fdd0b6ccf1
Do not penalize for spambot checks if creating a new channel.
2010-02-21 01:45:51 +01:00
896e8e51b7
JOIN 0: Make spambot check equivalent to PART's.
2010-02-21 01:12:04 +01:00
8cf4cea3da
Remove dead code: last_join_time is already updated by check_spambot_warning().
2010-02-21 01:10:04 +01:00
d5e959f179
Do not check for spambot if the user is not allowed to join the channel.
2010-02-21 01:07:32 +01:00
8a64e49e4c
challenge: Fix build.
2010-02-18 23:42:07 +01:00
1c19179d64
Add certfp check to challenge too.
2010-02-17 23:01:25 -06:00
e4c72f7919
Clarify ERR_NOOPERHOST and convert it to use sendto_one_numeric().
2010-02-17 06:51:41 -06:00
d8a023eddd
Add support for client certificate fingerprints in o:lines.
2010-02-17 06:41:41 -06:00
625a2b1f99
Subject /invite to umodes +g and +R.
...
The behaviour is the same as /msg except that where
/msg would send RPL_UMODEGMSG to the user, the /invite
is instead let through. This counts as a notification
for caller_id_wait like RPL_UMODEGMSG.
Checks are on the target user's server, which means an
error message will appear after RPL_INVITING.
This must be because the accept list is not globally
known.
2010-02-15 23:07:14 +01:00
0f18c084bb
Add missing return value.
2010-02-15 22:18:00 +01:00
3f76eb8a8c
Subject /invite to target change.
...
Similar to /msg, inviting a user that is not in a channel
you have op or voice in requires a free target; opers always
have a free target.
Being invited adds the source as a reply target.
2010-02-15 22:08:55 +01:00
878733fd68
Move target change code to src/tgchange.c,
...
so we can use it for /invite as well.
2010-02-15 21:58:34 +01:00
7eb9307794
target change: Allow free replies.
...
When a user receives a private message, notice or RPL_UMODEGMSG,
add the source to a special set of 5 target slots.
These slots are checked in the normal way when sending messages,
allowing a reply without using up a free target.
This feature will not be very useful if a user is being messaged
by many different users; to help this, messages blocked entirely
by +g or +R do not affect the targets. CTCP replies also remain
free in terms of targets.
2010-02-15 01:07:07 +01:00
3002877654
target change: Overwrite the least recently used target with a new one.
2010-02-15 00:31:17 +01:00
d29b1834c3
Make the number of targets tracked for target change a #define.
2010-02-13 15:18:17 +01:00
0e0c4508f1
testline/testgecos: Send "not an oper" message if appropriate.
2010-02-07 17:57:36 +01:00
54656d7650
Pass certfp to other servers and show it in whois. Do not show it on connect.
...
The server protocol for this is
:<uid> ENCAP * CERTFP :<40 hex chars>
both in new user introductions and in burst.
As in oftc-hybrid, only the user themselves and opers can see the certfp.
Displaying the certfp on connect seems unnecessary to me,
the user can whois themselves if needed.
2010-02-06 00:18:27 +01:00
306274351b
Fix /links buffer overflow.
2010-01-27 21:05:10 +01:00
04bf0760f9
Fix op-moderate (cmode +z) for channel names with '@'.
2010-01-24 19:37:00 +01:00
343e239585
Put back fb7d6089158e, not setting large_ctcp_sent for CTCP ACTION.
2010-01-20 00:03:57 +01:00
92a7995129
Merge +C (no CTCP to channels) from ircd-seven.
2010-01-19 02:11:04 -06:00
ebc55af53c
Do not set large_ctcp_sent for CTCP ACTION as it does not request a reply.
2010-01-14 01:12:16 +01:00
ddbd4a8151
If a removed resv was temporary, mention this in the server notice.
...
This agrees with xline.
2010-01-09 22:14:53 +01:00
4d9be1a6a3
Add back unresv (permanent resv) notices.
2010-01-09 22:12:06 +01:00
609a0d5514
Put back resv_forcepart.
...
This undoes erroneous revert in a3c064b3b8a2.
2010-01-09 19:08:48 +01:00
70c6c150f6
Complete the move of xlines and resvs from aconf->name to aconf->host.
