an Unstable or Testing system, configure it to allow the upgrades.
2014-04-19 13:17:25 -04:00
8c12c5b8ec
Merge branch 'joeyconfig'
2014-04-19 11:42:31 -04:00
fffa3e003a
Dns primary and secondary properties are now revertable.
2014-04-19 11:00:48 -04:00
2279979d32
Removed root domain records from SOA. Instead, use RootDomain when calling Dns.primary.
2014-04-19 10:47:38 -04:00
5dd316a0ad
Merge branch 'joeyconfig'
2014-04-19 02:10:56 -04:00
6aeeaaab90
prep release
2014-04-19 02:10:41 -04:00
9e578aca6b
rename aka to alias
2014-04-19 01:28:46 -04:00
d1db64b3bc
Propellor can configure primary DNS servers, including generating zone files, which is done by looking at the properties of hosts in a domain.
2014-04-19 01:26:38 -04:00
7e9853520b
The `cname` property was renamed to `aka` as it does not always generate CNAME in the DNS.
2014-04-18 23:41:26 -04:00
5f6c3ad564
All Property combinators now combine together their Attr settings.
...
So Attr settings can be made inside a propertyList, for example.
2014-04-18 04:48:49 -04:00
4e4fb9ab7c
get rid of AttrProperty
...
Now both Property and RevertableProperty can influence Attr on their own.
2014-04-18 03:59:06 -04:00
27ff3e9f21
Merge branch 'joeyconfig'
2014-04-17 22:28:21 -04:00
0485387aa0
Run all cron jobs under chronic from moreutils to avoid unnecessary mails.
2014-04-17 21:01:06 -04:00
3d25c25171
Merge branch 'joeyconfig'
2014-04-17 20:11:23 -04:00
a19293732d
prep release
2014-04-17 20:09:14 -04:00
71b61ff9f3
use config.simple and allow building debian packages
...
This commit should not be merged into the config-joey branch.
2014-04-17 20:06:04 -04:00
Joey Hess