{ "version": "2.0", "service": "
Welcome to the Amazon Simple Queue Service API Reference.
Amazon Simple Queue Service (Amazon SQS) is a reliable, highly-scalable hosted queue for storing messages as they travel between applications or microservices. Amazon SQS moves data between distributed application components and helps you decouple these components.
Standard queues are available in all regions. FIFO queues are available in the US East (N. Virginia), US East (Ohio), US West (Oregon), and EU (Ireland) regions.
You can use AWS SDKs to access Amazon SQS using your favorite programming language. The SDKs perform tasks such as the following automatically:
Cryptographically sign your service requests
Retry requests
Handle error responses
Additional Information
Amazon Simple Queue Service Developer Guide
Amazon Web Services General Reference
Adds a permission to a queue for a specific principal. This allows sharing access to the queue.
When you create a queue, you have full control access rights for the queue. Only you, the owner of the queue, can grant or deny permissions to the queue. For more information about these permissions, see Shared Queues in the Amazon Simple Queue Service Developer Guide.
AddPermission
writes an Amazon-SQS-generated policy. If you want to write your own policy, use SetQueueAttributes
to upload your policy. For more information about writing your own policy, see Using The Access Policy Language in the Amazon Simple Queue Service Developer Guide.
Some actions take lists of parameters. These lists are specified using the param.n
notation. Values of n
are integers starting from 1. For example, a parameter list with two elements looks like this:
&Attribute.1=this
&Attribute.2=that
Changes the visibility timeout of a specified message in a queue to a new value. The maximum allowed timeout value is 12 hours. Thus, you can't extend the timeout of a message in an existing queue to more than a total visibility timeout of 12 hours. For more information, see Visibility Timeout in the Amazon Simple Queue Service Developer Guide.
For example, you have a message with a visibility timeout of 5 minutes. After 3 minutes, you call ChangeMessageVisiblity
with a timeout of 10 minutes. At that time, the timeout for the message is extended by 10 minutes beyond the time of the ChangeMessageVisibility
action. This results in a total visibility timeout of 13 minutes. You can continue to call the ChangeMessageVisibility
to extend the visibility timeout to a maximum of 12 hours. If you try to extend the visibility timeout beyond 12 hours, your request is rejected.
A message is considered to be in flight after it's received from a queue by a consumer, but not yet deleted from the queue.
For standard queues, there can be a maximum of 120,000 inflight messages per queue. If you reach this limit, Amazon SQS returns the OverLimit
error message. To avoid reaching the limit, you should delete messages from the queue after they're processed. You can also increase the number of queues you use to process your messages.
For FIFO queues, there can be a maximum of 20,000 inflight messages per queue. If you reach this limit, Amazon SQS returns no error messages.
If you attempt to set the VisibilityTimeout
to a value greater than the maximum time left, Amazon SQS returns an error. Amazon SQS doesn't automatically recalculate and increase the timeout to the maximum remaining time.
Unlike with a queue, when you change the visibility timeout for a specific message the timeout value is applied immediately but isn't saved in memory for that message. If you don't delete a message after it is received, the visibility timeout for the message reverts to the original timeout value (not to the value you set using the ChangeMessageVisibility
action) the next time the message is received.
Changes the visibility timeout of multiple messages. This is a batch version of ChangeMessageVisibility.
The result of the action on each message is reported individually in the response. You can send up to 10 ChangeMessageVisibility
requests with each ChangeMessageVisibilityBatch
action.
Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200
.
Some actions take lists of parameters. These lists are specified using the param.n
notation. Values of n
are integers starting from 1. For example, a parameter list with two elements looks like this:
&Attribute.1=this
&Attribute.2=that
Creates a new standard or FIFO queue. You can pass one or more attributes in the request. Keep the following caveats in mind:
If you don't specify the FifoQueue
attribute, Amazon SQS creates a standard queue.
You can't change the queue type after you create it and you can't convert an existing standard queue into a FIFO queue. You must either create a new FIFO queue for your application or delete your existing standard queue and recreate it as a FIFO queue. For more information, see Moving From a Standard Queue to a FIFO Queue in the Amazon Simple Queue Service Developer Guide.
If you don't provide a value for an attribute, the queue is created with the default value for the attribute.
If you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.
To successfully create a new queue, you must provide a queue name that adheres to the limits related to queues and is unique within the scope of your queues.
To get the queue URL, use the GetQueueUrl
action. GetQueueUrl
requires only the QueueName
parameter. be aware of existing queue names:
If you provide the name of an existing queue along with the exact names and values of all the queue's attributes, CreateQueue
returns the queue URL for the existing queue.
If the queue name, attribute names, or attribute values don't match an existing queue, CreateQueue
returns an error.
Some actions take lists of parameters. These lists are specified using the param.n
notation. Values of n
are integers starting from 1. For example, a parameter list with two elements looks like this:
&Attribute.1=this
&Attribute.2=that
Deletes the specified message from the specified queue. You specify the message by using the message's receipt handle and not the MessageId you receive when you send the message. Even if the message is locked by another reader due to the visibility timeout setting, it is still deleted from the queue. If you leave a message in the queue for longer than the queue's configured retention period, Amazon SQS automatically deletes the message.
The receipt handle is associated with a specific instance of receiving the message. If you receive a message more than once, the receipt handle you get each time you receive the message is different. If you don't provide the most recently received receipt handle for the message when you use the DeleteMessage
action, the request succeeds, but the message might not be deleted.
For standard queues, it is possible to receive a message even after you delete it. This might happen on rare occasions if one of the servers storing a copy of the message is unavailable when you send the request to delete the message. The copy remains on the server and might be returned to you on a subsequent receive request. You should ensure that your application is idempotent, so that receiving a message more than once does not cause issues.
Deletes up to ten messages from the specified queue. This is a batch version of DeleteMessage.
The result of the action on each message is reported individually in the response.
Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200
.
Some actions take lists of parameters. These lists are specified using the param.n
notation. Values of n
are integers starting from 1. For example, a parameter list with two elements looks like this:
&Attribute.1=this
&Attribute.2=that
Deletes the queue specified by the QueueUrl
, regardless of the queue's contents. If the specified queue doesn't exist, Amazon SQS returns a successful response.
Be careful with the DeleteQueue
action: When you delete a queue, any messages in the queue are no longer available.
When you delete a queue, the deletion process takes up to 60 seconds. Requests you send involving that queue during the 60 seconds might succeed. For example, a SendMessage
request might succeed, but after 60 seconds the queue and the message you sent no longer exist.
When you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.
", "GetQueueAttributes": "Gets attributes for the specified queue.
To determine whether a queue is FIFO, you can check whether QueueName
ends with the .fifo
suffix.
