Nix flakes 3 (#453)

* blog: add third nix flakes post

Signed-off-by: Xe <me@christine.website>

* make nix flakes post 3 better, thanks open

Signed-off-by: Xe Iaso <me@christine.website>
This commit is contained in:
Cadey Ratio 2022-04-06 21:43:45 -04:00 committed by GitHub
parent 6b771b5503
commit 449ddabce1
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
3 changed files with 456 additions and 12 deletions

View File

@ -136,7 +136,10 @@ Then you can look at `flake.nix` to see what's up:
pkgs = nixpkgsFor.${system}; pkgs = nixpkgsFor.${system};
in in
{ {
go-hello = pkgs.buildGoModule { # The default package for 'nix build'. This makes sense if the
# flake provides only one package or there is a clear "main"
# package.
default = pkgs.buildGoModule {
pname = "go-hello"; pname = "go-hello";
inherit version; inherit version;
# In 'nix develop', we don't need a copy of the source tree # In 'nix develop', we don't need a copy of the source tree
@ -156,11 +159,6 @@ Then you can look at `flake.nix` to see what's up:
vendorSha256 = "sha256-pQpattmS9VmO3ZIQUFn66az8GSmB4IvYhTTCFn6SUmo="; vendorSha256 = "sha256-pQpattmS9VmO3ZIQUFn66az8GSmB4IvYhTTCFn6SUmo=";
}; };
}); });
# The default package for 'nix build'. This makes sense if the
# flake provides only one package or there is a clear "main"
# package.
defaultPackage = forAllSystems (system: self.packages.${system}.go-hello);
}; };
} }
``` ```
@ -197,7 +195,6 @@ Let's take a closer look at the higher level things in the flake:
outputs = { self, nixpkgs }: { outputs = { self, nixpkgs }: {
packages = { ... }; packages = { ... };
defaultPackage = { ... };
}; };
} }
``` ```
@ -462,7 +459,7 @@ nixosModules.bot = { config, lib, ... }: {
Group = "mara-bot"; Group = "mara-bot";
Restart = "always"; Restart = "always";
WorkingDirectory = "/var/lib/mara-bot"; WorkingDirectory = "/var/lib/mara-bot";
ExecStart = "${self.defaultPackage."${system}"}/bin/mara"; ExecStart = "${self.packages."${system}".default}/bin/mara";
}; };
}; };
}; };