2010-01-08 18:46:29 +01:00
c2e615382b
Do not change \s in xlines to spaces, match_esc() treats \s correctly.
...
This undoes erroneous revert in a3c064b3b8a2.
2010-01-08 18:13:47 +01:00
4cb3ae7836
Add back missing notices.
2010-01-07 18:17:08 -06:00
ff0482a9cb
Fix up more things with bandb.
2010-01-07 18:14:15 -06:00
3aa4e417b9
Make this work again.
2010-01-07 17:50:49 -06:00
03368cb9ab
Make this work again.
2010-01-07 17:49:08 -06:00
d63447bfe7
Readd some oper notices.
2010-01-07 17:37:52 -06:00
d8a4c5f618
Update modules to use bandb_add()/bandb_del().
2010-01-07 17:19:03 -06:00
9e8b3b4345
SCAN UMODES: default list-max to 500, like a global WHO.
2010-01-01 22:55:25 +01:00
4606e8fc6c
Merge
2009-12-08 19:23:32 +00:00
c387fc41ae
Revert all presence-related changes
2009-12-08 19:22:55 +00:00
14a64ad404
Use full (:n!u@h) prefix for sending ETB from a user to clients.
2009-09-20 00:44:47 +02:00
100563e836
Force part local users (not resv_exempt) on channel resv.
...
A notice will be sent to any force parted users that the channel
is temporarily/permanently unavailable on the server.
A new config option channel::resv_forcepart can be used to disable this.
from ircd-ratbox (dubkat)
2009-09-19 21:24:35 +02:00
f80e76cf2c
Disallow changing away status via /presence.
...
Allowing this desynchronizes clients and servers that
do not know about this extension without good reason.
If you want to allow this, change it to spit out the
usual AWAY protocol.
2009-06-04 00:01:57 +02:00
338dd42d64
Reject presence updates with too long keys, instead of truncating them
...
and causing soft assertion failures. Values are still
silently truncated though.
2009-06-03 23:49:50 +02:00
f62bb0776a
Correct minimum parameter counts for PRESENCE.
2009-06-03 20:03:15 +02:00
320a0f8528
ENCAPs cannot come from local clients, no need to check.
2009-06-03 19:57:27 +02:00
7cc7a2c041
Remove special CAP presence handling of /whois away message.
...
This cannot work because /whois is executed remotely too
and CAPs aren't known remotely.
2009-06-03 19:54:49 +02:00
fa00b4ada9
presence: m_presence module: Use safer get_metadata() where appropriate, to avoid crash possibilities.
2009-06-02 02:55:45 -05:00
50aa2dd31d
presence: Use RPL_WHOISMETADATA.
2009-06-02 02:44:31 -05:00
fa2a410abe
presence: If CLICAP_PRESENCE is enabled, then RPL_AWAY is replaced by the "away" keyword in the presence dataset.
...
As such, only fall back to legacy RPL_AWAY if CLICAP_PRESENCE is not set on source_p.
2009-06-02 02:17:42 -05:00
6364809623
presence: Add CLICAP_PRESENCE.
...
This will enable broadcasting presence updates on channels.
2009-06-02 02:14:44 -05:00
51f73b614b
presence: Replace stagnant free_away() call with delete_metadata(..., "away").
2009-06-02 02:06:18 -05:00
987ef7eb1f
presence: Remove user.away, replaced by a metadata entry.
...
Cache the metadata retrieval value where feasible for minimal performance impact.
2009-06-02 02:03:51 -05:00
0827f524e0
presence: Add m_presence module. This provides an ENCAP s2s interface and lowlevel client interface.
2009-06-02 01:45:43 -05:00
fcda56627d
Allow ctcp replies through floodcount after ctcp'ing a large group.
...
A large group is any $$ or $# or a channel with more than
floodcount/2 local members, checked on each server separately.
Note that floodcount checks are done on the sender's server.
The special treatment is active for 15 seconds.
2009-05-17 20:52:16 +02:00
cbd758d71c
Rewrite perm xlines containing '",' from local opers (to '"\,').
...
The change also applies to xlines sent to other servers.
Note that the backslash must be supplied in an unxline.
Incoming xlines containing '",' are rejected to avoid
inconsistency between servers.
