e8da6ccee6
Add explicit support for being installed into a system triggered with --enable-fhs-paths.
...
Add two mechanism for avoiding name-collisions in a system-wide installation of charybdis. The ssld and bandb daemons, intended to be directly used by ircd and not the user, install into libexec when --enable-fhs-paths is set. For binaries which are meant to be in PATH (bindir), such as ircd and viconf, there is now an option --with-program-prefix=progprefix inspired by automake. If the user specifies --with-program-prefix=charybdis, the ircd binary is named charybdisircd when installed. Add support for saving the pidfile to a rundir and storing the ban database in localstatedir instead of in sysconfdir. This is, again, conditional on --enable-fhs-paths. Fix(?) genssl.sh to always write created SSL key/certificate/dh parameters to the sysconfdir specified during ./configure. The previous behavior was to assume that the user ran genssl.sh after ensuring that his current working directory was either sysconfdir or a sibling directory of sysconfdir.
2012-02-29 23:16:29 -05:00
5ac470475d
Add support for linking using SSL certificate fingerprints as the link credential rather than the traditional server-password pair.
2010-12-13 23:14:00 -06:00
a4d2230fbc
Add extensions/m_roleplay, a module that provides various roleplaying commands.
2010-12-07 23:32:46 -05:00
2606c73c6f
Change max_bans in reference.conf from 25 to 100, like example.conf.
2010-12-05 16:51:48 +01:00
b0e752b0f9
Do not install ban .conf files (like kline.conf, rsv.conf, etc) as they aren't used anymore.
2010-12-04 17:29:01 -05:00
f5ed1007ba
Make auth_user work with SASL and add it to the example configs.
2010-11-21 15:03:17 -05:00
48e9e037f4
Fix up grammar in ShadowIRCd MOTD for great good!
2010-11-16 20:46:26 -05:00
ac10b333c7
Change the filenames of the generated SSL key/cert to ssl.* instead of test.* so that they're a bit more descriptive.
2010-11-13 16:07:54 -05:00
f4db473ce8
Example configuration: Set the default TLS port to 6697.
2010-09-17 10:48:56 -05:00
331285b319
Clarify that serverhide::flatten_links disables /map for non-opers.
2010-10-12 13:30:27 -04:00
07db71cda0
Fix VERSION and RPL_MYINFO to only show modes that are enabled. Also fix up some errors from the last commit.
2010-10-11 16:35:18 -04:00
4c16b692f3
Add channel::disabledmodes.
...
This replaces use_invex, use_except, and use_forward, although
those options are still used internally and will continue to work
for users, to maintain config compatibility between charybdis
and shadowircd.
2010-10-11 14:12:52 -04:00
4023293674
Merge.
2010-10-11 11:58:39 -04:00
90728edb58
Backed out changeset 3097ade953f5
...
Backout modesets.
They're overly invasive and a bit uglier than is required.
The same thing can be accomplished in a better way with another method.
2010-10-11 11:58:21 -04:00
1fe75e33cc
mode api: Remove most modes from the chmode_table, and have them initialized in modeset files.
...
Modeset files are modules stored in shadowircd/modes. All they do is initalize
a set of modes on load, and orphan said modes on unload.
All cmodes not included in ircd-ratbox are now located in modeset files, rather
than being in the core. These modes no longer simply use defines, their
locations are stored in a the new struct module_modes. Each of these is set
when intializing the mode in the modeset files, and set to 0 when orphaning
the mode upon unloading the modeset file.
In addition, use_forward has been removed, as it is now obsoleted by modesets.
2010-07-02 19:09:46 -04:00
b25b4a7c5a
Add InfoServ to the default aliases in ShadowIRCd.
...
Its now in Atheme and enabled by default in Atheme so it seems intelligent to
do so here.
2010-06-23 02:20:04 -04:00
fb06d910df
SVN Id removal part two
2010-06-10 21:28:15 -04:00
9f1913e7b8
Readd DroneBL to the list of default blacklist. Most of the trustworthiness
...
issues have been fixed. Keep EFNet RBL though. :)
2010-06-10 17:15:50 -04:00
4ea91f08c5
Recommend EFNet's RBL instead of DroneBL due to trustworthiness issues.
...
(StaticBox policy change as of May 14, 2010.)
2010-05-14 08:49:26 -05:00
6da02ba998
Update MLOCK protocol documentation to match changes in code
2010-05-02 22:18:13 +01:00
9dc68130ea
Improve technical documentation of BAN protocol.
