This adds a new `std` feature to chrono that is enabled by default. By
deactivating this feature via `default-features = false` you can now use
chrono in applications that don't use the standard library. The `serde`
feature is supported as well.
Resolves#336
This patch fixes the case where a negative millisecond offset is passed
to Timezone::timestamp_millis and timestamp_millis_opt and adds a test
case for it. Without this patch, calling timestamp_offset with a
negative value will panic with an overflow like this:
```
---- tests::test_parse_samples stdout ----
thread 'tests::test_parse_samples' panicked at 'attempt to multiply with
overflow',
/home/c/.cargo/registry/src/github.com-1ecc6299db9ec823/chrono-0.4.6/src/offset/mod.rs:349:34
note: Some details are omitted, run with `RUST_BACKTRACE=full` for a
verbose backtrace.
stack backtrace:
0: std::sys::unix::backtrace::tracing:👿:unwind_backtrace
at libstd/sys/unix/backtrace/tracing/gcc_s.rs:49
1: std::sys_common::backtrace::print
at libstd/sys_common/backtrace.rs:71
at libstd/sys_common/backtrace.rs:59
2: std::panicking::default_hook::{{closure}}
at libstd/panicking.rs:211
3: std::panicking::default_hook
at libstd/panicking.rs:221
4: std::panicking::rust_panic_with_hook
at libstd/panicking.rs:477
5: std::panicking::continue_panic_fmt
at libstd/panicking.rs:391
6: rust_begin_unwind
at libstd/panicking.rs:326
7: core::panicking::panic_fmt
at libcore/panicking.rs:77
8: core::panicking::panic
at libcore/panicking.rs:52
9: chrono::offset::TimeZone::timestamp_millis_opt
at
/home/c/.cargo/registry/src/github.com-1ecc6299db9ec823/chrono-0.4.6/src/offset/mod.rs:349
10: chrono::offset::TimeZone::timestamp_millis
at
/home/c/.cargo/registry/src/github.com-1ecc6299db9ec823/chrono-0.4.6/src/offset/mod.rs:327
```
Now (assuming clippy is right) all (~100) uses of ` as ` in the code are
actually doing casts that could potentially silently lose data. Woooo?
At least this means that new `as`s can be extra-scrutinized, and we should
probably be adding debug_assert!s for the casts in real code.
Linkchecker recognizes the distinction between internal and external
links (which are not checked by default), and considers URLs which
does not have the starting URL base as a prefix internal...
This commit has been verified against a proper set of options to
Linkchecker, but there are several false positives (for our purposes)
which would make the automated checking not as effective. </rant>
There used to be multiple modules like `chrono::datetime` which only
provide a single type `DateTime`. In retrospect, this module structure
never reflected how people use those types; with the release of 0.3.0
`chrono::prelude` is a preferred way to glob-import types, and due to
reexports `chrono::DateTime` and likes are also common enough.
Therefore this commit removes those implementation modules and
flattens the module structure. Specifically:
Before After
---------------------------------- ----------------------------
chrono:📅:Date chrono::Date
chrono:📅:MIN chrono::MIN_DATE
chrono:📅:MAX chrono::MAX_DATE
chrono::datetime::DateTime chrono::DateTime
chrono::datetime::TsSeconds chrono::TsSeconds
chrono::datetime::serde::* chrono::serde::*
chrono::naive::time::NaiveTime chrono::naive::NaiveTime
chrono::naive:📅:NaiveDate chrono::naive::NaiveDate
chrono::naive:📅:MIN chrono::naive::MIN_DATE
chrono::naive:📅:MAX chrono::naive::MAX_DATE
chrono::naive::datetime::NaiveDateTime
chrono::naive::NaiveDateTime
chrono::naive::datetime::TsSeconds chrono::naive::TsSeconds
chrono::naive::datetime::serde::* chrono::naive::serde::*
chrono::offset::utc::UTC chrono::offset::UTC
chrono::offset::fixed::FixedOffset chrono::offset::FixedOffset
chrono::offset::local::Local chrono::offset::Local
chrono::format::parsed::Parsed chrono::format::Parsed
All internal documentation links have been updated (phew!) and
verified with LinkChecker [1]. Probably we can automate this check
in the future.
[1] https://wummel.github.io/linkchecker/Closes#161. Compared to the original proposal, `chrono::naive` is
retained as we had `TsSeconds` types duplicated for `NaiveDateTime`
and `DateTime` (legitimately).
This may sound strange, but the final type for the offset "value" was
originally `time::Duration` (returned by `Offset::local_minus_utc`).
This caused a lot of problems becaus adding `Duration` fully interacts
with leap seconds and `Duration` itself is somewhat deprecated.
This commit entirely replaces this role of `Duration` with
`FixedOffset`. So if we had `Offset` and `Duration` to represent
the "storage" offset type and the offset "value" in the past,
we now have `Offset` and `FixedOffset`. Storage-to-value conversion is
called to "fix" the offset---an apt term for the type.
The list of actual changes:
- The time zone offset is now restricted to UTC-23:59:59 through
UTC+23:59:59, and no subsecond value is allowed. As described above,
`FixedOffset` is now fully used for this purpose.
- One can now add and subtract `FixedOffset` to/from timelike values.
Replaces a temporary `chrono::offset::add_with_leapsecond` function.
Datelike & non-timelike values are never affected by the offset.