2009-05-08 14:42:55 +02:00
b6c85cc60b
Disallow the sequence '",' in perm xlines,
...
it would cause problems with xline.conf.
2009-05-08 14:27:30 +02:00
44bdc688cb
Change \s to space when writing xline.conf, to be compatible with older versions.
2009-05-08 13:40:09 +02:00
448a723f81
Disallow double quotes in klines.
...
These could cause parse problems with kline.conf.
2009-05-08 01:50:35 +02:00
6e5b8a5dec
Disallow commas in channel resvs.
...
These can never match and could cause parse problems in resv.conf.
2009-05-08 01:23:40 +02:00
63860dd1a7
Change xlines to store spaces as \s.
...
Spaces in xline.conf files are changed to \s in memory
and recognized on unxline, but are not changed in the
file. New xlines are added to xline.conf files with \s.
xline.conf written by this commit or newer will not work
properly with charybdis older than 1124:131254925f32 (which
introduced \s support in match_esc()).
2009-05-08 00:21:14 +02:00
eb5e3f1520
Stop changing \s to spaces in masktrace and testmask,
...
match_esc() handles \s directly now.
2009-05-07 23:58:32 +02:00
031c4b89d3
Move check for required CAPABs to mr_server -- CAPAB may not be sent.
...
Also fix exit message.
2009-04-21 18:43:07 +02:00
fde16193c4
Allow for capabilities to be marked as "required".
...
If capability negotiation fails on these capabilities, then the server link is dropped.
2009-04-20 09:36:55 -05:00
16d8d9fc6d
can_kick hook, based on the ircd-seven one.
2009-04-20 09:20:11 -05:00
59bb80930d
Allow / in spoofed hosts
2009-04-20 08:37:13 -05:00
cb9345dcd1
Simplify floodcount checking, it is no longer affected by +g/+R anymore.
2009-04-19 00:04:21 +02:00
c925bc7706
Use uid/sid for some ERR_CHANOPRIVSNEEDED if they go to a remote client.
2009-04-09 23:45:35 +02:00
80df74cfc5
Add new topic command ETB, allowing services to set topic+setter+ts always
...
(provided channelTS != 0).
ETB is controlled by the EOPMOD capab. Fairly complicated
stuff is needed for older servers.
ETB can come from clients or servers, but at this time it
should only be sent from clients, as otherwise it is not
always possible to update older servers.
2009-03-29 17:08:42 +02:00
6ce8910d97
Apply +z to messages blocked by +b and +q as well.
...
This adds a new server capab EOPMOD which will be used
for an extended topic command also.
2009-03-29 15:48:07 +02:00
cb4ddd7268
Do not send "<blah> is rehashing <blah>" notices to the remote oper.
2009-03-07 16:57:58 +01:00
0b1e46f5b4
Allow /rehash throttles to clear throttling.
2009-03-07 01:49:09 +01:00
8fc0a9b621
Correct WHOX overflow check so it also works for fields other than the last.
...
Found with llvm static analyzer.
2009-03-01 01:58:53 +01:00
a6210c453a
Remove some unused variables.
...
Found with llvm static analyzer.
2009-03-01 01:53:40 +01:00
dea418e9b4
Add channel::only_ascii_channels config option
...
to restrict channel names to printable ascii only.
Like disable_fake_channels this only applies to joins
by local users; unlike disable_fake_channels it applies
to opers as well.
2009-02-22 00:12:21 +01:00
f47964e44a
Disallow invites to juped channels.
...
In particular, this is checked when the source is
local and not resv_exempt, or the target is local and
not resv_exempt.
2009-02-06 14:07:03 +01:00
6b2cf989b6
Disable autoconnect for a server with excessive TS delta.
...
Note that in some cases (different TS delta settings,
heavy lag) it is possible only one of the servers
detects the problem and autoconnect may be left enabled.
The mechanism used for disabling is the same as
/quote set autoconn <server> 0; the A flag in /stats c
disappears and a rehash or /quote set autoconn can put
it back.
2009-02-05 23:43:07 +01:00
af2484840a
Remove comments related to (removed) ability to disable TS6.
2009-01-30 16:50:00 +01:00
1ba281712f
For remote rehashes, send error messages to the requesting oper as well.