Some actions take lists of parameters. These lists are specified using the param.n
notation. Values of n
are integers starting from 1. For example, a parameter list with two elements looks like this:
&Attribute.1=this
&Attribute.2=that
Returns the URL of an existing queue. This action provides a simple way to retrieve the URL of an Amazon SQS queue.
To access a queue that belongs to another AWS account, use the QueueOwnerAWSAccountId
parameter to specify the account ID of the queue's owner. The queue's owner must grant you permission to access the queue. For more information about shared queue access, see AddPermission
or see Shared Queues in the Amazon Simple Queue Service Developer Guide.
Returns a list of your queues that have the RedrivePolicy
queue attribute configured with a dead-letter queue.
For more information about using dead-letter queues, see Using Amazon SQS Dead-Letter Queues in the Amazon Simple Queue Service Developer Guide.
", "ListQueueTags": "List all cost allocation tags added to the specified Amazon SQS queue. For an overview, see Tagging Amazon SQS Queues in the Amazon Simple Queue Service Developer Guide.
When you use queue tags, keep the following guidelines in mind:
Adding more than 50 tags to a queue isn't recommended.
Tags don't have any semantic meaning. Amazon SQS interprets tags as character strings.
Tags are case-sensitive.
A new tag with a key identical to that of an existing tag overwrites the existing tag.
Tagging API actions are limited to 5 TPS per AWS account. If your application requires a higher throughput, file a technical support request.
For a full list of tag restrictions, see Limits Related to Queues in the Amazon Simple Queue Service Developer Guide.
", "ListQueues": "Returns a list of your queues. The maximum number of queues that can be returned is 1,000. If you specify a value for the optional QueueNamePrefix
parameter, only queues with a name that begins with the specified value are returned.
Deletes the messages in a queue specified by the QueueURL
parameter.
When you use the PurgeQueue
action, you can't retrieve a message deleted from a queue.
When you purge a queue, the message deletion process takes up to 60 seconds. All messages sent to the queue before calling the PurgeQueue
action are deleted. Messages sent to the queue while it is being purged might be deleted. While the queue is being purged, messages sent to the queue before PurgeQueue
is called might be received, but are deleted within the next minute.
Retrieves one or more messages (up to 10), from the specified queue. Using the WaitTimeSeconds
parameter enables long-poll support. For more information, see Amazon SQS Long Polling in the Amazon Simple Queue Service Developer Guide.
Short poll is the default behavior where a weighted random set of machines is sampled on a ReceiveMessage
call. Thus, only the messages on the sampled machines are returned. If the number of messages in the queue is small (fewer than 1,000), you most likely get fewer messages than you requested per ReceiveMessage
call. If the number of messages in the queue is extremely small, you might not receive any messages in a particular ReceiveMessage
response. If this happens, repeat the request.
For each message returned, the response includes the following:
The message body.
An MD5 digest of the message body. For information about MD5, see RFC1321.
The MessageId
you received when you sent the message to the queue.
The receipt handle.
The message attributes.
An MD5 digest of the message attributes.
The receipt handle is the identifier you must provide when deleting the message. For more information, see Queue and Message Identifiers in the Amazon Simple Queue Service Developer Guide.
You can provide the VisibilityTimeout
parameter in your request. The parameter is applied to the messages that Amazon SQS returns in the response. If you don't include the parameter, the overall visibility timeout for the queue is used for the returned messages. For more information, see Visibility Timeout in the Amazon Simple Queue Service Developer Guide.
A message that isn't deleted or a message whose visibility isn't extended before the visibility timeout expires counts as a failed receive. Depending on the configuration of the queue, the message might be sent to the dead-letter queue.
In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
Revokes any permissions in the queue policy that matches the specified Label
parameter. Only the owner of the queue can remove permissions.
Delivers a message to the specified queue.
A message can include only XML, JSON, and unformatted text. The following Unicode characters are allowed:
#x9
| #xA
| #xD
| #x20
to #xD7FF
| #xE000
to #xFFFD
| #x10000
to #x10FFFF
Any characters not included in this list will be rejected. For more information, see the W3C specification for characters.
Delivers up to ten messages to the specified queue. This is a batch version of SendMessage.
For a FIFO queue, multiple messages within a single batch are enqueued in the order they are sent.
The result of sending each message is reported individually in the response. Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200
.
The maximum allowed individual message size and the maximum total payload size (the sum of the individual lengths of all of the batched messages) are both 256 KB (262,144 bytes).
A message can include only XML, JSON, and unformatted text. The following Unicode characters are allowed:
#x9
| #xA
| #xD
| #x20
to #xD7FF
| #xE000
to #xFFFD
| #x10000
to #x10FFFF
Any characters not included in this list will be rejected. For more information, see the W3C specification for characters.
If you don't specify the DelaySeconds
parameter for an entry, Amazon SQS uses the default value for the queue.
Some actions take lists of parameters. These lists are specified using the param.n
notation. Values of n
are integers starting from 1. For example, a parameter list with two elements looks like this:
&Attribute.1=this
&Attribute.2=that
Sets the value of one or more queue attributes. When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the Amazon SQS system. Changes made to the MessageRetentionPeriod
attribute can take up to 15 minutes.
In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
Add cost allocation tags to the specified Amazon SQS queue. For an overview, see Tagging Amazon SQS Queues in the Amazon Simple Queue Service Developer Guide.
When you use queue tags, keep the following guidelines in mind:
Adding more than 50 tags to a queue isn't recommended.
Tags don't have any semantic meaning. Amazon SQS interprets tags as character strings.
Tags are case-sensitive.
A new tag with a key identical to that of an existing tag overwrites the existing tag.
Tagging API actions are limited to 5 TPS per AWS account. If your application requires a higher throughput, file a technical support request.
For a full list of tag restrictions, see Limits Related to Queues in the Amazon Simple Queue Service Developer Guide.
", "UntagQueue": "Remove cost allocation tags from the specified Amazon SQS queue. For an overview, see Tagging Amazon SQS Queues in the Amazon Simple Queue Service Developer Guide.
When you use queue tags, keep the following guidelines in mind:
Adding more than 50 tags to a queue isn't recommended.
Tags don't have any semantic meaning. Amazon SQS interprets tags as character strings.
Tags are case-sensitive.
A new tag with a key identical to that of an existing tag overwrites the existing tag.
Tagging API actions are limited to 5 TPS per AWS account. If your application requires a higher throughput, file a technical support request.
For a full list of tag restrictions, see Limits Related to Queues in the Amazon Simple Queue Service Developer Guide.
" }, "shapes": { "AWSAccountIdList": { "base": null, "refs": { "AddPermissionRequest$AWSAccountIds": "The AWS account number of the principal who is given permission. The principal must have an AWS account, but does not need to be signed up for Amazon SQS. For information about locating the AWS account identification, see Your AWS Identifiers in the Amazon Simple Queue Service Developer Guide.
