Commit Graph

65 Commits

Author SHA1 Message Date
Ashley Mannix 1d1bfd93da remove unneeded hrtb 2017-04-24 07:17:37 +10:00
Ashley Mannix 5504f6c854 optimise serialize 2017-04-21 21:31:50 +10:00
Ashley Mannix 80c3582531 upgrade to serde 1.0 2017-04-21 21:12:26 +10:00
Kang Seonghoon 1583df95b5
Upgrade bincode dev-dependency to >=1.0.0-alpha6.
The test depends on the bincode API changed at that version.
2017-04-19 00:34:10 +09:00
Kang Seonghoon d036c07370
Bincode 1.0.0-alpha2 no longer has the `bincode::serde` module. 2017-02-14 03:28:14 +09:00
Kang Seonghoon 7ea1ce5080
`FixedOffset` is now the official "fixed offset value" type.
This may sound strange, but the final type for the offset "value" was
originally `time::Duration` (returned by `Offset::local_minus_utc`).
This caused a lot of problems becaus adding `Duration` fully interacts
with leap seconds and `Duration` itself is somewhat deprecated.

This commit entirely replaces this role of `Duration` with
`FixedOffset`. So if we had `Offset` and `Duration` to represent
the "storage" offset type and the offset "value" in the past,
we now have `Offset` and `FixedOffset`. Storage-to-value conversion is
called to "fix" the offset---an apt term for the type.

The list of actual changes:

- The time zone offset is now restricted to UTC-23:59:59 through
  UTC+23:59:59, and no subsecond value is allowed. As described above,
  `FixedOffset` is now fully used for this purpose.

- One can now add and subtract `FixedOffset` to/from timelike values.
  Replaces a temporary `chrono::offset::add_with_leapsecond` function.
  Datelike & non-timelike values are never affected by the offset.

- UTC and local views to `Date<Tz>` are now identical. We keep
  relevant methods for the consistency right now.

- `chrono::format::format` now receives `FixedOffset` in place of
  `(Old)Duration`.

- `Offset` now has a `fix` method to resolve, or to "fix" the
  "storage" offset (`Offset`) to the offset "value" (`FixedOffset`).

- `FixedOffset::{local_minus_utc, utc_minus_local}` methods are added.
  They no longer depend on `Duration` as well.
2017-02-07 03:43:59 +09:00
Kang Seonghoon 36c45f2e02 Removed methods deprecated in 0.2. 2017-02-07 03:13:55 +09:00
Kang Seonghoon c118a3985f
Serialization cleanup for 0.3.
- Rustc-serialize now uses the same serialization format as Serde.
  This also means that the older format (naturally derived from
  the internals) is no longer supported.

- Serialization support only existed for rustc-serialize has been
  (temporarily) removed. This affects `Date<Tz>` and all individual
  time zone types. This does *not* affect `DateTime<Tz>` as it has
  individual support per `Tz`.

  Please note that this is considered a temporary solution to avoid
  stabilizing diverging implementations. Their implementations will
  likely be reintroduced later.
2017-02-07 03:08:01 +09:00
Kang Seonghoon c63ef14734
`time::Duration` is no longer the sole duration type described.
Due to the backward compatibility we won't be going to remove support
for `time::Duration` in 0.3, and the initial 0.3.0 release won't have
proper `std::time::Duration` support (haven't finalized the logics).
However we will reserve proper names and signatures for the upcoming
`std::time::Duration` support---the "older" duration type will be
referred as "signed" in the names.

- Added a `chrono::prelude` module. This does not have the (old)
  `Duration` type reexported, so the documentation has now correctly
  replaced all occurrences of `chrono::Duration`. The existing
  `chrono::Duration` reexport itself remains for the compatibility.

- Avoided using a plain `Duration` type in the signature, to avoid
  any ambiguity.

- Renamed `checked_{add,sub}` to `checked_{add,sub}_signed`.

