Commit Graph

214 Commits

Author SHA1 Message Date
Nathan Phillip Brink 68ebdf7f1e Fix inconsistency between --sysconfdir and --with-confdir, deprecate --with-confdir.
The inconsistency was created in
c74836dc4a5bde1e0bf38da58053bf5f28da8ff5 where genssl.sh.in was made
to use sysconfdir while the IRCd and buildsystem still used confdir.
2012-03-02 23:18:27 -05:00
Nathan Phillip Brink e8da6ccee6 Add explicit support for being installed into a system triggered with --enable-fhs-paths.
Add two mechanism for avoiding name-collisions in a system-wide installation of charybdis. The ssld and bandb daemons, intended to be directly used by ircd and not the user, install into libexec when --enable-fhs-paths is set. For binaries which are meant to be in PATH (bindir), such as ircd and viconf, there is now an option --with-program-prefix=progprefix inspired by automake. If the user specifies --with-program-prefix=charybdis, the ircd binary is named charybdisircd when installed. Add support for saving the pidfile to a rundir and storing the ban database in localstatedir instead of in sysconfdir. This is, again, conditional on --enable-fhs-paths. Fix(?) genssl.sh to always write created SSL key/certificate/dh parameters to the sysconfdir specified during ./configure. The previous behavior was to assume that the user ran genssl.sh after ensuring that his current working directory was either sysconfdir or a sibling directory of sysconfdir.
2012-02-29 23:16:29 -05:00
William Pitcock 5ac470475d Add support for linking using SSL certificate fingerprints as the link credential rather than the traditional server-password pair. 2010-12-13 23:14:00 -06:00
B.Greenham a4d2230fbc Add extensions/m_roleplay, a module that provides various roleplaying commands. 2010-12-07 23:32:46 -05:00
Jilles Tjoelker 2606c73c6f Change max_bans in reference.conf from 25 to 100, like example.conf. 2010-12-05 16:51:48 +01:00
JD Horelick b0e752b0f9 Do not install ban .conf files (like kline.conf, rsv.conf, etc) as they aren't used anymore. 2010-12-04 17:29:01 -05:00
JD Horelick f5ed1007ba Make auth_user work with SASL and add it to the example configs. 2010-11-21 15:03:17 -05:00
JD Horelick 48e9e037f4 Fix up grammar in ShadowIRCd MOTD for great good! 2010-11-16 20:46:26 -05:00
JD Horelick ac10b333c7 Change the filenames of the generated SSL key/cert to ssl.* instead of test.* so that they're a bit more descriptive. 2010-11-13 16:07:54 -05:00
William Pitcock f4db473ce8 Example configuration: Set the default TLS port to 6697. 2010-09-17 10:48:56 -05:00
B.Greenham 331285b319 Clarify that serverhide::flatten_links disables /map for non-opers. 2010-10-12 13:30:27 -04:00
B.Greenham 07db71cda0 Fix VERSION and RPL_MYINFO to only show modes that are enabled. Also fix up some errors from the last commit. 2010-10-11 16:35:18 -04:00
B.Greenham 4c16b692f3 Add channel::disabledmodes.
This replaces use_invex, use_except, and use_forward, although
those options are still used internally and will continue to work
for users, to maintain config compatibility between charybdis
and shadowircd.
2010-10-11 14:12:52 -04:00
B.Greenham 4023293674 Merge. 2010-10-11 11:58:39 -04:00
B.Greenham 90728edb58 Backed out changeset 3097ade953f5
Backout modesets.

They're overly invasive and a bit uglier than is required.
The same thing can be accomplished in a better way with another method.
2010-10-11 11:58:21 -04:00
B.Greenham 1fe75e33cc mode api: Remove most modes from the chmode_table, and have them initialized in modeset files.
Modeset files are modules stored in shadowircd/modes. All they do is initalize
a set of modes on load, and orphan said modes on unload.

All cmodes not included in ircd-ratbox are now located in modeset files, rather
than being in the core. These modes no longer simply use defines, their
locations are stored in a the new struct module_modes. Each of these is set
when intializing the mode in the modeset files, and set to 0 when orphaning
the mode upon unloading the modeset file.

