blog: add third nix flakes post

Signed-off-by: Xe <me@christine.website>
This commit is contained in:
Cadey Ratio 2022-03-26 18:27:06 +00:00
parent cb65b7b037
commit 451d49ee15
3 changed files with 377 additions and 12 deletions

View File

@ -136,7 +136,10 @@ Then you can look at `flake.nix` to see what's up:
pkgs = nixpkgsFor.${system}; pkgs = nixpkgsFor.${system};
in in
{ {
go-hello = pkgs.buildGoModule { # The default package for 'nix build'. This makes sense if the
# flake provides only one package or there is a clear "main"
# package.
default = pkgs.buildGoModule {
pname = "go-hello"; pname = "go-hello";
inherit version; inherit version;
# In 'nix develop', we don't need a copy of the source tree # In 'nix develop', we don't need a copy of the source tree
@ -156,11 +159,6 @@ Then you can look at `flake.nix` to see what's up:
vendorSha256 = "sha256-pQpattmS9VmO3ZIQUFn66az8GSmB4IvYhTTCFn6SUmo="; vendorSha256 = "sha256-pQpattmS9VmO3ZIQUFn66az8GSmB4IvYhTTCFn6SUmo=";
}; };
}); });
# The default package for 'nix build'. This makes sense if the
# flake provides only one package or there is a clear "main"
# package.
defaultPackage = forAllSystems (system: self.packages.${system}.go-hello);
}; };
} }
``` ```
@ -197,7 +195,6 @@ Let's take a closer look at the higher level things in the flake:
outputs = { self, nixpkgs }: { outputs = { self, nixpkgs }: {
packages = { ... }; packages = { ... };
defaultPackage = { ... };
}; };
} }
``` ```
@ -462,7 +459,7 @@ nixosModules.bot = { config, lib, ... }: {
Group = "mara-bot"; Group = "mara-bot";
Restart = "always"; Restart = "always";
WorkingDirectory = "/var/lib/mara-bot"; WorkingDirectory = "/var/lib/mara-bot";
ExecStart = "${self.defaultPackage."${system}"}/bin/mara"; ExecStart = "${self.packages."${system}".default}/bin/mara";
}; };
}; };
}; };