" } }, "ActionNameList": { "base": null, "refs": { "AddPermissionRequest$Actions": "The action the client wants to allow for the specified principal. The following values are valid:
*
ChangeMessageVisibility
DeleteMessage
GetQueueAttributes
GetQueueUrl
ReceiveMessage
SendMessage
For more information about these actions, see Understanding Permissions in the Amazon Simple Queue Service Developer Guide.
Specifying SendMessage
, DeleteMessage
, or ChangeMessageVisibility
for ActionName.n
also grants permissions for the corresponding batch versions of those actions: SendMessageBatch
, DeleteMessageBatch
, and ChangeMessageVisibilityBatch
.
A list of attributes for which to retrieve information.
In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
The following attributes are supported:
All
- Returns all values.
ApproximateNumberOfMessages
- Returns the approximate number of visible messages in a queue. For more information, see Resources Required to Process Messages in the Amazon Simple Queue Service Developer Guide.
ApproximateNumberOfMessagesDelayed
- Returns the approximate number of messages that are waiting to be added to the queue.
ApproximateNumberOfMessagesNotVisible
- Returns the approximate number of messages that have not timed-out and aren't deleted. For more information, see Resources Required to Process Messages in the Amazon Simple Queue Service Developer Guide.
CreatedTimestamp
- Returns the time when the queue was created in seconds (epoch time).
DelaySeconds
- Returns the default delay on the queue in seconds.
LastModifiedTimestamp
- Returns the time when the queue was last changed in seconds (epoch time).
MaximumMessageSize
- Returns the limit of how many bytes a message can contain before Amazon SQS rejects it.
MessageRetentionPeriod
- Returns the length of time, in seconds, for which Amazon SQS retains a message.
Policy
- Returns the policy of the queue.
QueueArn
- Returns the Amazon resource name (ARN) of the queue.
ReceiveMessageWaitTimeSeconds
- Returns the length of time, in seconds, for which the ReceiveMessage
action waits for a message to arrive.
RedrivePolicy
- Returns the string that includes the parameters for dead-letter queue functionality of the source queue. For more information about the redrive policy and dead-letter queues, see Using Amazon SQS Dead-Letter Queues in the Amazon Simple Queue Service Developer Guide.
deadLetterTargetArn
- The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon SQS moves messages after the value of maxReceiveCount
is exceeded.
maxReceiveCount
- The number of times a message is delivered to the source queue before being moved to the dead-letter queue.
VisibilityTimeout
- Returns the visibility timeout for the queue. For more information about the visibility timeout, see Visibility Timeout in the Amazon Simple Queue Service Developer Guide.
The following attributes apply only to server-side-encryption:
KmsMasterKeyId
- Returns the ID of an AWS-managed customer master key (CMK) for Amazon SQS or a custom CMK. For more information, see Key Terms.
KmsDataKeyReusePeriodSeconds
- Returns the length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling AWS KMS again. For more information, see How Does the Data Key Reuse Period Work?.
The following attributes apply only to FIFO (first-in-first-out) queues:
FifoQueue
- Returns whether the queue is FIFO. For more information, see FIFO Queue Logic in the Amazon Simple Queue Service Developer Guide.
To determine whether a queue is FIFO, you can check whether QueueName
ends with the .fifo
suffix.
ContentBasedDeduplication
- Returns whether content-based deduplication is enabled for the queue. For more information, see Exactly-Once Processing in the Amazon Simple Queue Service Developer Guide.
A list of attributes that need to be returned along with each message. These attributes include:
All
- Returns all values.
ApproximateFirstReceiveTimestamp
- Returns the time the message was first received from the queue (epoch time in milliseconds).
ApproximateReceiveCount
- Returns the number of times a message has been received from the queue but not deleted.
SenderId
For an IAM user, returns the IAM user ID, for example ABCDEFGHI1JKLMNOPQ23R
.
For an IAM role, returns the IAM role ID, for example ABCDE1F2GH3I4JK5LMNOP:i-a123b456
.
SentTimestamp
- Returns the time the message was sent to the queue (epoch time in milliseconds).
MessageDeduplicationId
- Returns the value provided by the sender that calls the SendMessage
action.
MessageGroupId
- Returns the value provided by the sender that calls the SendMessage
action. Messages with the same MessageGroupId
are returned in sequence.
SequenceNumber
- Returns the value provided by Amazon SQS.
Any other valid special request parameters (such as the following) are ignored:
ApproximateNumberOfMessages
ApproximateNumberOfMessagesDelayed
ApproximateNumberOfMessagesNotVisible
CreatedTimestamp
ContentBasedDeduplication
DelaySeconds
FifoQueue
LastModifiedTimestamp
MaximumMessageSize
MessageRetentionPeriod
Policy
QueueArn
,
ReceiveMessageWaitTimeSeconds
RedrivePolicy
VisibilityTimeout
Two or more batch entries in the request have the same Id
.
The length of all the messages put together is more than the limit.
", "refs": { } }, "BatchResultErrorEntry": { "base": "This is used in the responses of batch API to give a detailed description of the result of an action on each entry in the request.
", "refs": { "BatchResultErrorEntryList$member": null } }, "BatchResultErrorEntryList": { "base": null, "refs": { "ChangeMessageVisibilityBatchResult$Failed": "A list of BatchResultErrorEntry
items.
A list of BatchResultErrorEntry
items.
A list of BatchResultErrorEntry
items with error details about each message that can't be enqueued.
Binary type attributes can store any binary data, such as compressed data, encrypted data, or images.
" } }, "BinaryList": { "base": null, "refs": { "MessageAttributeValue$BinaryListValues": "Not implemented. Reserved for future use.
" } }, "Boolean": { "base": null, "refs": { "BatchResultErrorEntry$SenderFault": "Specifies whether the error happened due to the sender's fault.
" } }, "ChangeMessageVisibilityBatchRequest": { "base": "", "refs": { } }, "ChangeMessageVisibilityBatchRequestEntry": { "base": "Encloses a receipt handle and an entry id for each message in ChangeMessageVisibilityBatch.
All of the following list parameters must be prefixed with ChangeMessageVisibilityBatchRequestEntry.n
, where n
is an integer value starting with 1
. For example, a parameter list for this action might look like this:
&ChangeMessageVisibilityBatchRequestEntry.1.Id=change_visibility_msg_2
&ChangeMessageVisibilityBatchRequestEntry.1.ReceiptHandle=<replaceable>Your_Receipt_Handle</replaceable>
&ChangeMessageVisibilityBatchRequestEntry.1.VisibilityTimeout=45
A list of receipt handles of the messages for which the visibility timeout must be changed.
