route/vendor/github.com/klauspost/reedsolomon/streaming.go

576 lines
15 KiB
Go

/**
* Reed-Solomon Coding over 8-bit values.
*
* Copyright 2015, Klaus Post
* Copyright 2015, Backblaze, Inc.
*/
package reedsolomon
import (
"bytes"
"errors"
"fmt"
"io"
"sync"
)
// StreamEncoder is an interface to encode Reed-Salomon parity sets for your data.
// It provides a fully streaming interface, and processes data in blocks of up to 4MB.
//
// For small shard sizes, 10MB and below, it is recommended to use the in-memory interface,
// since the streaming interface has a start up overhead.
//
// For all operations, no readers and writers should not assume any order/size of
// individual reads/writes.
//
// For usage examples, see "stream-encoder.go" and "streamdecoder.go" in the examples
// folder.
type StreamEncoder interface {
// Encodes parity shards for a set of data shards.
//
// Input is 'shards' containing readers for data shards followed by parity shards
// io.Writer.
//
// The number of shards must match the number given to NewStream().
//
// Each reader must supply the same number of bytes.
//
// The parity shards will be written to the writer.
// The number of bytes written will match the input size.
//
// If a data stream returns an error, a StreamReadError type error
// will be returned. If a parity writer returns an error, a
// StreamWriteError will be returned.
Encode(data []io.Reader, parity []io.Writer) error
// Verify returns true if the parity shards contain correct data.
//
// The number of shards must match the number total data+parity shards
// given to NewStream().
//
// Each reader must supply the same number of bytes.
// If a shard stream returns an error, a StreamReadError type error
// will be returned.
Verify(shards []io.Reader) (bool, error)
// Reconstruct will recreate the missing shards if possible.
//
// Given a list of valid shards (to read) and invalid shards (to write)
//
// You indicate that a shard is missing by setting it to nil in the 'valid'
// slice and at the same time setting a non-nil writer in "fill".
// An index cannot contain both non-nil 'valid' and 'fill' entry.
// If both are provided 'ErrReconstructMismatch' is returned.
//
// If there are too few shards to reconstruct the missing
// ones, ErrTooFewShards will be returned.
//
// The reconstructed shard set is complete, but integrity is not verified.
// Use the Verify function to check if data set is ok.
Reconstruct(valid []io.Reader, fill []io.Writer) error
// Split a an input stream into the number of shards given to the encoder.
//
// The data will be split into equally sized shards.
// If the data size isn't dividable by the number of shards,
// the last shard will contain extra zeros.
//
// You must supply the total size of your input.
// 'ErrShortData' will be returned if it is unable to retrieve the
// number of bytes indicated.
Split(data io.Reader, dst []io.Writer, size int64) (err error)
// Join the shards and write the data segment to dst.
//
// Only the data shards are considered.
//
// You must supply the exact output size you want.
// If there are to few shards given, ErrTooFewShards will be returned.
// If the total data size is less than outSize, ErrShortData will be returned.
Join(dst io.Writer, shards []io.Reader, outSize int64) error
}
// StreamReadError is returned when a read error is encountered
// that relates to a supplied stream.
// This will allow you to find out which reader has failed.
type StreamReadError struct {
Err error // The error
Stream int // The stream number on which the error occurred
}
// Error returns the error as a string
func (s StreamReadError) Error() string {
return fmt.Sprintf("error reading stream %d: %s", s.Stream, s.Err)
}
// String returns the error as a string
func (s StreamReadError) String() string {
return s.Error()
}
// StreamWriteError is returned when a write error is encountered
// that relates to a supplied stream. This will allow you to
// find out which reader has failed.
type StreamWriteError struct {
Err error // The error
Stream int // The stream number on which the error occurred
}
// Error returns the error as a string
func (s StreamWriteError) Error() string {
return fmt.Sprintf("error writing stream %d: %s", s.Stream, s.Err)
}
// String returns the error as a string
func (s StreamWriteError) String() string {
return s.Error()
}
// rsStream contains a matrix for a specific
// distribution of datashards and parity shards.
// Construct if using NewStream()
type rsStream struct {
r *reedSolomon
bs int // Block size
// Shard reader
readShards func(dst [][]byte, in []io.Reader) error
// Shard writer
writeShards func(out []io.Writer, in [][]byte) error
creads bool
cwrites bool
}
// NewStream creates a new encoder and initializes it to
// the number of data shards and parity shards that
// you want to use. You can reuse this encoder.
// Note that the maximum number of data shards is 256.
func NewStream(dataShards, parityShards int, o ...Option) (StreamEncoder, error) {
enc, err := New(dataShards, parityShards, o...)
if err != nil {
return nil, err
}
rs := enc.(*reedSolomon)
r := rsStream{r: rs, bs: 4 << 20}
r.readShards = readShards
r.writeShards = writeShards
return &r, err
}
// NewStreamC creates a new encoder and initializes it to
// the number of data shards and parity shards given.