View File

@ -19,6 +19,10 @@ chance of bitrotting. I will make every attempt to update it if things change,
however flakes have been fairly consistent for a few years however flakes have been fairly consistent for a few years
now.](conversation://Cadey/coffee) now.](conversation://Cadey/coffee)
[EDIT(20220327 14:13): A previous version of this article said to use
`defaultPackage` for the default package. This is deprecated and you should use
`packages.default` instead.](conversation://Cadey/coffee)
</div> </div>
[What is a package? I've seen this term thrown around with phrases like "Nix is a [What is a package? I've seen this term thrown around with phrases like "Nix is a
@ -180,10 +184,10 @@ web server template by defining another package:
```nix ```nix
# flake.nix # flake.nix
# after defaultPackage
packages = { packages = {
default = ...;
docker = let docker = let
web = self.defaultPackage.${system}; web = self.packages.${system}.default;
in pkgs.dockerTools.buildLayeredImage { in pkgs.dockerTools.buildLayeredImage {
name = web.pname; name = web.pname;
tag = web.version; tag = web.version;
@ -373,7 +377,7 @@ the systemd unit:
web-service = pkgs.substituteAll { web-service = pkgs.substituteAll {
name = "web-server.service"; name = "web-server.service";
src = ./systemd/web-server.service.in; src = ./systemd/web-server.service.in;
web = self.defaultPackage.${system}; web = self.packages.${system}.default;
}; };
``` ```
@ -399,7 +403,7 @@ Then you can add the bit that builds the portable service:
```nix ```nix
portable = let portable = let
web = self.defaultPackage.${system}; web = self.packages.${system}.default;
in pkgs.portableService { in pkgs.portableService {
inherit (web) version; inherit (web) version;
name = web.pname; name = web.pname;

View File

@ -0,0 +1,364 @@
---
title: "Nix Flakes: Exposing and using NixOS Modules"
date: 2022-03-31
series: nix-flakes
tags:
- nixos
vod:
twitch: https://www.twitch.tv/videos/1437346416
youtube: https://youtu.be/wCZ9SwmgSck
---
Nix flakes allow you to expose NixOS modules. NixOS modules are templates for
system configuration and they are the basis of how you configure NixOS. Today
we're going to take our Nix flake [from the last
article](/blog/nix-flakes-2-2022-02-27) and write a NixOS module for it so that
we can deploy it to a server.
[If you haven't read <a href="/blog/series/nix-flakes">the other articles in
this series</a>, you probably should. This article builds upon the previous
ones.](conversation://Mara/hacker)
NixOS modules are the main building block of how NixOS servers are configured.
They are like lego blocks that help you build up a server from off the shelf
parts. A module describes a desired system state and they build off of eachother
in order to end up with a more elaborate result.
[You can think about them like Ansible playbooks, but NixOS modules describe the
desired end state instead of the steps you need to get to that end
state.](conversation://Mara/hacker)
NixOS modules are functions that take in the current state of the system and
then return things to add to the state of the system. Here is a basic NixOS
module that enables [nginx](https://nginx.org/):
```nix
{ config, pkgs, lib, ... }:
{
config = {
services.nginx.enable = true;
};
}
```
This function takes in the state of the world and returns additions to the state
of the world. This will use the nginx module that ships with NixOS to give you a
basic nginx setup that has the upstream default configuration in it.
NixOS has a way to run other instances of NixOS with [NixOS
containers](https://nixos.org/manual/nixos/stable/index.html#ch-containers). We
can use them to test our NixOS module as we write it.
[This probably won't work on a non-NixOS machine. You will need to
install NixOS in order to test this. For an easy way to do this, see <a
href="https://github.com/elitak/nixos-infect">nixos-infect</a>, a script you can
put into a cloudconfig when spinning up a new server. You can also <a
href="https://nixos.org/manual/nixos/stable/index.html#sec-installation">install
NixOS manually</a> in a VM, but for now it may be better to use a cloud server
as the path of least resistance. Installing NixOS with a flake will be a part of
a future article in this series.](conversation://Mara/hacker)
In Nix you can merge two attribute sets using the `//` operator. This allows you
to add two attribute sets into one larger one, such as like this:
```
nix-repl> { foo = 1; } // { bar = 2; }
{ bar = 2; foo = 1; }
```
We will use this to add the container configuration to the flake at the end of
the flake.nix file. At the end of your flake.nix (just before the final closing
`}`), there should be a line that looks like this:
```nix
});
```
This is what terminates the `outputs` declaration from all the way at the top.
In order to add the container configuration, you should change this to look like
this:
```nix
}) // {
};
```
Then we can add the container configuration to the flake:
```nix
}) // {
nixosConfigurations.container = nixpkgs.lib.nixosSystem {
system = "x86_64-linux";
modules = [
({pkgs, ...}: {
# Only allow this to boot as a container
boot.isContainer = true;
networking.hostName = "gohello";
# Allow nginx through the firewall
networking.firewall.allowedTCPPorts = [ 80 ];
services.nginx.enable = true;
})
];
};
};
```
This will create a container (with the hostname "gohello") that starts nginx and
allows traffic to go to nginx on TCP port 80. You can start up the container
with the `nixos-container` command:
```console
$ sudo nixos-container create gohello --flake .#container
host IP is 10.233.1.1, container IP is 10.233.1.2
```
Then you can start the container with this command:
```console
$ sudo nixos-container start gohello
```
And then we can try to connect to nginx to see if it's working:
```console
$ curl http://10.233.1.2
<!DOCTYPE html>
<html>
<head>
<title>Welcome to nginx!</title>
<style>
body {}
width: 35em;
margin: 0 auto;
font-family: Tahoma, Verdana, Arial, sans-serif;
}
</style>
</head>
<body>
<h1>Welcome to nginx!</h1>
<p>If you see this page, the nginx web server is successfully installed and
working. Further configuration is required.</p>
<p>For online documentation and support please refer to
<a href="http://nginx.org/">nginx.org</a>.<br/>
Commercial support is available at
<a href="http://nginx.com/">nginx.com</a>.</p>
<p><em>Thank you for using nginx.</em></p>
</body>
</html>
```
We have nginx!
Now that we have our container to test with, let's write the configuration for
the service. At a basic level we need the following things:
- A systemd unit for orchestrating the HTTP server process
- nginx configuration to reverse proxy to that HTTP server
Above the container definition, add this basic NixOS module template:
```nix
nixosModule = { config, lib, pkgs, ... }:
with lib;
let cfg = config.xeserv.services.gohello;
in {
options.xeserv.services.gohello = {
enable = mkEnableOption "Enables the gohello HTTP service";
};
config = mkIf cfg.enable {
};
};
```
This will create a NixOS module that will only be enabled when the configuration
setting `xeserv.services.gohello.enable` is set to `true`. Everything else we do
here will build on this.
[You can and probably do want to change the namespace `xeserv` here, it is a
placeholder that is not likely to conflict with anything
else.](conversation://Mara/happy)
Create a basic systemd service with this template:
```nix
config = mkIf cfg.enable {
systemd.services."xeserv.gohello" = {
wantedBy = [ "multi-user.target" ];
serviceConfig = let pkg = self.packages.${system}.default;
in {
Restart = "on-failure";
ExecStart = "${pkg}/bin/web-server";
DynamicUser = "yes";
RuntimeDirectory = "xeserv.gohello";
RuntimeDirectoryMode = "0755";
StateDirectory = "xeserv.gohello";
StateDirectoryMode = "0700";
CacheDirectory = "xeserv.gohello";
CacheDirectoryMode = "0750";
};
};
};
```
[NOTE: You will want to be sure to do the following things to your copy of
gohello: <ul><li>Move the definition of `defaultPackage` into the `packages` attribute set with the name `default` </li><li>Update `defaultApp` and the other entries to point to `self.packages.${system}.default` instead of `self.defaultPackage.${system}`</li></ul> We have updated previous articles and the template
accordingly.](conversation://Mara/hacker)
This will do the following things:
- Start the service on boot (`multi-user.target` fires once the system is "fully
booted" and the network is active)
- Automatically restarts the service when it crashes
- Starts our `web-server` binary when running the service
- Creates a random user for the service
- Creates temporary, home and cache directories for the service, makes sure that
random user has permission to use them (with the specified directory modes
too)
- Enables the service automatically
Then you need to add the nginx configuration. We want this application to have
its own virtual host, so we will need to add that as a configuration option
under the `enable` option:
```nix
domain = mkOption rec {
type = types.str;
default = "gohello.local.cetacean.club";
example = default;
description = "The domain name for gohello";
};
```
[Pro tip: `anything.local.cetacean.club` points to `127.0.0.1`. You can use this
when testing things.](conversation://Mara/happy)
And then we can add the nginx configuration under the systemd service definition:
```nix
services.nginx.virtualHosts.${cfg.domain} = {
locations."/" = { proxyPass = "http://127.0.0.1:3031"; };
};
```
Your module should look like this:
```nix
nixosModule = { config, lib, pkgs, ... }:
with lib;
let cfg = config.xeserv.services.gohello;
in {
options.xeserv.services.gohello = {
enable = mkEnableOption "Enables the gohello HTTP service";
domain = mkOption rec {
type = types.str;
default = "gohello.local.cetacean.club";
example = default;
description = "The domain name for gohello";
};
};
config = mkIf cfg.enable {
systemd.services."xeserv.gohello" = {
wantedBy = [ "multi-user.target" ];
serviceConfig = let pkg = self.packages.${pkgs.system}.default;
in {
Restart = "on-failure";
ExecStart = "${pkg}/bin/web-server";
DynamicUser = "yes";
RuntimeDirectory = "xeserv.gohello";
RuntimeDirectoryMode = "0755";
StateDirectory = "xeserv.gohello";
StateDirectoryMode = "0700";
CacheDirectory = "xeserv.gohello";
CacheDirectoryMode = "0750";
};
};
services.nginx.virtualHosts.${cfg.domain} = {
locations."/" = { proxyPass = "http://127.0.0.1:3031"; };
};
};
};
```
Then you can add it to the container by importing our new module in its
configuration and activating the gohello service:
```nix
nixosConfigurations.container = nixpkgs.lib.nixosSystem {
system = "x86_64-linux";
modules = [
self.nixosModule
({ pkgs, ... }: {
# Only allow this to boot as a container
boot.isContainer = true;
# Allow nginx through the firewall
networking.firewall.allowedTCPPorts = [ 80 ];
services.nginx.enable = true;
xeserv.services.gohello.enable = true;
})
];
};
```
Then you can update the container's configuration with this command:
```console
$ sudo nixos-container update gohello --flake .#container
reloading container...
```
And finally make a request to the gohello service running in that container:
```console
$ curl http://10.233.1.2 -H "Host: gohello.local.cetacean.club"
hello world :)
```
[As an exercise for the reader, try adding a <a
href="https://nixos.org/manual/nixos/stable/index.html#sec-writing-modules">nixos
option</a> that correlates to the `--bind` flag that `gohello` uses as the TCP
address to serve HTTP from. You will want to have the type be
`types.port`.](conversation://Mara/hacker)
You can delete this container with `sudo nixos-container destroy gohello` when
you are done with it.
These are the basics on how to use NixOS modules. Everything else you can do
with them builds off of these fundamental ideas. Modules are templates that
coordinate packages and configuration into your desired system state. Containers
can let you test out modules without having to add them to your currently
running system. Modules declare options and emit configuration based on those
options.
You can also consume NixOS modules from flakes using the input system, however I
will go into more details about this at a later date. If you want more examples
of NixOS modules, I would suggest checking out my
[nixos-configs](https://github.com/Xe/nixos-configs) repository. I have nearly
everything neatly modularized and configurable. If you see anything in there
that is confusing to you, please [reach out](/contact) and ask. I am happy to
answer your questions and your feedback will help me write future posts in this
series.
I also have my "next generation" flakes-based configuration experiments
[here](https://tulpa.dev/cadey/nixos-configs) if you want to read through those.
I have still been porting over things piecemeal, so it is not a complete replica
of my existing configuration.
Next time I will cover how to install NixOS to a server and deploy system
configurations using [deploy-rs](https://github.com/serokell/deploy-rs). This
will allow you to have your workstation build configuration for your servers and
push out all the changes from there.