" } }, "ChangeMessageVisibilityBatchResult": { "base": "For each message in the batch, the response contains a ChangeMessageVisibilityBatchResultEntry
tag if the message succeeds or a BatchResultErrorEntry
tag if the message fails.
Encloses the Id
of an entry in ChangeMessageVisibilityBatch.
A list of ChangeMessageVisibilityBatchResultEntry
items.
Returns the QueueUrl
attribute of the created queue.
Encloses a receipt handle and an identifier for it.
", "refs": { "DeleteMessageBatchRequestEntryList$member": null } }, "DeleteMessageBatchRequestEntryList": { "base": null, "refs": { "DeleteMessageBatchRequest$Entries": "A list of receipt handles for the messages to be deleted.
" } }, "DeleteMessageBatchResult": { "base": "For each message in the batch, the response contains a DeleteMessageBatchResultEntry
tag if the message is deleted or a BatchResultErrorEntry
tag if the message can't be deleted.
Encloses the Id
of an entry in DeleteMessageBatch.
A list of DeleteMessageBatchResultEntry
items.
The batch request doesn't contain any entries.
", "refs": { } }, "GetQueueAttributesRequest": { "base": "", "refs": { } }, "GetQueueAttributesResult": { "base": "A list of returned queue attributes.
", "refs": { } }, "GetQueueUrlRequest": { "base": "", "refs": { } }, "GetQueueUrlResult": { "base": "For more information, see Responses in the Amazon Simple Queue Service Developer Guide.
", "refs": { } }, "Integer": { "base": null, "refs": { "ChangeMessageVisibilityBatchRequestEntry$VisibilityTimeout": "The new value (in seconds) for the message's visibility timeout.
", "ChangeMessageVisibilityRequest$VisibilityTimeout": "The new value for the message's visibility timeout (in seconds). Values values: 0
to 43200
. Maximum: 12 hours.
The maximum number of messages to return. Amazon SQS never returns more messages than this value (however, fewer messages might be returned). Valid values are 1 to 10. Default is 1.
", "ReceiveMessageRequest$VisibilityTimeout": "The duration (in seconds) that the received messages are hidden from subsequent retrieve requests after being retrieved by a ReceiveMessage
request.
The duration (in seconds) for which the call waits for a message to arrive in the queue before returning. If a message is available, the call returns sooner than WaitTimeSeconds
. If no messages are available and the wait time expires, the call returns successfully with an empty list of messages.
The length of time, in seconds, for which a specific message is delayed. Valid values: 0 to 900. Maximum: 15 minutes. Messages with a positive DelaySeconds
value become available for processing after the delay period is finished. If you don't specify a value, the default value for the queue is applied.
When you set FifoQueue
, you can't set DelaySeconds
per message. You can set this parameter only on a queue level.
The length of time, in seconds, for which to delay a specific message. Valid values: 0 to 900. Maximum: 15 minutes. Messages with a positive DelaySeconds
value become available for processing after the delay period is finished. If you don't specify a value, the default value for the queue applies.
When you set FifoQueue
, you can't set DelaySeconds
per message. You can set this parameter only on a queue level.
The attribute referred to doesn't exist.
", "refs": { } }, "InvalidBatchEntryId": { "base": "The Id
of a batch entry in a batch request doesn't abide by the specification.
The receipt handle isn't valid for the current version.
", "refs": { } }, "InvalidMessageContents": { "base": "The message contains characters outside the allowed set.
", "refs": { } }, "ListDeadLetterSourceQueuesRequest": { "base": "", "refs": { } }, "ListDeadLetterSourceQueuesResult": { "base": "A list of your dead letter source queues.
", "refs": { } }, "ListQueueTagsRequest": { "base": null, "refs": { } }, "ListQueueTagsResult": { "base": null, "refs": { } }, "ListQueuesRequest": { "base": "", "refs": { } }, "ListQueuesResult": { "base": "A list of your queues.
", "refs": { } }, "Message": { "base": "An Amazon SQS message.
", "refs": { "MessageList$member": null } }, "MessageAttributeName": { "base": null, "refs": { "MessageAttributeNameList$member": null } }, "MessageAttributeNameList": { "base": null, "refs": { "ReceiveMessageRequest$MessageAttributeNames": "The name of the message attribute, where N is the index.
The name can contain alphanumeric characters and the underscore (_
), hyphen (-
), and period (.
).
The name is case-sensitive and must be unique among all attribute names for the message.
The name must not start with AWS-reserved prefixes such as AWS.
or Amazon.
(or any casing variants).
The name must not start or end with a period (.
), and it should not have periods in succession (..
).
The name can be up to 256 characters long.
When using ReceiveMessage
, you can send a list of attribute names to receive, or you can return all of the attributes by specifying All
or .*
in your request. You can also use all message attributes starting with a prefix, for example bar.*
.
The user-specified message attribute value. For string data types, the Value
attribute has the same restrictions on the content as the message body. For more information, see SendMessage.
Name
, type
, value
and the message body must not be empty or null. All parts of the message attribute, including Name
, Type
, and Value
, are part of the message size restriction (256 KB or 262,144 bytes).
Each message attribute consists of a Name
, Type
, and Value
. For more information, see Message Attribute Items and Validation in the Amazon Simple Queue Service Developer Guide.
Each message attribute consists of a Name
, Type
, and Value
. For more information, see Message Attribute Items and Validation in the Amazon Simple Queue Service Developer Guide.
Each message attribute consists of a Name
, Type
, and Value
. For more information, see Message Attribute Items and Validation in the Amazon Simple Queue Service Developer Guide.
A list of messages.
" } }, "MessageNotInflight": { "base": "The message referred to isn't in flight.
", "refs": { } }, "MessageSystemAttributeMap": { "base": null, "refs": { "Message$Attributes": " SenderId
, SentTimestamp
, ApproximateReceiveCount
, and/or ApproximateFirstReceiveTimestamp
. SentTimestamp
and ApproximateFirstReceiveTimestamp
are each returned as an integer representing the epoch time in milliseconds.
The action that you requested would violate a limit. For example, ReceiveMessage
returns this error if the maximum number of inflight messages is reached. AddPermission
returns this error if the maximum number of permissions for the queue is reached.
Indicates that the specified queue previously received a PurgeQueue
request within the last 60 seconds (the time it can take to delete the messages in the queue).
A map of attributes with their corresponding values.
The following lists the names, descriptions, and values of the special request parameters that the CreateQueue
action uses:
DelaySeconds
- The length of time, in seconds, for which the delivery of all messages in the queue is delayed. Valid values: An integer from 0 to 900 seconds (15 minutes). The default is 0 (zero).
MaximumMessageSize
- The limit of how many bytes a message can contain before Amazon SQS rejects it. Valid values: An integer from 1,024 bytes (1 KiB) to 262,144 bytes (256 KiB). The default is 262,144 (256 KiB).