View File

@ -19,6 +19,10 @@ chance of bitrotting. I will make every attempt to update it if things change,
however flakes have been fairly consistent for a few years however flakes have been fairly consistent for a few years
now.](conversation://Cadey/coffee) now.](conversation://Cadey/coffee)
[EDIT(20220327 14:13): A previous version of this article said to use
`defaultPackage` for the default package. This is deprecated and you should use
`packages.default` instead.](conversation://Cadey/coffee)
</div> </div>
[What is a package? I've seen this term thrown around with phrases like "Nix is a [What is a package? I've seen this term thrown around with phrases like "Nix is a
@ -180,10 +184,10 @@ web server template by defining another package:
```nix ```nix
# flake.nix # flake.nix
# after defaultPackage
packages = { packages = {
default = ...;
docker = let docker = let
web = self.defaultPackage.${system}; web = self.packages.${system}.default;
in pkgs.dockerTools.buildLayeredImage { in pkgs.dockerTools.buildLayeredImage {
name = web.pname; name = web.pname;
tag = web.version; tag = web.version;
@ -373,7 +377,7 @@ the systemd unit:
web-service = pkgs.substituteAll { web-service = pkgs.substituteAll {
name = "web-server.service"; name = "web-server.service";
src = ./systemd/web-server.service.in; src = ./systemd/web-server.service.in;
web = self.defaultPackage.${system}; web = self.packages.${system}.default;
}; };
``` ```
@ -399,7 +403,7 @@ Then you can add the bit that builds the portable service:
```nix ```nix
portable = let portable = let
web = self.defaultPackage.${system}; web = self.packages.${system}.default;
in pkgs.portableService { in pkgs.portableService {
inherit (web) version; inherit (web) version;
name = web.pname; name = web.pname;

View File

@ -0,0 +1,443 @@
---
title: "Nix Flakes: Exposing and using NixOS Modules"
date: 2022-04-07
series: nix-flakes
tags:
- nixos
vod:
twitch: https://www.twitch.tv/videos/1437346416
youtube: https://youtu.be/wCZ9SwmgSck
---
Nix flakes allow you to expose NixOS modules. NixOS modules are templates for
system configuration and they are the basis of how you configure NixOS. Today
we're going to take our Nix flake [from the last
article](/blog/nix-flakes-2-2022-02-27) and write a NixOS module for it so that
we can deploy it to a container running locally. In the next post we will deploy
this to a server.
[If you haven't read <a href="/blog/series/nix-flakes">the other articles in
this series</a>, you probably should. This article builds upon the previous
ones.](conversation://Mara/hacker)
NixOS modules are building blocks that let you configure NixOS servers. Modules
expose customizable options that expand out into system configuration.
Individually, each module is fairly standalone and self-contained, but they
build up together into your server configuration like a bunch of legos build
into a house. Each module describes a subset of your desired system
configuration and any options relevant to that configuration.
[You can think about them like Ansible playbooks, but NixOS modules describe the
desired end state instead of the steps you need to get to that end
state. It's the end result of evaluating all of your options against all of the
modules that you use in your configuration.](conversation://Mara/hacker)
NixOS modules are functions that take in the current state of the system and
then return things to add to the state of the system. Here is a basic NixOS
module that enables [nginx](https://nginx.org/):
```nix
{ config, pkgs, lib, ... }:
{
config = {
services.nginx.enable = true;
};
}
```
This function takes in the state of the world and returns additions to the state
of the world. This will use the nginx module that ships with NixOS to give you a
basic nginx setup that has the upstream default configuration in it.
NixOS has a way to run other instances of NixOS with [NixOS
containers](https://nixos.org/manual/nixos/stable/index.html#ch-containers). We
can use them to test our NixOS module as we write it.
[This probably won't work on a non-NixOS machine. You will need to
install NixOS in order to test this. For an easy way to do this, see <a
href="https://github.com/elitak/nixos-infect">nixos-infect</a>, a script you can
put into a cloudconfig when spinning up a new server. You can also <a
href="https://nixos.org/manual/nixos/stable/index.html#sec-installation">install
NixOS manually</a> in a VM, but for now it may be better to use a cloud server
as the path of least resistance. Installing NixOS with a flake will be a part of
a future article in this series.](conversation://Mara/hacker)
In Nix you can merge two attribute sets using the `//` operator. This allows you
to add two attribute sets into one larger one, such as like this:
```
nix-repl> { foo = 1; } // { bar = 2; }
{ bar = 2; foo = 1; }
```
<xeblog-conv name="Mara" mood="hacker">
Important pro tip: the merge operator is NOT recursive. If you try to do
something like:
```
nix-repl> foo = { bar = { baz = "foo"; }; }
nix-repl> (foo // { bar = { spam = "eggs"; }; }).bar
```
You will get:
```
{ spam = "eggs"; }
```
And not:
```
{ baz = "foo"; spam = "eggs"; }
```
This is because the `//` operator prefers things in the right hand side over the
