vyvanse/vendor/github.com/pierrec/lz4/reader.go

365 lines
9.7 KiB
Go

package lz4
import (
"encoding/binary"
"errors"
"fmt"
"hash"
"io"
"io/ioutil"
"runtime"
"sync"
"sync/atomic"
)
// ErrInvalid is returned when the data being read is not an LZ4 archive
// (LZ4 magic number detection failed).
var ErrInvalid = errors.New("invalid lz4 data")
// errEndOfBlock is returned by readBlock when it has reached the last block of the frame.
// It is not an error.
var errEndOfBlock = errors.New("end of block")
// Reader implements the LZ4 frame decoder.
// The Header is set after the first call to Read().
// The Header may change between Read() calls in case of concatenated frames.
type Reader struct {
Pos int64 // position within the source
Header
src io.Reader
checksum hash.Hash32 // frame hash
wg sync.WaitGroup // decompressing go routine wait group
data []byte // buffered decompressed data
window []byte // 64Kb decompressed data window
}
// NewReader returns a new LZ4 frame decoder.
// No access to the underlying io.Reader is performed.
func NewReader(src io.Reader) *Reader {
return &Reader{
src: src,
checksum: hashPool.Get(),
}
}
// readHeader checks the frame magic number and parses the frame descriptoz.
// Skippable frames are supported even as a first frame although the LZ4
// specifications recommends skippable frames not to be used as first frames.
func (z *Reader) readHeader(first bool) error {
defer z.checksum.Reset()
for {
var magic uint32
if err := binary.Read(z.src, binary.LittleEndian, &magic); err != nil {
if !first && err == io.ErrUnexpectedEOF {
return io.EOF
}
return err
}
z.Pos += 4
if magic>>8 == frameSkipMagic>>8 {
var skipSize uint32
if err := binary.Read(z.src, binary.LittleEndian, &skipSize); err != nil {
return err
}
z.Pos += 4
m, err := io.CopyN(ioutil.Discard, z.src, int64(skipSize))
z.Pos += m
if err != nil {
return err
}
continue
}
if magic != frameMagic {
return ErrInvalid
}
break
}
// header
var buf [8]byte
if _, err := io.ReadFull(z.src, buf[:2]); err != nil {
return err
}
z.Pos += 2
b := buf[0]
if b>>6 != Version {
return fmt.Errorf("lz4.Read: invalid version: got %d expected %d", b>>6, Version)
}
z.BlockDependency = b>>5&1 == 0
z.BlockChecksum = b>>4&1 > 0
frameSize := b>>3&1 > 0
z.NoChecksum = b>>2&1 == 0
// z.Dict = b&1 > 0
bmsID := buf[1] >> 4 & 0x7
bSize, ok := bsMapID[bmsID]
if !ok {
return fmt.Errorf("lz4.Read: invalid block max size: %d", bmsID)
}
z.BlockMaxSize = bSize
z.checksum.Write(buf[0:2])
if frameSize {
if err := binary.Read(z.src, binary.LittleEndian, &z.Size); err != nil {
return err
}
z.Pos += 8
binary.LittleEndian.PutUint64(buf[:], z.Size)
z.checksum.Write(buf[0:8])
}
// if z.Dict {
// if err := binary.Read(z.src, binary.LittleEndian, &z.DictID); err != nil {
// return err
// }
// z.Pos += 4
// binary.LittleEndian.PutUint32(buf[:], z.DictID)
// z.checksum.Write(buf[0:4])
// }
// header checksum
if _, err := io.ReadFull(z.src, buf[:1]); err != nil {
return err
}
z.Pos++
if h := byte(z.checksum.Sum32() >> 8 & 0xFF); h != buf[0] {
return fmt.Errorf("lz4.Read: invalid header checksum: got %v expected %v", buf[0], h)
}
z.Header.done = true
return nil
}
// Read decompresses data from the underlying source into the supplied buffer.
//
// Since there can be multiple streams concatenated, Header values may
// change between calls to Read(). If that is the case, no data is actually read from
// the underlying io.Reader, to allow for potential input buffer resizing.
//
// Data is buffered if the input buffer is too small, and exhausted upon successive calls.
//
// If the buffer is large enough (typically in multiples of BlockMaxSize) and there is
// no block dependency, then the data will be decompressed concurrently based on the GOMAXPROCS value.
func (z *Reader) Read(buf []byte) (n int, err error) {
if !z.Header.done {
if err = z.readHeader(true); err != nil {
return
}
}
if len(buf) == 0 {
return
}
// exhaust remaining data from previous Read()
if len(z.data) > 0 {
n = copy(buf, z.data)
z.data = z.data[n:]
if len(z.data) == 0 {
z.data = nil
}
return
}
// Break up the input buffer into BlockMaxSize blocks with at least one block.
// Then decompress into each of them concurrently if possible (no dependency).