- UTC and local views to `Date<Tz>` are now identical. We keep
relevant methods for the consistency right now.
- `chrono::format::format` now receives `FixedOffset` in place of
`(Old)Duration`.
- `Offset` now has a `fix` method to resolve, or to "fix" the
"storage" offset (`Offset`) to the offset "value" (`FixedOffset`).
- `FixedOffset::{local_minus_utc, utc_minus_local}` methods are added.
They no longer depend on `Duration` as well.
- Rustc-serialize now uses the same serialization format as Serde.
This also means that the older format (naturally derived from
the internals) is no longer supported.
- Serialization support only existed for rustc-serialize has been
(temporarily) removed. This affects `Date<Tz>` and all individual
time zone types. This does *not* affect `DateTime<Tz>` as it has
individual support per `Tz`.
Please note that this is considered a temporary solution to avoid
stabilizing diverging implementations. Their implementations will
likely be reintroduced later.
Due to the backward compatibility we won't be going to remove support
for `time::Duration` in 0.3, and the initial 0.3.0 release won't have
proper `std::time::Duration` support (haven't finalized the logics).
However we will reserve proper names and signatures for the upcoming
`std::time::Duration` support---the "older" duration type will be
referred as "signed" in the names.
- Added a `chrono::prelude` module. This does not have the (old)
`Duration` type reexported, so the documentation has now correctly
replaced all occurrences of `chrono::Duration`. The existing
`chrono::Duration` reexport itself remains for the compatibility.
- Avoided using a plain `Duration` type in the signature, to avoid
any ambiguity.
- Renamed `checked_{add,sub}` to `checked_{add,sub}_signed`.
- Subtraction operator between two instants has been removed and
replaced with `signed_duration_since`. This follows the naming
chosen by `std::time::SystemTime` etc., and the version for newer
`std::time::Duration` will be named to `duration_since`.
This provides examples for most of the constructor-like methods on
`TimeZone`, examples on the various `Offset` impls, and links
`NaiveDateTime` to `TimeZone` so that it's more obvious how you're
supposed to do things.
This is related to #88, which is something that I ran into when I
started using rust-chrono.
While writing documentation tests for NaiveTime it was found that
the addition involving leap seconds is *still* slightly broken.
(A consequence of having less tests, well.) The addition routine
has been rewritten to be explicit about leap seconds while passing
all other tests, so the rewrite does not change the intention.
For a while Chrono's serialization support was barely working,
i.e. usable but never been safe. While it wouldn't cause any memory
unsafety, attacker can fabricate an input that will make most users
confused (e.g. seemingly same Date which doesn't compare equally).
This commit will properly error for those cases.
It was also problematic that the generated rustc-serialize format is
very inefficient, especially for JSON. Due to the backward
compatibillity this commit does NOT fix them (likely to be in 0.3),
but this does try to define the exact format and define tons of
tests to detect any change to the serialization.
There are several remaining problems in the serialization format;
the serde implementation seems good, but it is unable to distinguish
some cases of leap seconds (practically won't matter, but still).
The rustc-serialize implementation would require a massive redesign.
For now, I postpone those issues to 0.3 (what a convenient excuse).
Fixes#42.
In Windows libtime populate `time::Tm` from `SYSTEMTIME`, which
unfortunately does not contain `tm_yday`. It tries to calculate it
from other fields, but... as one can say it is completely wrong.
Since other fields are copied in verbatim we work around this
problem by using a less efficient method.
Fixes#85.
This is due to somewhat ambiguous semantics of `Date`. It cannot
really constructed without an intermediate `DateTime` much like
the removed `Time`, but it is much more useful than `Time` so
we need some reasonable meaning to it. This commit clarifies
that meaning and corrects some problems around it:
- The date itself is timezone-agnostic unless the timezone itself
has an offset equal to or greater than one day. In all current
time zones, the date conversion should be a no-op.
- The date may be attached some offset; that offset should have
been occurred within the corresponding day in either the local
time or the UTC.
- `TimeZone` is free to assign the offset within this constraint.
For convenience, the current `Local` time zone assumes the local
midnight or the UTC midnight.
- `DateTime<Tz>` and `Date<Tz>` is now `Copy`/`Send` when
`Tz::Offset` is `Copy`/`Send`. The implementations for them were
mistakenly omitted. Fixes#25.
- `Local::from_utc_datetime` didn't set a correct offset.
The tests for `Local` were lacking. Fixes#26.
`Time` with an associated time zone is in principle possible, but
in practice it can only meaningfully constructed from an existing
`DateTime`. this makes it hard to implement other operations
natural to `NaiveTime` for `Time` (e.g. `with_*` methods), so
we simply let it go.
migration path: if you *do* happen to use `Time`, don't panic!
every operation possible to `Time` is much more possible to
`NaiveTime`. if you have to deal with a local time, first combine
it with a `NaiveDate`, convert it via `TimeZone::from_local_datetime`
then extract `Time` part again.
this is partly because... we are using the simple name `timestamp`
in the `Parsed` anyway. that value is so widespread enough that
its name can be simply THE timestamp. old methods have been marked
deprecated.
Waldir Pimenta
coolreader18
Brandon W Maister
Christopher Serr
eV
Joey Ezechiels
kennytm
jean-airoldie
Casey Marshall
寧靜
Jethro Beekman
Kang Seonghoon
Richard Petrie
Brandon W Maister
János Illés
Sergey V. Galtsev
Jisoo Park
Dan