- Subtraction operator between two instants has been removed and
  replaced with `signed_duration_since`. This follows the naming
  chosen by `std::time::SystemTime` etc., and the version for newer
  `std::time::Duration` will be named to `duration_since`.
2017-02-06 09:39:32 +09:00
Kang Seonghoon de4df91421
Removed all remaining mentions of rust-chrono (very old name). 2017-02-06 06:15:57 +09:00
Ashley Mannix 898e266e02 update for serde 0.9 2017-02-01 20:02:22 +10:00
Brandon W Maister a4c1cc6ed2 Improve docs around constructing DateTime objects
This provides examples for most of the constructor-like methods on
`TimeZone`, examples on the various `Offset` impls, and links
`NaiveDateTime` to `TimeZone` so that it's more obvious how you're
supposed to do things.

This is related to #88, which is something that I ran into when I
started using rust-chrono.
2016-11-12 16:09:08 -05:00
David Tolnay c3cd76af16
Add bincode serde tests 2016-08-16 18:08:19 -04:00
David Tolnay c3b9a26bb0 Support deserializing from bincode
Bincode is a minimal format that expects the Deserialize
implementation to tell it what type of data it should
expect to see.
2016-08-16 02:54:14 -04:00
Kang Seonghoon d50546a592 More documentation for NaiveTime, and addition fixes.
While writing documentation tests for NaiveTime it was found that
the addition involving leap seconds is *still* slightly broken.
(A consequence of having less tests, well.) The addition routine
has been rewritten to be explicit about leap seconds while passing
all other tests, so the rewrite does not change the intention.
2016-08-06 19:32:01 +09:00
Kang Seonghoon ad6253f653 Proper (de)serialization format handling.
For a while Chrono's serialization support was barely working,
i.e. usable but never been safe. While it wouldn't cause any memory
unsafety, attacker can fabricate an input that will make most users
confused (e.g. seemingly same Date which doesn't compare equally).
This commit will properly error for those cases.

It was also problematic that the generated rustc-serialize format is
very inefficient, especially for JSON. Due to the backward
compatibillity this commit does NOT fix them (likely to be in 0.3),
but this does try to define the exact format and define tons of
tests to detect any change to the serialization.

There are several remaining problems in the serialization format;
the serde implementation seems good, but it is unable to distinguish
some cases of leap seconds (practically won't matter, but still).
The rustc-serialize implementation would require a massive redesign.
For now, I postpone those issues to 0.3 (what a convenient excuse).

Fixes #42.
2016-08-04 03:22:12 +09:00
Ben Eills bb50154d8c Add functions to get milli/micro/nano-seconds from a DateTime (#81)
* Add functions to get milli/micro/nano-seconds from a DateTime

Using the underlying naive::NaiveTime fractional part, we compute
the number of milli/micro/nano-seconds since the last second boundary.

The reason for not computing elapsed time since 1970 is because we
would hit potential issues of i64s not being large enough (the range
would be strictly smaller than the 64bit-timestamp range, causing
compatibility issues).

* Rename subsecond functions

Renamed accessors to subsec_{nano,micro,milli}, as suggested
in pull request comment.  Also added warnings for leap second
consitions causing these values to exceed the normal range
of 0..10^n.

Fixed editor's previous obnoxious whitespace changes.
2016-07-16 14:19:34 +09:00
Ryan Lewis f8630fce81 Update serde to 0.7.0
rename visit_str to serialize_str
rename E::syntax(&str) to E::Custom(String)
rename deserializer.visit to deserialize.deserialize
2016-03-03 20:54:47 +13:00
Kang Seonghoon 4025d617f5 Fixed #61.
Technically it was a problem of `DateTime::date` with a lax test.
Documented the intention and guarantees on `Date` as a result.
2016-02-05 01:23:46 +09:00
Martin Risell Lilja d8f2a3e7d8 Added serde support for DateTime, NaiveDate, NaiveTime and NaiveDateTime. 2015-11-19 00:12:13 +01:00
Kang Seonghoon acf4eab102 more documentation, finishing examples for chrono::naive::date. 2015-09-06 21:30:09 +09:00
Jisoo Park b5281af9f3 Add optional rustc-serialize support 2015-04-28 18:42:18 +09:00
Kang Seonghoon eced570882 0.2.11: language changes.
- Replaced `thread::scoped` with `thread::spawn` to cope with
  a rare de-stabilization event.