MessageRetentionPeriod
- The length of time, in seconds, for which Amazon SQS retains a message. Valid values: An integer from 60 seconds (1 minute) to 1,209,600 seconds (14 days). The default is 345,600 (4 days).
Policy
- The queue's policy. A valid AWS policy. For more information about policy structure, see Overview of AWS IAM Policies in the Amazon IAM User Guide.
ReceiveMessageWaitTimeSeconds
- The length of time, in seconds, for which a ReceiveMessage
action waits for a message to arrive. Valid values: An integer from 0 to 20 (seconds). The default is 0 (zero).
RedrivePolicy
- The string that includes the parameters for the dead-letter queue functionality of the source queue. For more information about the redrive policy and dead-letter queues, see Using Amazon SQS Dead-Letter Queues in the Amazon Simple Queue Service Developer Guide.
deadLetterTargetArn
- The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon SQS moves messages after the value of maxReceiveCount
is exceeded.
maxReceiveCount
- The number of times a message is delivered to the source queue before being moved to the dead-letter queue.
The dead-letter queue of a FIFO queue must also be a FIFO queue. Similarly, the dead-letter queue of a standard queue must also be a standard queue.
VisibilityTimeout
- The visibility timeout for the queue. Valid values: An integer from 0 to 43,200 (12 hours). The default is 30. For more information about the visibility timeout, see Visibility Timeout in the Amazon Simple Queue Service Developer Guide.
The following attributes apply only to server-side-encryption:
KmsMasterKeyId
- The ID of an AWS-managed customer master key (CMK) for Amazon SQS or a custom CMK. For more information, see Key Terms. While the alias of the AWS-managed CMK for Amazon SQS is always alias/aws/sqs
, the alias of a custom CMK can, for example, be alias/MyAlias
. For more examples, see KeyId in the AWS Key Management Service API Reference.
KmsDataKeyReusePeriodSeconds
- The length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling AWS KMS again. An integer representing seconds, between 60 seconds (1 minute) and 86,400 seconds (24 hours). The default is 300 (5 minutes). A shorter time period provides better security but results in more calls to KMS which might incur charges after Free Tier. For more information, see How Does the Data Key Reuse Period Work?.
The following attributes apply only to FIFO (first-in-first-out) queues:
FifoQueue
- Designates a queue as FIFO. Valid values: true
, false
. You can provide this attribute only during queue creation. You can't change it for an existing queue. When you set this attribute, you must also provide the MessageGroupId
for your messages explicitly.
For more information, see FIFO Queue Logic in the Amazon Simple Queue Service Developer Guide.
ContentBasedDeduplication
- Enables content-based deduplication. Valid values: true
, false
. For more information, see Exactly-Once Processing in the Amazon Simple Queue Service Developer Guide.
Every message must have a unique MessageDeduplicationId
,
You may provide a MessageDeduplicationId
explicitly.
If you aren't able to provide a MessageDeduplicationId
and you enable ContentBasedDeduplication
for your queue, Amazon SQS uses a SHA-256 hash to generate the MessageDeduplicationId
using the body of the message (but not the attributes of the message).
If you don't provide a MessageDeduplicationId
and the queue doesn't have ContentBasedDeduplication
set, the action fails with an error.
If the queue has ContentBasedDeduplication
set, your MessageDeduplicationId
overrides the generated one.
When ContentBasedDeduplication
is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered.
If you send one message with ContentBasedDeduplication
enabled and then another message with a MessageDeduplicationId
that is the same as the one generated for the first MessageDeduplicationId
, the two messages are treated as duplicates and only one copy of the message is delivered.
Any other valid special request parameters (such as the following) are ignored:
ApproximateNumberOfMessages
ApproximateNumberOfMessagesDelayed
ApproximateNumberOfMessagesNotVisible
CreatedTimestamp
LastModifiedTimestamp
QueueArn
A map of attributes to their respective values.
", "SetQueueAttributesRequest$Attributes": "A map of attributes to set.
The following lists the names, descriptions, and values of the special request parameters that the SetQueueAttributes
action uses:
DelaySeconds
- The length of time, in seconds, for which the delivery of all messages in the queue is delayed. Valid values: An integer from 0 to 900 (15 minutes). The default is 0 (zero).
MaximumMessageSize
- The limit of how many bytes a message can contain before Amazon SQS rejects it. Valid values: An integer from 1,024 bytes (1 KiB) up to 262,144 bytes (256 KiB). The default is 262,144 (256 KiB).
MessageRetentionPeriod
- The length of time, in seconds, for which Amazon SQS retains a message. Valid values: An integer representing seconds, from 60 (1 minute) to 1,209,600 (14 days). The default is 345,600 (4 days).
Policy
- The queue's policy. A valid AWS policy. For more information about policy structure, see Overview of AWS IAM Policies in the Amazon IAM User Guide.
ReceiveMessageWaitTimeSeconds
- The length of time, in seconds, for which a ReceiveMessage
action waits for a message to arrive. Valid values: an integer from 0 to 20 (seconds). The default is 0.
RedrivePolicy
- The string that includes the parameters for the dead-letter queue functionality of the source queue. For more information about the redrive policy and dead-letter queues, see Using Amazon SQS Dead-Letter Queues in the Amazon Simple Queue Service Developer Guide.
deadLetterTargetArn
- The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon SQS moves messages after the value of maxReceiveCount
is exceeded.
maxReceiveCount
- The number of times a message is delivered to the source queue before being moved to the dead-letter queue.
The dead-letter queue of a FIFO queue must also be a FIFO queue. Similarly, the dead-letter queue of a standard queue must also be a standard queue.
VisibilityTimeout
- The visibility timeout for the queue. Valid values: an integer from 0 to 43,200 (12 hours). The default is 30. For more information about the visibility timeout, see Visibility Timeout in the Amazon Simple Queue Service Developer Guide.
The following attributes apply only to server-side-encryption:
KmsMasterKeyId
- The ID of an AWS-managed customer master key (CMK) for Amazon SQS or a custom CMK. For more information, see Key Terms. While the alias of the AWS-managed CMK for Amazon SQS is always alias/aws/sqs
, the alias of a custom CMK can, for example, be alias/MyAlias
. For more examples, see KeyId in the AWS Key Management Service API Reference.
KmsDataKeyReusePeriodSeconds
- The length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling AWS KMS again. An integer representing seconds, between 60 seconds (1 minute) and 86,400 seconds (24 hours). The default is 300 (5 minutes). A shorter time period provides better security but results in more calls to KMS which might incur charges after Free Tier. For more information, see How Does the Data Key Reuse Period Work?.
The following attribute applies only to FIFO (first-in-first-out) queues:
ContentBasedDeduplication
- Enables content-based deduplication. For more information, see Exactly-Once Processing in the Amazon Simple Queue Service Developer Guide.