left hand side if both conflict. To recursively merge two attribute sets (using
all elements from both sides), use
[lib.recursiveUpdate](https://nixos.org/manual/nixpkgs/stable/#function-library-lib.attrsets.recursiveUpdate):
```
nix-repl> (pkgs.lib.recursiveUpdate foo bar).bar
{ baz = "foo"; spam = "eggs"; }
```
</xeblog-conv>
We will use this to add the container configuration to the flake at the end of
the flake.nix file. We need to do this because the upper part of the flake with
the `forAllSystems` call will generate a bunch of system-specific attributes for
each system we support. NixOS configurations don't support this level of
granularity.
At the end of your flake.nix (just before the final closing `}`), there should
be a line that looks like this:
```nix
});
```
This is what terminates the `outputs` declaration from all the way at the top.
In order to add the container configuration, you should change this to look like
this:
```nix
}) // {
};
```
Then we can add the container configuration to the flake:
```nix
}) // {
nixosConfigurations.container = nixpkgs.lib.nixosSystem {
system = "x86_64-linux";
modules = [
({pkgs, ...}: {
# Only allow this to boot as a container
boot.isContainer = true;
networking.hostName = "gohello";
# Allow nginx through the firewall
networking.firewall.allowedTCPPorts = [ 80 ];
services.nginx.enable = true;
})
];
};
};
```
This will create a container (with the hostname "gohello") that starts nginx and
allows traffic to go to nginx on TCP port 80. You can start up the container
with the `nixos-container` command:
```console
$ sudo nixos-container create gohello --flake .#container
host IP is 10.233.1.1, container IP is 10.233.1.2
```
Then you can start the container with this command:
```console
$ sudo nixos-container start gohello
```
And then we can try to connect to nginx to see if it's working:
```console
$ curl http://10.233.1.2
<!DOCTYPE html>
<html>
<head>
<title>Welcome to nginx!</title>
<style>
body {}
width: 35em;
margin: 0 auto;
font-family: Tahoma, Verdana, Arial, sans-serif;
}
</style>
</head>
<body>
<h1>Welcome to nginx!</h1>
<p>If you see this page, the nginx web server is successfully installed and
working. Further configuration is required.</p>
<p>For online documentation and support please refer to
<a href="http://nginx.org/">nginx.org</a>.<br/>
Commercial support is available at
<a href="http://nginx.com/">nginx.com</a>.</p>
<p><em>Thank you for using nginx.</em></p>
</body>
</html>
```
We have nginx!
Now that we have our container to test with, let's write the configuration for
the service. At a basic level we need the following things:
- A systemd unit for orchestrating the HTTP server process
- nginx configuration to reverse proxy to that HTTP server
Above the container definition, add this basic NixOS module template:
```nix
nixosModule = { config, lib, pkgs, ... }:
with lib;
let cfg = config.xeserv.services.gohello;
in {
options.xeserv.services.gohello = {
enable = mkEnableOption "Enables the gohello HTTP service";
};
config = mkIf cfg.enable {
};
};
```
This will create a NixOS module that will only be enabled when the configuration
setting `xeserv.services.gohello.enable` is set to `true`. Everything else we do
here will build on this.
[You can and probably do want to change the namespace `xeserv` here, it is a
placeholder that is not likely to conflict with anything
else.](conversation://Mara/happy)
Create a basic systemd service with this template:
```nix
config = mkIf cfg.enable {
systemd.services."xeserv.gohello" = {
wantedBy = [ "multi-user.target" ];
serviceConfig = let pkg = self.packages.${system}.default;
in {
Restart = "on-failure";
ExecStart = "${pkg}/bin/web-server";
DynamicUser = "yes";
RuntimeDirectory = "xeserv.gohello";
RuntimeDirectoryMode = "0755";
StateDirectory = "xeserv.gohello";
StateDirectoryMode = "0700";
CacheDirectory = "xeserv.gohello";
CacheDirectoryMode = "0750";
};
};
};
```
<xeblog-conv name="Mara" mood="hacker">
NOTE: If you have been following along since before this article was published,
you will want to be sure to do the following things to your copy of gohello:
* Move the definition of `defaultPackage` into the `packages` attribute set with
the name `default`
* Update `defaultApp` and the other entries to point to
`self.packages.${system}.default` instead of `self.defaultPackage.${system}`
We have updated previous articles and the template accordingly. Annoyingly it
seems that this change is new enough that it isn't totally documented on the
NixOS wiki. We are working on fixing this.
</xeblog-conv>
This will do the following things:
- Start the service on boot (`multi-user.target` fires once the system is "fully
booted" and the network is active)
- Automatically restarts the service when it crashes
- Starts our `web-server` binary when running the service
- Creates a random, unique user account for the service (see
[here](http://0pointer.net/blog/dynamic-users-with-systemd.html) for more
information on how/why this works)
- Creates temporary, home and cache directories for the service, makes sure that
random user has permission to use them (with the specified directory modes
too)
- Enables the service automatically