- `#[deprecated]` is (ironically) deprecated with user crates.
  All uses of them have been replaced by doc comments.
2015-04-17 01:28:31 +09:00
Kang Seonghoon 2be6e14446 Fixes #27.
This is due to somewhat ambiguous semantics of `Date`. It cannot
really constructed without an intermediate `DateTime` much like
the removed `Time`, but it is much more useful than `Time` so
we need some reasonable meaning to it. This commit clarifies
that meaning and corrects some problems around it:

- The date itself is timezone-agnostic unless the timezone itself
  has an offset equal to or greater than one day. In all current
  time zones, the date conversion should be a no-op.

- The date may be attached some offset; that offset should have
  been occurred within the corresponding day in either the local
  time or the UTC.

- `TimeZone` is free to assign the offset within this constraint.
  For convenience, the current `Local` time zone assumes the local
  midnight or the UTC midnight.
2015-03-03 02:37:20 +09:00
Dan d85ca7564f Remove old closure kind syntax 2015-03-02 11:50:03 +00:00
Kang Seonghoon 2dbc11dcb1 0.2.3: Fixed a couple of outstanding bugs.
- `DateTime<Tz>` and `Date<Tz>` is now `Copy`/`Send` when
  `Tz::Offset` is `Copy`/`Send`. The implementations for them were
  mistakenly omitted. Fixes #25.

- `Local::from_utc_datetime` didn't set a correct offset.
  The tests for `Local` were lacking. Fixes #26.
2015-02-27 13:08:20 +09:00
Kang Seonghoon c11b6deb5a 0.2.1: language changes.
- `std::hash` has been renewed.

- `DelayedFormat` no longer has a redundant lifetime.
2015-02-21 18:15:11 +09:00
Kang Seonghoon 30322bbc89 added `parse_from_rfc{2822,3339}`/`to_rfc{2822,3339}` methods to DateTime. 2015-02-19 04:57:21 +09:00
Kang Seonghoon 82c9345a4d okay, new `DateTime::time` was incorrect. 2015-02-19 04:28:38 +09:00
Kang Seonghoon f39b13a14c removed timezone-aware `Time` type.
`Time` with an associated time zone is in principle possible, but
in practice it can only meaningfully constructed from an existing
`DateTime`. this makes it hard to implement other operations
natural to `NaiveTime` for `Time` (e.g. `with_*` methods), so
we simply let it go.

migration path: if you *do* happen to use `Time`, don't panic!
every operation possible to `Time` is much more possible to
`NaiveTime`. if you have to deal with a local time, first combine
it with a `NaiveDate`, convert it via `TimeZone::from_local_datetime`
then extract `Time` part again.
2015-02-19 04:17:27 +09:00
Kang Seonghoon e997403c10 `num_seconds_from_unix_epoch` is gone, long live `timestamp`!
this is partly because... we are using the simple name `timestamp`
in the `Parsed` anyway. that value is so widespread enough that
its name can be simply THE timestamp. old methods have been marked
deprecated.
2015-02-19 02:45:29 +09:00
Kang Seonghoon c1d0b0279f various doc cleanups; added `FromStr` impl for `DateTime<Local>`.
also made a small script for auto-generating `README.md` out of
the main doc comment from `src/lib.rs`.
2015-02-19 02:21:52 +09:00
Kang Seonghoon 664c4d0191 merged the new offset design branch. 2015-02-19 01:48:29 +09:00
Kang Seonghoon a4f5d19d24 mass renaming from offset/state to timezone/offset. 2015-02-19 00:30:13 +09:00
Kang Seonghoon e43cb62f10 initial implementation of `Offset` redesign (#11).
- We have splitted `Offset` into `Offset` and `OffsetState` (name
  changes in consideration). The former is used to construct and convert
  local or UTC date, and the latter is used to store the UTC offset
  inside constructed values. Some offsets are their own states as well.

- This uses lots of associated types which implementation is still in
  flux. Currently it crashes with debuginfo enabled. We've temporarily
  disabled debuginfo from `Cargo.toml`.