Every message must have a unique MessageDeduplicationId
,
You may provide a MessageDeduplicationId
explicitly.
If you aren't able to provide a MessageDeduplicationId
and you enable ContentBasedDeduplication
for your queue, Amazon SQS uses a SHA-256 hash to generate the MessageDeduplicationId
using the body of the message (but not the attributes of the message).
If you don't provide a MessageDeduplicationId
and the queue doesn't have ContentBasedDeduplication
set, the action fails with an error.
If the queue has ContentBasedDeduplication
set, your MessageDeduplicationId
overrides the generated one.
When ContentBasedDeduplication
is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered.
If you send one message with ContentBasedDeduplication
enabled and then another message with a MessageDeduplicationId
that is the same as the one generated for the first MessageDeduplicationId
, the two messages are treated as duplicates and only one copy of the message is delivered.
Any other valid special request parameters (such as the following) are ignored:
ApproximateNumberOfMessages
ApproximateNumberOfMessagesDelayed
ApproximateNumberOfMessagesNotVisible
CreatedTimestamp
LastModifiedTimestamp
QueueArn
You must wait 60 seconds after deleting a queue before you can create another one with the same name.
", "refs": { } }, "QueueDoesNotExist": { "base": "The queue referred to doesn't exist.
", "refs": { } }, "QueueNameExists": { "base": "A queue already exists with this name. Amazon SQS returns this error only if the request includes attributes whose values differ from those of the existing queue.
", "refs": { } }, "QueueUrlList": { "base": null, "refs": { "ListDeadLetterSourceQueuesResult$queueUrls": "A list of source queue URLs that have the RedrivePolicy
queue attribute configured with a dead-letter queue.
A list of queue URLs, up to 1,000 entries.
" } }, "ReceiptHandleIsInvalid": { "base": "The receipt handle provided isn't valid.
", "refs": { } }, "ReceiveMessageRequest": { "base": "", "refs": { } }, "ReceiveMessageResult": { "base": "A list of received messages.
", "refs": { } }, "RemovePermissionRequest": { "base": "", "refs": { } }, "SendMessageBatchRequest": { "base": "", "refs": { } }, "SendMessageBatchRequestEntry": { "base": "Contains the details of a single Amazon SQS message along with an Id
.
A list of SendMessageBatchRequestEntry
items.
For each message in the batch, the response contains a SendMessageBatchResultEntry
tag if the message succeeds or a BatchResultErrorEntry
tag if the message fails.
Encloses a MessageId
for a successfully-enqueued message in a SendMessageBatch.
A list of SendMessageBatchResultEntry
items.
The MD5OfMessageBody
and MessageId
elements.
The URL of the Amazon SQS queue to which permissions are added.
Queue URLs are case-sensitive.
", "AddPermissionRequest$Label": "The unique identification of the permission you're setting (for example, AliceSendMessage
). Maximum 80 characters. Allowed characters include alphanumeric characters, hyphens (-
), and underscores (_
).
The Id
of an entry in a batch request.
An error code representing why the action failed on this entry.
", "BatchResultErrorEntry$Message": "A message explaining why the action failed on this entry.
", "ChangeMessageVisibilityBatchRequest$QueueUrl": "The URL of the Amazon SQS queue whose messages' visibility is changed.
Queue URLs are case-sensitive.
", "ChangeMessageVisibilityBatchRequestEntry$Id": "An identifier for this particular receipt handle used to communicate the result.
The Id
s of a batch request need to be unique within a request
A receipt handle.
", "ChangeMessageVisibilityBatchResultEntry$Id": "Represents a message whose visibility timeout has been changed successfully.
", "ChangeMessageVisibilityRequest$QueueUrl": "The URL of the Amazon SQS queue whose message's visibility is changed.
Queue URLs are case-sensitive.
", "ChangeMessageVisibilityRequest$ReceiptHandle": "The receipt handle associated with the message whose visibility timeout is changed. This parameter is returned by the ReceiveMessage
action.
The name of the new queue. The following limits apply to this name:
A queue name can have up to 80 characters.
Valid values: alphanumeric characters, hyphens (-
), and underscores (_
).
A FIFO queue name must end with the .fifo
suffix.
Queue names are case-sensitive.
", "CreateQueueResult$QueueUrl": "The URL of the created Amazon SQS queue.
", "DeleteMessageBatchRequest$QueueUrl": "The URL of the Amazon SQS queue from which messages are deleted.
Queue URLs are case-sensitive.
", "DeleteMessageBatchRequestEntry$Id": "An identifier for this particular receipt handle. This is used to communicate the result.
The Id
s of a batch request need to be unique within a request
A receipt handle.
", "DeleteMessageBatchResultEntry$Id": "Represents a successfully deleted message.
", "DeleteMessageRequest$QueueUrl": "The URL of the Amazon SQS queue from which messages are deleted.
Queue URLs are case-sensitive.
", "DeleteMessageRequest$ReceiptHandle": "The receipt handle associated with the message to delete.
", "DeleteQueueRequest$QueueUrl": "The URL of the Amazon SQS queue to delete.
Queue URLs are case-sensitive.
", "GetQueueAttributesRequest$QueueUrl": "The URL of the Amazon SQS queue whose attribute information is retrieved.
Queue URLs are case-sensitive.
", "GetQueueUrlRequest$QueueName": "The name of the queue whose URL must be fetched. Maximum 80 characters. Valid values: alphanumeric characters, hyphens (-
), and underscores (_
).
Queue names are case-sensitive.
", "GetQueueUrlRequest$QueueOwnerAWSAccountId": "The AWS account ID of the account that created the queue.
", "GetQueueUrlResult$QueueUrl": "The URL of the queue.
", "ListDeadLetterSourceQueuesRequest$QueueUrl": "The URL of a dead-letter queue.
Queue URLs are case-sensitive.
", "ListQueueTagsRequest$QueueUrl": "The URL of the queue.
", "ListQueuesRequest$QueueNamePrefix": "A string to use for filtering the list results. Only those queues whose name begins with the specified string are returned.
Queue names are case-sensitive.
", "Message$MessageId": "A unique identifier for the message. A MessageId
is considered unique across all AWS accounts for an extended period of time.
An identifier associated with the act of receiving the message. A new receipt handle is returned every time you receive a message. When deleting a message, you provide the last received receipt handle to delete the message.
", "Message$MD5OfBody": "An MD5 digest of the non-URL-encoded message body string.
", "Message$Body": "The message's contents (not URL-encoded).
", "Message$MD5OfMessageAttributes": "An MD5 digest of the non-URL-encoded message attribute string. You can use this attribute to verify that Amazon SQS received the message correctly. Amazon SQS URL-decodes the message before creating the MD5 digest. For information about MD5, see RFC1321.