//
// This functions as 'NewStream', but allows you to enable CONCURRENT reads and writes.
func NewStreamC(dataShards, parityShards int, conReads, conWrites bool, o ...Option) (StreamEncoder, error) {
enc, err := New(dataShards, parityShards, o...)
if err != nil {
return nil, err
}
rs := enc.(*reedSolomon)
r := rsStream{r: rs, bs: 4 << 20}
r.readShards = readShards
r.writeShards = writeShards
if conReads {
r.readShards = cReadShards
}
if conWrites {
r.writeShards = cWriteShards
}
return &r, err
}
func createSlice(n, length int) [][]byte {
out := make([][]byte, n)
for i := range out {
out[i] = make([]byte, length)
}
return out
}
// Encodes parity shards for a set of data shards.
//
// Input is 'shards' containing readers for data shards followed by parity shards
// io.Writer.
//
// The number of shards must match the number given to NewStream().
//
// Each reader must supply the same number of bytes.
//
// The parity shards will be written to the writer.
// The number of bytes written will match the input size.
//
// If a data stream returns an error, a StreamReadError type error
// will be returned. If a parity writer returns an error, a
// StreamWriteError will be returned.
func (r rsStream) Encode(data []io.Reader, parity []io.Writer) error {
if len(data) != r.r.DataShards {
return ErrTooFewShards
}
if len(parity) != r.r.ParityShards {
return ErrTooFewShards
}
all := createSlice(r.r.Shards, r.bs)
in := all[:r.r.DataShards]
out := all[r.r.DataShards:]
read := 0
for {
err := r.readShards(in, data)
switch err {
case nil:
case io.EOF:
if read == 0 {
return ErrShardNoData
}
return nil
default:
return err
}
out = trimShards(out, shardSize(in))
read += shardSize(in)
err = r.r.Encode(all)
if err != nil {
return err
}
err = r.writeShards(parity, out)
if err != nil {
return err
}
}
}
// Trim the shards so they are all the same size
func trimShards(in [][]byte, size int) [][]byte {
for i := range in {
if in[i] != nil {
in[i] = in[i][0:size]
}
if len(in[i]) < size {
in[i] = nil
}
}
return in
}
func readShards(dst [][]byte, in []io.Reader) error {
if len(in) != len(dst) {
panic("internal error: in and dst size does not match")
}
size := -1
for i := range in {
if in[i] == nil {
dst[i] = nil
continue
}
n, err := io.ReadFull(in[i], dst[i])
// The error is EOF only if no bytes were read.
// If an EOF happens after reading some but not all the bytes,
// ReadFull returns ErrUnexpectedEOF.
switch err {
case io.ErrUnexpectedEOF, io.EOF:
if size < 0 {
size = n
} else if n != size {
// Shard sizes must match.
return ErrShardSize
}
dst[i] = dst[i][0:n]
case nil:
continue
default:
return StreamReadError{Err: err, Stream: i}
}
}
if size == 0 {
return io.EOF
}
return nil
}
func writeShards(out []io.Writer, in [][]byte) error {
if len(out) != len(in) {
panic("internal error: in and out size does not match")
}
for i := range in {
if out[i] == nil {
continue
}
n, err := out[i].Write(in[i])
if err != nil {
return StreamWriteError{Err: err, Stream: i}
}
//
if n != len(in[i]) {
return StreamWriteError{Err: io.ErrShortWrite, Stream: i}
}
}
return nil
}
type readResult struct {
n int
size int
err error
}
// cReadShards reads shards concurrently
func cReadShards(dst [][]byte, in []io.Reader) error {
if len(in) != len(dst) {
panic("internal error: in and dst size does not match")
}
var wg sync.WaitGroup
wg.Add(len(in))
res := make(chan readResult, len(in))
for i := range in {
if in[i] == nil {
dst[i] = nil
wg.Done()
continue
}
go func(i int) {
defer wg.Done()
n, err := io.ReadFull(in[i], dst[i])
// The error is EOF only if no bytes were read.
// If an EOF happens after reading some but not all the bytes,
// ReadFull returns ErrUnexpectedEOF.
res <- readResult{size: n, err: err, n: i}
}(i)
}
wg.Wait()
close(res)
size := -1
for r := range res {
switch r.err {
case io.ErrUnexpectedEOF, io.EOF:
if size < 0 {
size = r.size
} else if r.size != size {
// Shard sizes must match.
return ErrShardSize
}
dst[r.n] = dst[r.n][0:r.size]
case nil:
default:
return StreamReadError{Err: r.err, Stream: r.n}
}
}
if size == 0 {
return io.EOF
}
return nil
}
// cWriteShards writes shards concurrently
func cWriteShards(out []io.Writer, in [][]byte) error {
if len(out) != len(in) {
panic("internal error: in and out size does not match")
}
var errs = make(chan error, len(out))
var wg sync.WaitGroup
wg.Add(len(out))
for i := range in {
go func(i int) {
defer wg.Done()
if out[i] == nil {
errs <- nil
return
}
n, err := out[i].Write(in[i])
if err != nil {
errs <- StreamWriteError{Err: err, Stream: i}
return
}
if n != len(in[i]) {
errs <- StreamWriteError{Err: io.ErrShortWrite, Stream: i}
}
}(i)
}
wg.Wait()
close(errs)
for err := range errs {
if err != nil {
return err
}
}
return nil
}
// Verify returns true if the parity shards contain correct data.