Then you need to add the nginx configuration. We want this application to have
its own virtual host, so we will need to add that as a configuration option
under the `enable` option:
```nix
domain = mkOption rec {
type = types.str;
default = "gohello.local.cetacean.club";
example = default;
description = "The domain name for gohello";
};
```
[Pro tip: `anything.local.cetacean.club` points to `127.0.0.1`. You can use this
when testing things.](conversation://Mara/happy)
And then we can add the nginx configuration under the systemd service definition:
```nix
services.nginx.virtualHosts.${cfg.domain} = {
locations."/" = { proxyPass = "http://127.0.0.1:3031"; };
};
```
Your module should look like this:
```nix
nixosModule = { config, lib, pkgs, ... }:
with lib;
let cfg = config.xeserv.services.gohello;
in {
options.xeserv.services.gohello = {
enable = mkEnableOption "Enables the gohello HTTP service";
domain = mkOption rec {
type = types.str;
default = "gohello.local.cetacean.club";
example = default;
description = "The domain name for gohello";
};
};
config = mkIf cfg.enable {
systemd.services."xeserv.gohello" = {
wantedBy = [ "multi-user.target" ];
serviceConfig = let pkg = self.packages.${pkgs.system}.default;
in {
Restart = "on-failure";
ExecStart = "${pkg}/bin/web-server";
DynamicUser = "yes";
RuntimeDirectory = "xeserv.gohello";
RuntimeDirectoryMode = "0755";
StateDirectory = "xeserv.gohello";
StateDirectoryMode = "0700";
CacheDirectory = "xeserv.gohello";
CacheDirectoryMode = "0750";
};
};
services.nginx.virtualHosts.${cfg.domain} = {
locations."/" = { proxyPass = "http://127.0.0.1:3031"; };
};
};
};
```
[The service name is overly defensive. It's intended to avoid conflicting with
any other unit on the system named `gohello.service`. Feel free to remove this
part, it is really just defensive devops by design to avoid name
conflicts.](conversation://Mara/hacker)
Then you can add it to the container by importing our new module in its
configuration and activating the gohello service:
```nix
nixosConfigurations.container = nixpkgs.lib.nixosSystem {
system = "x86_64-linux";
modules = [
self.nixosModule
({ pkgs, ... }: {
# Only allow this to boot as a container
boot.isContainer = true;
# Allow nginx through the firewall
networking.firewall.allowedTCPPorts = [ 80 ];
services.nginx.enable = true;
xeserv.services.gohello.enable = true;
})
];
};
```
Then you can update the container's configuration with this command:
```console
$ sudo nixos-container update gohello --flake .#container
reloading container...
```
And finally make a request to the gohello service running in that container:
```console
$ curl http://10.233.1.2 -H "Host: gohello.local.cetacean.club"
hello world :)
```
<xeblog-conv name="Mara" mood="hacker">
Exercises for the reader:
Try adding a [nixos
option](https://nixos.org/manual/nixos/stable/index.html#sec-writing-modules)
that correlates to the `--bind` flag that `gohello` uses as the TCP
address to serve HTTP from. You will want to have the type be
`types.port`. If you are stuck, see
[here](https://github.com/Xe/nixos-configs/tree/master/common/services) for inspiration.
Also try adding `AmbientCapabilities = "CAP_NET_BIND_SERVICE"` and
`CapabilityBoundingSet = "CAP_NET_BIND_SERVICE"` to your `serviceConfig` and
bind `gohello` to port 80 without nginx involved at all.
</xeblog-conv>
You can delete this container with `sudo nixos-container destroy gohello` when
you are done with it.
These are the basics on how to use NixOS modules. Everything else you can do
with them builds off of these fundamental ideas. Modules are templates that
coordinate packages and configuration into your desired system state. Containers
can let you test out modules without having to add them to your currently
running system. Modules declare options and emit configuration based on those
options.
You can also consume NixOS modules from flakes using the input system, however I
will go into more details about this at a later date. If you want more examples
of NixOS modules, I would suggest checking out my
[nixos-configs](https://github.com/Xe/nixos-configs) repository. I have nearly
everything neatly modularized and configurable. If you see anything in there
that is confusing to you, please [reach out](/contact) and ask. I am happy to
answer your questions and your feedback will help me write future posts in this
series.
I also have my "next generation" flakes-based configuration experiments
[here](https://tulpa.dev/cadey/nixos-configs) if you want to read through those.
I have still been porting over things piecemeal, so it is not a complete replica
of my existing configuration.
Next time I will cover how to install NixOS to a server and deploy system
configurations using [deploy-rs](https://github.com/serokell/deploy-rs). This
will allow you to have your workstation build configuration for your servers and
push out all the changes from there.
---
Many thanks to Open Skies for being my fearless editor that helps make these
things shine.
In part of this post I use my new Xeact-powered HTML component for some of the
conversation fragments, but the sizing was off on my iPhone when I tested it. If
you know what I am doing wrong, please [get in touch](/contact).