", "MessageAttributeValue$StringValue": "Strings are Unicode with UTF-8 binary encoding. For a list of code values, see ASCII Printable Characters.
", "MessageAttributeValue$DataType": "Amazon SQS supports the following logical data types: String
, Number
, and Binary
. For the Number
data type, you must use StringValue
.
You can also append custom labels. For more information, see Message Attribute Data Types and Validation in the Amazon Simple Queue Service Developer Guide.
", "MessageBodyAttributeMap$key": null, "MessageSystemAttributeMap$value": null, "PurgeQueueRequest$QueueUrl": "The URL of the queue from which the PurgeQueue
action deletes messages.
Queue URLs are case-sensitive.
", "QueueAttributeMap$value": null, "QueueUrlList$member": null, "ReceiveMessageRequest$QueueUrl": "The URL of the Amazon SQS queue from which messages are received.
Queue URLs are case-sensitive.
", "ReceiveMessageRequest$ReceiveRequestAttemptId": "This parameter applies only to FIFO (first-in-first-out) queues.
The token used for deduplication of ReceiveMessage
calls. If a networking issue occurs after a ReceiveMessage
action, and instead of a response you receive a generic error, you can retry the same action with an identical ReceiveRequestAttemptId
to retrieve the same set of messages, even if their visibility timeout has not yet expired.
You can use ReceiveRequestAttemptId
only for 5 minutes after a ReceiveMessage
action.
When you set FifoQueue
, a caller of the ReceiveMessage
action can provide a ReceiveRequestAttemptId
explicitly.
If a caller of the ReceiveMessage
action doesn't provide a ReceiveRequestAttemptId
, Amazon SQS generates a ReceiveRequestAttemptId
.
You can retry the ReceiveMessage
action with the same ReceiveRequestAttemptId
if none of the messages have been modified (deleted or had their visibility changes).
During a visibility timeout, subsequent calls with the same ReceiveRequestAttemptId
return the same messages and receipt handles. If a retry occurs within the deduplication interval, it resets the visibility timeout. For more information, see Visibility Timeout in the Amazon Simple Queue Service Developer Guide.
If a caller of the ReceiveMessage
action is still processing messages when the visibility timeout expires and messages become visible, another worker reading from the same queue can receive the same messages and therefore process duplicates. Also, if a reader whose message processing time is longer than the visibility timeout tries to delete the processed messages, the action fails with an error.
To mitigate this effect, ensure that your application observes a safe threshold before the visibility timeout expires and extend the visibility timeout as necessary.
While messages with a particular MessageGroupId
are invisible, no more messages belonging to the same MessageGroupId
are returned until the visibility timeout expires. You can still receive messages with another MessageGroupId
as long as it is also visible.
If a caller of ReceiveMessage
can't track the ReceiveRequestAttemptId
, no retries work until the original visibility timeout expires. As a result, delays might occur but the messages in the queue remain in a strict order.
The length of ReceiveRequestAttemptId
is 128 characters. ReceiveRequestAttemptId
can contain alphanumeric characters (a-z
, A-Z
, 0-9
) and punctuation (!\"#$%&'()*+,-./:;<=>?@[\\]^_`{|}~
).
For best practices of using ReceiveRequestAttemptId
, see Using the ReceiveRequestAttemptId Request Parameter in the Amazon Simple Queue Service Developer Guide.
The URL of the Amazon SQS queue from which permissions are removed.
Queue URLs are case-sensitive.
", "RemovePermissionRequest$Label": "The identification of the permission to remove. This is the label added using the AddPermission
action.
The URL of the Amazon SQS queue to which batched messages are sent.
Queue URLs are case-sensitive.
", "SendMessageBatchRequestEntry$Id": "An identifier for a message in this batch used to communicate the result.
The Id
s of a batch request need to be unique within a request
The body of the message.
", "SendMessageBatchRequestEntry$MessageDeduplicationId": "This parameter applies only to FIFO (first-in-first-out) queues.
The token used for deduplication of messages within a 5-minute minimum deduplication interval. If a message with a particular MessageDeduplicationId
is sent successfully, subsequent messages with the same MessageDeduplicationId
are accepted successfully but aren't delivered. For more information, see Exactly-Once Processing in the Amazon Simple Queue Service Developer Guide.
Every message must have a unique MessageDeduplicationId
,
You may provide a MessageDeduplicationId
explicitly.
If you aren't able to provide a MessageDeduplicationId
and you enable ContentBasedDeduplication
for your queue, Amazon SQS uses a SHA-256 hash to generate the MessageDeduplicationId
using the body of the message (but not the attributes of the message).
If you don't provide a MessageDeduplicationId
and the queue doesn't have ContentBasedDeduplication
set, the action fails with an error.
If the queue has ContentBasedDeduplication
set, your MessageDeduplicationId
overrides the generated one.
When ContentBasedDeduplication
is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered.
If you send one message with ContentBasedDeduplication
enabled and then another message with a MessageDeduplicationId
that is the same as the one generated for the first MessageDeduplicationId
, the two messages are treated as duplicates and only one copy of the message is delivered.
The MessageDeduplicationId
is available to the recipient of the message (this can be useful for troubleshooting delivery issues).
If a message is sent successfully but the acknowledgement is lost and the message is resent with the same MessageDeduplicationId
after the deduplication interval, Amazon SQS can't detect duplicate messages.
The length of MessageDeduplicationId
is 128 characters. MessageDeduplicationId
can contain alphanumeric characters (a-z
, A-Z
, 0-9
) and punctuation (!\"#$%&'()*+,-./:;<=>?@[\\]^_`{|}~
).
For best practices of using MessageDeduplicationId
, see Using the MessageDeduplicationId Property in the Amazon Simple Queue Service Developer Guide.
This parameter applies only to FIFO (first-in-first-out) queues.
The tag that specifies that a message belongs to a specific message group. Messages that belong to the same message group are processed in a FIFO manner (however, messages in different message groups might be processed out of order). To interleave multiple ordered streams within a single queue, use MessageGroupId
values (for example, session data for multiple users). In this scenario, multiple readers can process the queue, but the session data of each user is processed in a FIFO fashion.
You must associate a non-empty MessageGroupId
with a message. If you don't provide a MessageGroupId
, the action fails.
ReceiveMessage
might return messages with multiple MessageGroupId
values. For each MessageGroupId
, the messages are sorted by time sent. The caller can't specify a MessageGroupId
.
The length of MessageGroupId
is 128 characters. Valid values are alphanumeric characters and punctuation (!\"#$%&'()*+,-./:;<=>?@[\\]^_`{|}~)
.
For best practices of using MessageGroupId
, see Using the MessageGroupId Property in the Amazon Simple Queue Service Developer Guide.