In addition, use_forward has been removed, as it is now obsoleted by modesets.
2010-07-02 19:09:46 -04:00
JD Horelick b25b4a7c5a Add InfoServ to the default aliases in ShadowIRCd.
Its now in Atheme and enabled by default in Atheme so it seems intelligent to
do so here.
2010-06-23 02:20:04 -04:00
JD Horelick fb06d910df SVN Id removal part two 2010-06-10 21:28:15 -04:00
JD Horelick 9f1913e7b8 Readd DroneBL to the list of default blacklist. Most of the trustworthiness
issues have been fixed. Keep EFNet RBL though. :)
2010-06-10 17:15:50 -04:00
William Pitcock 4ea91f08c5 Recommend EFNet's RBL instead of DroneBL due to trustworthiness issues.
(StaticBox policy change as of May 14, 2010.)
2010-05-14 08:49:26 -05:00
Stephen Bennett 6da02ba998 Update MLOCK protocol documentation to match changes in code 2010-05-02 22:18:13 +01:00
Jilles Tjoelker 9dc68130ea Improve technical documentation of BAN protocol. 2010-04-29 00:26:49 +02:00
JD Horelick 1add004b97 Change kicknorejoin to be hardcoded to 2 seconds instead of a
configurable opton.
2010-05-21 04:20:45 -04:00
JD Horelick fa6495b47f Clarify no_oper_flood option in the reference.conf 2010-04-08 21:41:15 -04:00
JD Horelick 1434082803 Change config option for ident_timeout to default_ident_timeout as jilles
recommended. Also update the TODO. Also, cocks.
2010-04-05 16:29:11 -04:00
JD Horelick e50ed244f4 Add a configuration option for ident_timeout. 2010-04-05 15:28:44 -04:00
JD Horelick ef07b59ac8 Add helpchan and helpurl that tell users the official help channel
and (optionally) link them to your network's specific helppages on
the intertubes. It is shown in /quote help (with no extra parameters).
2010-03-28 14:08:47 -04:00
Jilles Tjoelker 9b9d818b32 Add propagated resvs, like klines and xlines. 2010-03-27 16:13:57 +01:00
Jilles Tjoelker 112e8a666b Add propagated xlines, like klines. 2010-03-16 23:05:50 +01:00
JD Horelick 504f309e38 Add option general::use_propagated_bans to allow disabling new KLINE.
If this option is yes (default), KLINE by itself sets global (propagated) bans.
If this option is no, KLINE by itself sets a local kline following cluster{},
compatible with 3.2 and older versions.
2010-03-27 14:58:04 -04:00
William Pitcock cb2f3005bd Add syntax description of MLOCK message to ts6-protocol.txt. 2010-03-07 21:51:41 -06:00
JD Horelick 9fc5811f79 Add GroupServ aliases to the shadowircd configs by default. 2010-09-04 18:31:18 -04:00
Jilles Tjoelker 9e94d9ea13 Add target change for channels.
This has a separate enabling option channel::channel_target_change.

It applies to PRIVMSG, NOTICE and TOPIC by unvoiced unopped non-opers.

The same slots are used for channels and users.
2010-08-28 20:02:42 -04:00
B.Greenham d7a3d23cdd Add channel::admin_on_channel_create, which gives users creating new channels +ao instead of +o, if enabled. 2010-07-29 14:22:33 -04:00
JD Horelick 6898ce9dde Add general::hide_channel_below_users option.
This allows server owners to set how many users must be in a channel before
/LIST will show it.
2010-07-10 01:28:21 -04:00
Jilles Tjoelker 517967618d Document BAN message. 2010-03-07 14:06:28 +01:00
B.Greenham b791dea807 Some reference.conf cleanups. 2010-03-25 23:10:52 -04:00
JD Horelick 069f104a2e Add shared::modules option, remote module stuff coming later/soon. 2010-03-24 15:50:15 -04:00
JD Horelick 74e3e4f1e2 Add DIE shared option for remote restart and die which are on their
way next.
2010-03-23 14:19:48 -04:00
JD Horelick 706f2ddf1a Add the note that no_oper_flood needs to be enabled for true_no_oper_flood
to work correctly.
2010-03-21 01:06:57 -04:00
JD Horelick 1cc810d3a7 Add general::true_no_oper_flood . I'm not going to explain it here.
Ask me what it does on IRC if you're curious.
2010-03-21 00:14:02 -04:00
B.Greenham baca17aeb3 Some minor conf cleanups. 2010-03-18 13:50:47 -04:00
JD Horelick 853058531a Added m_cycle and added it to all the appropriate locations. 2010-03-15 15:35:32 -04:00
B.Greenham 3c0f833420 Add OKICK to documentation. 2010-03-14 17:25:53 -04:00
JD Horelick f55bba7c8a Some work on the oper-guide, more coming when i feel like it.
Have I ever mentioned how much i hate markup languages? No? Damn.
2010-03-14 00:52:41 -05:00
B.Greenham 6b2d7a74ce Fix some indentation in reference.conf. 2010-03-13 23:26:23 -05:00
JD Horelick e78f685073 Add use_part_messages config option. When disabled, this will show
all PARTs without a message/reason. Recommended to set to no if
a static quit message is set.
2010-03-13 22:56:38 -05:00
JD Horelick c0e2aa60b8 Added static_quit support. Pretty much what the name implies. 2010-03-13 22:19:29 -05:00
B.Greenham c1c91f9438 s/owner/admin/ throughout the source code and docs. 2010-03-07 23:18:39 -05:00
JD Horelick 82e5490f59 Add m_webirc to "default" loaded extensions in .conf files and
add a WEBIRC auth {} block for it to show how its used so you
don't have to read the source of the extension to figure it out.
2010-03-07 17:13:46 -05:00