2009-01-30 00:11:12 +01:00
c70fcd85f7
Show D:line oper reason in /testline.
2009-01-27 20:20:37 +01:00
1b09d11527
Get rid of local variable shadowing.
2009-01-25 16:26:17 +01:00
e19c515ce9
commit 1df4ff0b0558e4698819f8e4ac6ecb7654b81a2c
...
Author: Stephen Bennett <spb@exherbo.org>
Date: Sun Jan 18 16:30:27 2009 +0000
Make testline show oper reason and setter information for K:lines, where applicable
2009-01-25 16:23:36 +01:00
77f3c1f440
Remove some more references to parv[0] in comments.
2009-01-18 21:20:14 +01:00
ac408af6cb
Update comments for parv[0] removal.
2009-01-18 18:22:43 +01:00
3619e29987
Change /stats O to show privset blocks (oper only).
...
To show operator blocks, only /stats o (lowercase) now works.
2009-01-18 01:35:24 +01:00
8e425f4137
Replace parv[0] with source_p->name.
2009-01-17 01:18:19 +01:00
a13b19f9fe
Do not log ERROR messages from unknowns.
...
from ircd-ratbox (androsyn)
2009-01-17 00:23:02 +01:00
1c4d0f3ceb
Remove more TS5 remnants.
2009-01-16 23:18:10 +01:00
ffa772f3d4
Log to serverlog when throwing out a server because of a bad nickname.
2009-01-16 23:10:49 +01:00
6eb9f03a13
Close the local link that sends a TS5 NICK introduction.
...
This is no longer supported and was already broken,
sending out a UID message without UID parameter to
other servers.
2009-01-16 23:08:05 +01:00
9f811fcefd
Reject SCAN UMODES if invalid parameters are given.
2009-01-16 18:33:38 +01:00
7b31d528b1
Remove obsolete comment.
2009-01-07 23:35:24 +01:00
c80b76f022
Make SCAN UMODES GLOBAL NO-LIST MASK <mask> no longer an operspy command.
...
This agrees with allowing MODE <nick> as non-operspy.
2009-01-01 20:32:30 +01:00
6dfa266965
Allow opers and shide_exempt users to see hopcounts even if flatten_links is on.
2008-12-27 22:41:52 +01:00
c552a39d49
Show libratbox version info to opers in /info.
2008-12-23 00:28:05 +01:00
0ec112cc00
Add code to detect overflow in WHOX.
...
This should currently be impossible, but may be
possible with extremely long server/nick names and
additional fields.
In case of overflow, the string sent to to the user is
truncated and if it was the first overflow since the
module was loaded a notice is sent to snomask +d.
2008-12-20 17:17:27 +01:00
760ef9e1ea
Show rejectcache/throttle in /testline output.
...
This adds more RPL_TESTLINE numerics with code '!'.
Different from the other results, the I/K line or
RESV will be shown as well.
2008-12-19 19:24:12 +01:00
76d4968137
Show throttle info in /stats t.
...
from ircd-ratbox (androsyn)
2008-12-16 21:02:04 +01:00
f717c20dbb
As in shadowircd, increase buffer for /who status.
...
Not necessary here but nice for consistency.
2008-12-03 22:54:30 +01:00
73788f7953
Add operspy /topic.
...
This allows querying any channel's topic under the
operspy rules, but not changing it.
2008-12-03 00:16:05 +01:00
e752dd2618
Allow coloured part reasons in -c channels.
2008-11-29 22:22:18 +01:00
17d00839b3
make is_cti/is_sti collect times connected in unsigned long long instead of time_t as well..on 32bit boxes that is going to wrap pretty quickly
...
committer: Valeriy Yatsko <dwr@it-penza.org>
2008-11-16 10:04:09 +03:00
59eedf155f
Allow +z messages from outside if -n.
...
This gives a useful meaning to the cmode combo +mz-n:
messages from ops and voices go to all channel members,
messages from anyone else (on or off channel) go to ops.
With +mnz, messages from outside are not allowed at all.
2008-11-15 22:56:09 +01:00
79ba162940
Truncate idle time in /who to 32 bits.
...
Pointed out by dwr (but solved differently).
2008-11-15 21:15:38 +01:00
Jilles Tjoelker
William Pitcock
Stephen Bennett
Aaron Sethman