//
// The number of shards must match the number total data+parity shards
// given to NewStream().
//
// Each reader must supply the same number of bytes.
// If a shard stream returns an error, a StreamReadError type error
// will be returned.
func (r rsStream) Verify(shards []io.Reader) (bool, error) {
if len(shards) != r.r.Shards {
return false, ErrTooFewShards
}
read := 0
all := createSlice(r.r.Shards, r.bs)
for {
err := r.readShards(all, shards)
if err == io.EOF {
if read == 0 {
return false, ErrShardNoData
}
return true, nil
}
if err != nil {
return false, err
}
read += shardSize(all)
ok, err := r.r.Verify(all)
if !ok || err != nil {
return ok, err
}
}
}
// ErrReconstructMismatch is returned by the StreamEncoder, if you supply
// "valid" and "fill" streams on the same index.
// Therefore it is impossible to see if you consider the shard valid
// or would like to have it reconstructed.
var ErrReconstructMismatch = errors.New("valid shards and fill shards are mutually exclusive")
// Reconstruct will recreate the missing shards if possible.
//
// Given a list of valid shards (to read) and invalid shards (to write)
//
// You indicate that a shard is missing by setting it to nil in the 'valid'
// slice and at the same time setting a non-nil writer in "fill".
// An index cannot contain both non-nil 'valid' and 'fill' entry.
//
// If there are too few shards to reconstruct the missing
// ones, ErrTooFewShards will be returned.
//
// The reconstructed shard set is complete, but integrity is not verified.
// Use the Verify function to check if data set is ok.
func (r rsStream) Reconstruct(valid []io.Reader, fill []io.Writer) error {
if len(valid) != r.r.Shards {
return ErrTooFewShards
}
if len(fill) != r.r.Shards {
return ErrTooFewShards
}
all := createSlice(r.r.Shards, r.bs)
for i := range valid {
if valid[i] != nil && fill[i] != nil {
return ErrReconstructMismatch
}
}
read := 0
for {
err := r.readShards(all, valid)
if err == io.EOF {
if read == 0 {
return ErrShardNoData
}
return nil
}
if err != nil {
return err
}
read += shardSize(all)
all = trimShards(all, shardSize(all))
err = r.r.Reconstruct(all)
if err != nil {
return err
}
err = r.writeShards(fill, all)
if err != nil {
return err
}
}
}
// Join the shards and write the data segment to dst.
//
// Only the data shards are considered.
//
// You must supply the exact output size you want.
// If there are to few shards given, ErrTooFewShards will be returned.
// If the total data size is less than outSize, ErrShortData will be returned.
func (r rsStream) Join(dst io.Writer, shards []io.Reader, outSize int64) error {
// Do we have enough shards?
if len(shards) < r.r.DataShards {
return ErrTooFewShards
}
// Trim off parity shards if any
shards = shards[:r.r.DataShards]
for i := range shards {
if shards[i] == nil {
return StreamReadError{Err: ErrShardNoData, Stream: i}
}
}
// Join all shards
src := io.MultiReader(shards...)
// Copy data to dst
n, err := io.CopyN(dst, src, outSize)
if err == io.EOF {
return ErrShortData
}
if err != nil {
return err
}
if n != outSize {
return ErrShortData
}
return nil
}
// Split a an input stream into the number of shards given to the encoder.
//
// The data will be split into equally sized shards.
// If the data size isn't dividable by the number of shards,
// the last shard will contain extra zeros.
//
// You must supply the total size of your input.
// 'ErrShortData' will be returned if it is unable to retrieve the
// number of bytes indicated.
func (r rsStream) Split(data io.Reader, dst []io.Writer, size int64) error {
if size == 0 {
return ErrShortData
}
if len(dst) != r.r.DataShards {
return ErrInvShardNum
}
for i := range dst {
if dst[i] == nil {
return StreamWriteError{Err: ErrShardNoData, Stream: i}
}
}
// Calculate number of bytes per shard.
perShard := (size + int64(r.r.DataShards) - 1) / int64(r.r.DataShards)
// Pad data to r.Shards*perShard.
padding := make([]byte, (int64(r.r.Shards)*perShard)-size)
data = io.MultiReader(data, bytes.NewBuffer(padding))
// Split into equal-length shards and copy.
for i := range dst {
n, err := io.CopyN(dst[i], data, perShard)
if err != io.EOF && err != nil {
return err
}
if n != perShard {
return ErrShortData
}
}
return nil
}