- This technically allows a conversion to the local time, but not yet
  tested.
2015-02-19 00:25:04 +09:00
Kang Seonghoon 46996e35e1 implemented `FromStr` for `DateTime<FixedOffset/UTC>`. 2015-02-19 00:03:58 +09:00
Kang Seonghoon 637784c8ef renamed `from_str` methods to `parse_from_str`.
so that we can safely implement `FromStr` traits for those types.
also updates READMEs and rewires `%+` specifier of `StrftimeItems`
to a new RFC 3339 formatting item.
2015-02-15 21:27:12 +09:00
Kang Seonghoon c7f132cca2 added `format_with_items` methods to every types. 2015-02-14 12:34:31 +09:00
Kang Seonghoon 7eb9a1a983 public interfaces for parser are now available. 2015-02-05 02:16:35 +09:00
Kang Seonghoon 3d00a0fd5a added `checked_{add,sub}` methods to `[Naive]Date[Time]` types.
- Existing `+` and `-` operators use them, and properly panics with
  a correct error message on overflow/underflow.
2015-02-04 16:19:54 +09:00
Kang Seonghoon 43ee68b522 new formatter design!
- Format string is internally represented as a series of formatting
  items. Items can be directly given to now-public `format::format`
  function as well.

- Format string parser is separated to `format::strftime` module.
  This is to allow for potentional alternative formatting syntaxes.

- `DelayedFormat` now receives an iterator for formatting items.
2015-02-04 16:19:54 +09:00
Kang Seonghoon cf5e2f322f 0.1.15: language changes.
- `std::fmt::Show` is now `std::fmt::Debug`.
- `std::fmt::String` is now `std::fmt::Display`.
2015-01-24 17:45:12 +09:00
Kang Seonghoon 45765ebd13 0.1.14: fixed a missing `String` impl for `Local`.
Fixes #20. Thanks to @daboross.
2015-01-10 12:32:54 +09:00
Kang Seonghoon ca84749869 0.1.13: language changes and fmt::String supports.
- Every type modulo `LocalResult` and `Offset` now implements
  `std::fmt::String`, so `.to_string()` can be used.
  The exact format has been changed for better looking output.

- `std::fmt::Show` are intended for "stricter" output,
  which mostly means the strict ISO 8601 format.
  `DelayedFormat` also implements this, but only for inspection.

- `Offset` should implement `Show` but can omit `String`.
  The old `name` method is merged into `String` implementations.
2015-01-10 03:27:24 +09:00
Kang Seonghoon d79c460fc4 0.1.12: language changes, removed ops for Duration in the lhs.
- Feature flags used are all accepted.
- Orphan check workaround is no longer required.
- Impl reachability rules prevent the addition of `Duration + others`,
  as `Duration` is not implemented in this crate. Removed the impl;
  use `others + Duration` as a workaround.
2015-01-08 02:08:41 +09:00
Kang Seonghoon e2ddee2f76 0.1.9: language changes.
- `Add` and `Sub` switches to associated types.
2015-01-05 18:31:15 +09:00
Kang Seonghoon cde432ed8e bumped copyright years. 2015-01-04 15:08:25 +09:00
Ken Tossell 3303127415 Fixed build against rust nightly.
Added 'use' statements for cmd::Ordering, ops::{Add, Sub}, borrow::IntoCow, num::ToPrimitive

Changed deriving -> derive. Changed [x, ..N] -> [x; N].

Made format(f: &fmt::Formatter) return fmt::Result instead of
IoResult. Had to raise generic errors in a couple of cases where
IoResult's fields were being set (but these errors were being thrown
out anyway).

Temporarily set #![feature(old_orphan_check)] because

Thanks for @eddyb for explaining the format() situation.
2015-01-03 17:45:07 -05:00
Kang Seonghoon e982cd1851 0.1.5: language changes.
- Add and Sub requires a value instead of a reference.
- Tuple indexing is now ungated.

Fixes #15.
2014-12-17 10:29:48 +09:00
klutzy 37d85ffd3b Update for upstream changes 2014-12-13 20:29:06 +09:00