MessageGroupId
is required for FIFO queues. You can't use it for Standard queues.
An identifier for the message in this batch.
", "SendMessageBatchResultEntry$MessageId": "An identifier for the message.
", "SendMessageBatchResultEntry$MD5OfMessageBody": "An MD5 digest of the non-URL-encoded message attribute string. You can use this attribute to verify that Amazon SQS received the message correctly. Amazon SQS URL-decodes the message before creating the MD5 digest. For information about MD5, see RFC1321.
", "SendMessageBatchResultEntry$MD5OfMessageAttributes": "An MD5 digest of the non-URL-encoded message attribute string. You can use this attribute to verify that Amazon SQS received the message correctly. Amazon SQS URL-decodes the message before creating the MD5 digest. For information about MD5, see RFC1321.
", "SendMessageBatchResultEntry$SequenceNumber": "This parameter applies only to FIFO (first-in-first-out) queues.
The large, non-consecutive number that Amazon SQS assigns to each message.
The length of SequenceNumber
is 128 bits. As SequenceNumber
continues to increase for a particular MessageGroupId
.
The URL of the Amazon SQS queue to which a message is sent.
Queue URLs are case-sensitive.
", "SendMessageRequest$MessageBody": "The message to send. The maximum string size is 256 KB.
A message can include only XML, JSON, and unformatted text. The following Unicode characters are allowed:
#x9
| #xA
| #xD
| #x20
to #xD7FF
| #xE000
to #xFFFD
| #x10000
to #x10FFFF
Any characters not included in this list will be rejected. For more information, see the W3C specification for characters.
This parameter applies only to FIFO (first-in-first-out) queues.
The token used for deduplication of sent messages. If a message with a particular MessageDeduplicationId
is sent successfully, any messages sent with the same MessageDeduplicationId
are accepted successfully but aren't delivered during the 5-minute deduplication interval. For more information, see Exactly-Once Processing in the Amazon Simple Queue Service Developer Guide.
Every message must have a unique MessageDeduplicationId
,
You may provide a MessageDeduplicationId
explicitly.
If you aren't able to provide a MessageDeduplicationId
and you enable ContentBasedDeduplication
for your queue, Amazon SQS uses a SHA-256 hash to generate the MessageDeduplicationId
using the body of the message (but not the attributes of the message).
If you don't provide a MessageDeduplicationId
and the queue doesn't have ContentBasedDeduplication
set, the action fails with an error.
If the queue has ContentBasedDeduplication
set, your MessageDeduplicationId
overrides the generated one.
When ContentBasedDeduplication
is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered.
If you send one message with ContentBasedDeduplication
enabled and then another message with a MessageDeduplicationId
that is the same as the one generated for the first MessageDeduplicationId
, the two messages are treated as duplicates and only one copy of the message is delivered.
The MessageDeduplicationId
is available to the recipient of the message (this can be useful for troubleshooting delivery issues).
If a message is sent successfully but the acknowledgement is lost and the message is resent with the same MessageDeduplicationId
after the deduplication interval, Amazon SQS can't detect duplicate messages.
The length of MessageDeduplicationId
is 128 characters. MessageDeduplicationId
can contain alphanumeric characters (a-z
, A-Z
, 0-9
) and punctuation (!\"#$%&'()*+,-./:;<=>?@[\\]^_`{|}~
).
For best practices of using MessageDeduplicationId
, see Using the MessageDeduplicationId Property in the Amazon Simple Queue Service Developer Guide.
This parameter applies only to FIFO (first-in-first-out) queues.
The tag that specifies that a message belongs to a specific message group. Messages that belong to the same message group are processed in a FIFO manner (however, messages in different message groups might be processed out of order). To interleave multiple ordered streams within a single queue, use MessageGroupId
values (for example, session data for multiple users). In this scenario, multiple readers can process the queue, but the session data of each user is processed in a FIFO fashion.
You must associate a non-empty MessageGroupId
with a message. If you don't provide a MessageGroupId
, the action fails.
ReceiveMessage
might return messages with multiple MessageGroupId
values. For each MessageGroupId
, the messages are sorted by time sent. The caller can't specify a MessageGroupId
.
The length of MessageGroupId
is 128 characters. Valid values are alphanumeric characters and punctuation (!\"#$%&'()*+,-./:;<=>?@[\\]^_`{|}~)
.
For best practices of using MessageGroupId
, see Using the MessageGroupId Property in the Amazon Simple Queue Service Developer Guide.
MessageGroupId
is required for FIFO queues. You can't use it for Standard queues.
An MD5 digest of the non-URL-encoded message attribute string. You can use this attribute to verify that Amazon SQS received the message correctly. Amazon SQS URL-decodes the message before creating the MD5 digest. For information about MD5, see RFC1321.
", "SendMessageResult$MD5OfMessageAttributes": "An MD5 digest of the non-URL-encoded message attribute string. You can use this attribute to verify that Amazon SQS received the message correctly. Amazon SQS URL-decodes the message before creating the MD5 digest. For information about MD5, see RFC1321.
", "SendMessageResult$MessageId": "An attribute containing the MessageId
of the message sent to the queue. For more information, see Queue and Message Identifiers in the Amazon Simple Queue Service Developer Guide.
This parameter applies only to FIFO (first-in-first-out) queues.
The large, non-consecutive number that Amazon SQS assigns to each message.
The length of SequenceNumber
is 128 bits. SequenceNumber
continues to increase for a particular MessageGroupId
.
The URL of the Amazon SQS queue whose attributes are set.
Queue URLs are case-sensitive.
", "StringList$member": null, "TagQueueRequest$QueueUrl": "The URL of the queue.
", "UntagQueueRequest$QueueUrl": "The URL of the queue.
" } }, "StringList": { "base": null, "refs": { "MessageAttributeValue$StringListValues": "Not implemented. Reserved for future use.
" } }, "TagKey": { "base": null, "refs": { "TagKeyList$member": null, "TagMap$key": null } }, "TagKeyList": { "base": null, "refs": { "UntagQueueRequest$TagKeys": "The list of tags to be removed from the specified queue.
" } }, "TagMap": { "base": null, "refs": { "ListQueueTagsResult$Tags": "The list of all tags added to the specified queue.
", "TagQueueRequest$Tags": "The list of tags to be added to the specified queue.
" } }, "TagQueueRequest": { "base": null, "refs": { } }, "TagValue": { "base": null, "refs": { "TagMap$value": null } }, "TooManyEntriesInBatchRequest": { "base": "The batch request contains more entries than permissible.
", "refs": { } }, "UnsupportedOperation": { "base": "Error code 400. Unsupported operation.
", "refs": { } }, "UntagQueueRequest": { "base": null, "refs": { } } } }