// In case of dependency, the first block will be missing the window (except on the
// very first call), the rest will have it already since it comes from the previous block.
wbuf := buf
zn := (len(wbuf) + z.BlockMaxSize - 1) / z.BlockMaxSize
zblocks := make([]block, zn)
for zi, abort := 0, uint32(0); zi < zn && atomic.LoadUint32(&abort) == 0; zi++ {
zb := &zblocks[zi]
// last block may be too small
if len(wbuf) < z.BlockMaxSize+len(z.window) {
wbuf = make([]byte, z.BlockMaxSize+len(z.window))
}
copy(wbuf, z.window)
if zb.err = z.readBlock(wbuf, zb); zb.err != nil {
break
}
wbuf = wbuf[z.BlockMaxSize:]
if !z.BlockDependency {
z.wg.Add(1)
go z.decompressBlock(zb, &abort)
continue
}
// cannot decompress concurrently when dealing with block dependency
z.decompressBlock(zb, nil)
// the last block may not contain enough data
if len(z.window) == 0 {
z.window = make([]byte, winSize)
}
if len(zb.data) >= winSize {
copy(z.window, zb.data[len(zb.data)-winSize:])
} else {
copy(z.window, z.window[len(zb.data):])
copy(z.window[len(zb.data)+1:], zb.data)
}
}
z.wg.Wait()
// since a block size may be less then BlockMaxSize, trim the decompressed buffers
for _, zb := range zblocks {
if zb.err != nil {
if zb.err == errEndOfBlock {
return n, z.close()
}
return n, zb.err
}
bLen := len(zb.data)
if !z.NoChecksum {
z.checksum.Write(zb.data)
}
m := copy(buf[n:], zb.data)
// buffer the remaining data (this is necessarily the last block)
if m < bLen {
z.data = zb.data[m:]
}
n += m
}
return
}
// readBlock reads an entire frame block from the frame.
// The input buffer is the one that will receive the decompressed data.
// If the end of the frame is detected, it returns the errEndOfBlock error.
func (z *Reader) readBlock(buf []byte, b *block) error {
var bLen uint32
if err := binary.Read(z.src, binary.LittleEndian, &bLen); err != nil {
return err
}
atomic.AddInt64(&z.Pos, 4)
switch {
case bLen == 0:
return errEndOfBlock
case bLen&(1<<31) == 0:
b.compressed = true
b.data = buf
b.zdata = make([]byte, bLen)
default:
bLen = bLen & (1<<31 - 1)
if int(bLen) > len(buf) {
return fmt.Errorf("lz4.Read: invalid block size: %d", bLen)
}
b.data = buf[:bLen]
b.zdata = buf[:bLen]
}
if _, err := io.ReadFull(z.src, b.zdata); err != nil {
return err
}
if z.BlockChecksum {
if err := binary.Read(z.src, binary.LittleEndian, &b.checksum); err != nil {
return err
}
xxh := hashPool.Get()
defer hashPool.Put(xxh)
xxh.Write(b.zdata)
if h := xxh.Sum32(); h != b.checksum {
return fmt.Errorf("lz4.Read: invalid block checksum: got %x expected %x", h, b.checksum)
}
}
return nil
}
// decompressBlock decompresses a frame block.
// In case of an error, the block err is set with it and abort is set to 1.
func (z *Reader) decompressBlock(b *block, abort *uint32) {
if abort != nil {
defer z.wg.Done()
}
if b.compressed {
n := len(z.window)
m, err := UncompressBlock(b.zdata, b.data, n)
if err != nil {
if abort != nil {
atomic.StoreUint32(abort, 1)
}
b.err = err
return
}
b.data = b.data[n : n+m]
}
atomic.AddInt64(&z.Pos, int64(len(b.data)))
}
// close validates the frame checksum (if any) and checks the next frame (if any).
func (z *Reader) close() error {
if !z.NoChecksum {
var checksum uint32
if err := binary.Read(z.src, binary.LittleEndian, &checksum); err != nil {
return err
}
if checksum != z.checksum.Sum32() {
return fmt.Errorf("lz4.Read: invalid frame checksum: got %x expected %x", z.checksum.Sum32(), checksum)
}
}
// get ready for the next concatenated frame, but do not change the position
pos := z.Pos
z.Reset(z.src)
z.Pos = pos
// since multiple frames can be concatenated, check for another one
return z.readHeader(false)
}
// Reset discards the Reader's state and makes it equivalent to the
// result of its original state from NewReader, but reading from r instead.
// This permits reusing a Reader rather than allocating a new one.
func (z *Reader) Reset(r io.Reader) {
z.Header = Header{}
z.Pos = 0
z.src = r
z.checksum.Reset()
z.data = nil
z.window = nil
}
// WriteTo decompresses the data from the underlying io.Reader and writes it to the io.Writer.
// Returns the number of bytes written.
func (z *Reader) WriteTo(w io.Writer) (n int64, err error) {
cpus := runtime.GOMAXPROCS(0)
var buf []byte
// The initial buffer being nil, the first Read will be only read the compressed frame options.
// The buffer can then be sized appropriately to support maximum concurrency decompression.
// If multiple frames are concatenated, Read() will return with no data decompressed but with
// potentially changed options. The buffer will be resized accordingly, always trying to
// maximize concurrency.
for {
nsize := 0
// the block max size can change if multiple streams are concatenated.
// Check it after every Read().
if z.BlockDependency {
// in case of dependency, we cannot decompress concurrently,
// so allocate the minimum buffer + window size
nsize = len(z.window) + z.BlockMaxSize
} else {
// if no dependency, allocate a buffer large enough for concurrent decompression
nsize = cpus * z.BlockMaxSize
}
if nsize != len(buf) {
buf = make([]byte, nsize)
}
m, er := z.Read(buf)
if er != nil && er != io.EOF {
return n, er
}
m, err = w.Write(buf[:m])
n += int64(m)
if err != nil || er == io.EOF {
return
}
}
}