2010-04-29 00:26:49 +02:00
1add004b97
Change kicknorejoin to be hardcoded to 2 seconds instead of a
...
configurable opton.
2010-05-21 04:20:45 -04:00
fa6495b47f
Clarify no_oper_flood option in the reference.conf
2010-04-08 21:41:15 -04:00
1434082803
Change config option for ident_timeout to default_ident_timeout as jilles
...
recommended. Also update the TODO. Also, cocks.
2010-04-05 16:29:11 -04:00
e50ed244f4
Add a configuration option for ident_timeout.
2010-04-05 15:28:44 -04:00
ef07b59ac8
Add helpchan and helpurl that tell users the official help channel
...
and (optionally) link them to your network's specific helppages on
the intertubes. It is shown in /quote help (with no extra parameters).
2010-03-28 14:08:47 -04:00
9b9d818b32
Add propagated resvs, like klines and xlines.
2010-03-27 16:13:57 +01:00
112e8a666b
Add propagated xlines, like klines.
2010-03-16 23:05:50 +01:00
504f309e38
Add option general::use_propagated_bans to allow disabling new KLINE.
...
If this option is yes (default), KLINE by itself sets global (propagated) bans.
If this option is no, KLINE by itself sets a local kline following cluster{},
compatible with 3.2 and older versions.
2010-03-27 14:58:04 -04:00
cb2f3005bd
Add syntax description of MLOCK message to ts6-protocol.txt.
2010-03-07 21:51:41 -06:00
9fc5811f79
Add GroupServ aliases to the shadowircd configs by default.
2010-09-04 18:31:18 -04:00
9e94d9ea13
Add target change for channels.
...
This has a separate enabling option channel::channel_target_change.
It applies to PRIVMSG, NOTICE and TOPIC by unvoiced unopped non-opers.
The same slots are used for channels and users.
2010-08-28 20:02:42 -04:00
d7a3d23cdd
Add channel::admin_on_channel_create, which gives users creating new channels +ao instead of +o, if enabled.
2010-07-29 14:22:33 -04:00
6898ce9dde
Add general::hide_channel_below_users option.
...
This allows server owners to set how many users must be in a channel before
/LIST will show it.
2010-07-10 01:28:21 -04:00
517967618d
Document BAN message.
2010-03-07 14:06:28 +01:00
b791dea807
Some reference.conf cleanups.
2010-03-25 23:10:52 -04:00
069f104a2e
Add shared::modules option, remote module stuff coming later/soon.
2010-03-24 15:50:15 -04:00
74e3e4f1e2
Add DIE shared option for remote restart and die which are on their
...
way next.
2010-03-23 14:19:48 -04:00
706f2ddf1a
Add the note that no_oper_flood needs to be enabled for true_no_oper_flood
...
to work correctly.
2010-03-21 01:06:57 -04:00
1cc810d3a7
Add general::true_no_oper_flood . I'm not going to explain it here.
...
Ask me what it does on IRC if you're curious.
2010-03-21 00:14:02 -04:00
baca17aeb3
Some minor conf cleanups.
2010-03-18 13:50:47 -04:00
853058531a
Added m_cycle and added it to all the appropriate locations.
2010-03-15 15:35:32 -04:00
3c0f833420
Add OKICK to documentation.
2010-03-14 17:25:53 -04:00
f55bba7c8a
Some work on the oper-guide, more coming when i feel like it.
...
Have I ever mentioned how much i hate markup languages? No? Damn.
2010-03-14 00:52:41 -05:00
6b2d7a74ce
Fix some indentation in reference.conf.
2010-03-13 23:26:23 -05:00
e78f685073
Add use_part_messages config option. When disabled, this will show
...
all PARTs without a message/reason. Recommended to set to no if
a static quit message is set.
2010-03-13 22:56:38 -05:00
c0e2aa60b8
Added static_quit support. Pretty much what the name implies.
2010-03-13 22:19:29 -05:00
c1c91f9438
s/owner/admin/ throughout the source code and docs.
2010-03-07 23:18:39 -05:00
82e5490f59
Add m_webirc to "default" loaded extensions in .conf files and
...
add a WEBIRC auth {} block for it to show how its used so you
don't have to read the source of the extension to figure it out.
2010-03-07 17:13:46 -05:00
2ec04d9c3b
Cleanup reference.conf a bit.
2010-03-06 15:58:15 -05:00
Nathan Phillip Brink
William Pitcock
B.Greenham
Jilles Tjoelker
JD Horelick
B.Greenham
Stephen Bennett